Unconfigured Ad Widget

Collapse

55gr vs 62gr

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Army GI
    Veteran Member
    • Apr 2007
    • 4284

    55gr vs 62gr

    Hello,

    I just wanted some subjective observations on the lighter ammo vs heavier ones. I don't need a military history lesson, I know why the M855 came about.

    I've only fired the 62gr ammo in an M16A2, so I have nothing to compare it to. But now in the civilian world, the farthest I shoot my M4gery is 100 yards. Is there any noticeable difference in accuracy at 100 yards from an M4 barrel?

    What about recoil? Muzzle blast/flash? I doesn't seem to me that 7gr would make that much difference, but I guess in rifle cartridges traveling over 3000fps every gr counts.
    I purge the wicked. The impious madness must end. I shall be the instrument of Armageddon. It has gotten out of hand...
    WTB: Winchester /Miroki 1895 .30-06; No1. Mk. III SMLE .303 British; M96 Swedish Mauser 6.5x55mm; M39 Finnish Mosin 7.62x54r; S&W 625 .45 ACP; Glock 17.
  • #2
    Fjold
    I need a LIFE!!
    • Oct 2005
    • 23094

    At 100 yards the weight of the bullet wouldn't make a bit of difference so use what ever weight bullet shoots the best in your rifle.

    Muzzle flash, recoil etc. isn't going to vary enough to matter.
    Frank

    One rifle, one planet, Holland's 375




    Life Member NRA, CRPA and SAF

    Comment

    • #3
      rksimple
      Calguns Addict
      • Jan 2006
      • 6257

      At 100 yards, you won't notice a difference...especially killing paper.
      GAP Team Shooter 5

      Comment

      • #4
        ViPER395
        Calguns Addict
        • Feb 2007
        • 7865

        The accuracy/POI will probably vary a little. I've heard heavier weights are more accurate in faster bbls.

        1in9" twist like heavier grain bullets (i've heard 65gr+) than a 1in10" which will like a lighter band of weights.. something like 45-65gr. I forget. There's a chart someplace on the net about it i'm sure.
        Originally posted by Rainbow Warrior
        Liberals didn't invent douchebaggery but they certainly perfected it.

        Comment

        • #5
          Lon Moer
          Senior Member
          • Nov 2002
          • 653

          Ammo Oracle
          I've known daredevils and I ain't got nothing against them.....its just they're all dead.

          Comment

          • #6
            1911su16b870
            CGN/CGSSA Contributor
            CGN Contributor
            • Dec 2006
            • 7654

            The other day I actually tested this out with Fiocchi 55gr, Tap 60gr, Black Hills 68gr HPBT match and Federal 69gr Sierra HPBT match at 100-yards. 20-inch 1:9 barrel. All shot within 1MOA at 100-yards. Best results I obtained were with the 55gr at 1/2MOA and Tap at 0.6MOA. I did get one FTF with the Tap, the only one of the day.

            The Ammo Oracle link has some interesting reading on it.
            "Bruen, the Bruen opinion, I believe, discarded the intermediate scrutiny test that I also thought was not very useful; and has, instead, replaced it with a text history and tradition test." Judge Benitez 12-12-2022

            NRA Endowment Life Member, CRPA Life Member
            GLOCK (Gen 1-5, G42/43), Colt AR15/M16/M4, Sig P320, Sig P365, Beretta 90 series, Remington 870, HK UMP Factory Armorer
            Remington Nylon, 1911, HK, Ruger, Hudson H9 Armorer, just for fun!
            I instruct it if you shoot it.

            Comment

            • #7
              dasARguy
              Junior Member
              • Feb 2007
              • 32

              55gr 62gr and twist rate

              I couldn't help but respond to this... I recently read in a current gun mag about the initial mil spec twist rate spec for the m16 in the early days of its development. According to the article the M16 barrels had 1:14 twist rates and were incredibly devastating during their initial testing. During field tests the air force requested a 1:12 rate because of cold temp issues which lead to a complete change over to that twist rate and led to other changes in bullet weight/stability problems yada yada yada....The article summed up by saying that a return to that 1:14 twist would solve a lot of accuracy/stopping power issues. Can anyone enlighten me further regarding this?.... it appears that the most common twists are 1:8, 1:9 now. why is that???? Thanks

              Comment

              • #8
                Suvorov
                Senior Member
                • Sep 2007
                • 1391

                I've shot 55gr out of my 1:7 twist for years. Out to 100 yds I have never had any problem and often had sub MOA groups. Out at the longer ranges (to 300 yds), I never had any problems hitting the target.
                sigpic

                Comment

                • #9
                  Jicko
                  Calguns Addict
                  • Dec 2005
                  • 8774

                  Steel Core

                  The major different is the "steel core". Most ranges will NOT let you shoot those.

                  POI varies, therefore stick with 1 kind of ammo, so that your zero is maintained.
                  - LL
                  NRA Certified Firearm Instructor
                  sigpic

                  New to Calguns, check here first:
                  http://www.calguns.net/calgunforum/s...ad.php?t=56818

                  Comment

                  • #10
                    FlyingPen
                    Senior Member
                    • Dec 2007
                    • 2377

                    The steel core thing kind of sucks. 5.56 and 7.62x39 from Wolf is less than half the price of new brass.

                    Comment

                    • #11
                      Gnote
                      Senior Member
                      • Oct 2005
                      • 876

                      Please keep threads concerning ammunition under the Ammo and Reloading area.

                      Comment

                      Working...
                      UA-8071174-1