Unconfigured Ad Widget

Collapse

Using/making aluminum bullets?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    sloguy
    Senior Member
    • Aug 2007
    • 1999

    i would expect the aluminum bullet to move really fast and cause spectacular shallow wounds. am i thinking about this wrong?

    for instance, a 30-06 accelerator is 55 grain and moves 4080 fps. so, you could get similar velocity from a 30-06 cartridge but the projectile would be larger in size.

    or, could you have a longer bullet? same weight and velocity yes? but a longer bullet. would that do anything special?
    ----------------------------------------------------------------------------------------------------

    Originally posted by xrMike
    She's going to get sand in her action, if she's not careful.

    Comment

    • #17
      AfricanHunter
      Senior Member
      • Feb 2007
      • 1005

      The longer the bullet, the faster the rifling twist would have to be to adequately stabilize the projectile so w/o a specially built bbl I bet it would just tumble almost immediately.
      sigpic NRA Life Member

      Join The NRA

      Comment

      • #18
        wilit
        Calguns Addict
        • Dec 2005
        • 5217

        You could always swage your own using spent .22lr casings (if you're looking to make .223 rounds).

        "If a man hasn't found something worth dying for, he isn't fit to live." - Martin Luther King Jr.
        "Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety." - Benjamin Franklin
        "You have to be willing to swing your nuts like a deadblow hammer to put these jackasses in their place." - AJAX22
        "The best defense against usurpatory government is an assertive citizenry." - William F Buckley Jr.
        sigpic

        Comment

        • #19
          aplinker
          I need a LIFE!!
          • Feb 2007
          • 16762

          Aluminum INSTANTLY oxidizes in air. The surface oxide protects what's underneath.
          Originally posted by BillCA
          Short answer - yes, especially if you cast them.

          If you turn them from barstock, I'd think it would take a little while for new oxide to coat the bullet.

          Either way, you're gonna have a heck of an abrasive bullet. You'd have to lube the snot out of 'em I'd think.
          Last edited by aplinker; 01-11-2008, 12:54 AM.

          Google Map of OLL Dealers

          List of CA-friendly Manufacturers, Dealers, Middlemen, and Magazine rebuild kit dealers
          Click me-->So you're a n00b and you want to build an AR? <--Click me
          This post is based on actual events. Some facts may be altered for dramatic purposes. All posts are pure opinion. All persons, living and dead, are purely coincidental, and should not be construed.

          Comment

          • #20
            Rob P.
            Senior Member
            • Jul 2007
            • 1223

            Originally posted by ar15barrels
            When you wake up enough, I would like to see it.
            Does it have to do with armor piercing ability or something?
            Gah! I'm sick with the flu and can't concentrate enough to work. THIS SUCKS!

            FWIW, armor piercing ammo is defined in 18 USC sec. 921(a)(17).

            Here's a link to a nice write up on another site on this:

            Actualités, vie pratique et insolite : construction, info, économie. Tout pour suivre l'essentiel et l'inattendu du quotidien.


            As you can see, AP ammo is illegal for HANDGUNS. Brass bullets are AP under the fed law. BATFE supposedly will also enforce all AP ammo bans in ALL calibers for which there is a corresponding handgun.

            The bullet must be able to be used in a handgun. Rather than construing this to mean regular handgun calibers, ATF construes this to mean any caliber for which a handgun has been made, including handguns in rifle calibers, like .308 Winchester, and 7.62x39, for purposes of bullets covered by (B)(i). Thus bullets suitable for these calibers, as well as other rifle calibers for which handguns have been made (at least commercially made) which are constructed as described below would or should be AP ammo.
            So, word to the wise, do not melt your old cases to make bullets with.

            Comment

            • #21
              gunrun45
              Senior Member
              • Oct 2006
              • 2018

              I didn't realise IQ ammo was a zinc alloy.
              I can tell you that they really do work.
              I can't load ammo worth a darn but I have spent plenty of time firing them on LE ranges for LE classes into a variety of target media (animals, "jello", glass, cars, airplanes, cadavers, etc...) to demonstrate terminal balistics and penetration properties. This stuff was scarry effective and I'm glad that it isn't as easily found today as it was 4-5 years ago. That monsterous (in comparison to other more common styles) HP cavity provided for a large amount of target material to be displaced and it did almost always result in seperation of the projectile inside the target within standard FBI standards for handgun ammo.

              Glad I could provide a FNG question that fostered a little discussion
              Thanks for the educating!
              Murphy's Law - What can happen will happen at the least opportune moment

              Comment

              • #22
                SemiAutoSam
                Banned
                • Apr 2006
                • 9130

                Start here.

                And then this one.
                How aluminum contributes to everyday living and national defense: appliances, packaging, airplanes, etc. With great stop-motion animation and excellent imagery...


                I have made a few calibers on my lathe but some alloys work better than others. My favorite by far is experimenting with SLAP's.

                I don't have a Chronograph so my experimenting is mostly in the dark but its still interesting.

                Comment

                • #23
                  ar15barrels
                  I need a LIFE!!
                  • Jan 2006
                  • 57202

                  Originally posted by Rob P.
                  As you can see, AP ammo is illegal for HANDGUNS. Brass bullets are AP under the fed law. BATFE supposedly will also enforce all AP ammo bans in ALL calibers for which there is a corresponding handgun.
                  I'm not aware of any commercially produced 50BMG handguns, but there are probably some homebuilts out there somewhere.
                  Would the homebuilts automaticlly prohibit brass bullets of everyone with 50BMGs?
                  Randall Rausch

                  AR work: www.ar15barrels.com
                  Handguns: www.handgunbarrels.com
                  Bolt actions: www.700barrels.com
                  Foreign Semi Autos: www.akbarrels.com
                  Most work done while you wait on a scheduled shop visit.

                  Comment

                  Working...
                  UA-8071174-1