Just bought the Dillon XL650 anything I should know

[Solus]

how the title says I just maxed out my credit card on a dillon XL650 straight from the sight and bought a bunch of accessories. Any thing I should know about this press? Any accessories I should buy? Any other extras? heres the list of things I bought

XL650 press
pickup tubes 2 lrg and 2 sml
xl650 tool holder with wrench and allens
dillon roller handle aluminum
dillon rifle case gauges
dillon primer flip tray
dillon powder check
dillon low powder sensor

[AAShooter]

Load like the wind!! Enjoy!

[XDRoX]

The bullet tray is very handy. But then again so is a case feeder

[Solus]

I think in august I will buy those

[morrow]

Low powder sensor is kinda useless
Low primer sensor rules

Do the shell plate bearing mod right away.

[Solus]

Low powder sensor is kinda useless
Low primer sensor rules

Do the shell plate bearing mod right away.

please elaborate.... link?

[morrow]

Info and ordering info here:

http://www.brianenos.com/forums/index.php?showtopic=86570

[morrow]

Almost forgot, you will almost for sure need to adjust the indexing pawl so its super smooth, even with cases almost full of powder it won't cause spillage.

I used to have a link on how to do this but it's pretty easy. I'll try and find it.

EDIT: found it. Scroll down about half way and view the pic:

http://www.ar15.com/forums/t_6_42/329662_.html

See the black indexing block? You can move that side-to-side. You want the indexer to push the shell plate all the way forward however you still want to let the ball bearing determine the final resting place of each index. So basically adjust it as much as you can without pushing the index past the ball bearing.

I also cut like 1 coil off the spring below the ball bearing, way too much pressure on the shellplate and caused snapping no matter what.

[anyracoon]

Welcome to the Blue Kool-Aid Brother Hood! Roller Handle, Strong Mount, extra tool heads, and the list goes on. Also be sure to add Dillon & Brian Enos to your speed dial.

[Solus]

I see I will have to try that

[lpspinner]

Welcome to the Blue side!

[Solus]

My new signature\/\/

[Bill Steele]

Welcome to the Blue side!

+1

I am not a "loaded" kind of guy, but I love my Strong Mount, Bullet Tray, Empty Case Bin, etc. etc. Everytime I buy something from Dillon my expectations are exceeded.

[markw]

Case feeder and if you do rifle, the RT1200 case trimmer.

[s4alex]

Looks like you are reloading rifles, you might want to pick up a swager.


Sent from my iPad using Tapatalk HD