Unconfigured Ad Widget

Collapse

40 s&w reloading

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • smilee
    Member
    • Aug 2009
    • 103

    40 s&w reloading

    i know all the books usually say to compare 3 sources of reloading data. thats kind of difficult when you cant get all the pieces to line up. any suggestions? using

    (180 gr bear creek flat point). pretty sure they are molly coated even though they don't say

    Alliant unique powder

    wsp primers.

    but i cannot find any thing for those bullets any sugestions? another question is what is the tolerances when it comes to bullet weights. they are 180 gr but when i way them they are arround 182-183ish? any help would be appreciated. thank you in advance
  • #2
    lpspinner
    Senior Member
    • Oct 2005
    • 1164

    I use (did/now sometimes) the 180 Bear Creeks with Titegroup and Winchester SP primers. I started with the starting load for 180 FMJs and slowly worked my way up to where it's doing what I want it to do. Major PF.
    Some guys like their powder like their women, hot, cheap, dirty, that would be TiteGroup. -CocoBolo

    Comment

    • #3
      smilee
      Member
      • Aug 2009
      • 103

      reload

      in both the layman and the the sierra there are 180 JHP and not tmj or jfp but the 190 has jfp. so not sure what to do but maybe find the lowest starting point of the 190 that is not so that it might be inbetween the 180.

      Laymen says 180 gr jhp 4.9-5.6 and sierra says for same 4.6-6.3
      laymen for 190 jfp says 4.5-5.3 and sierra says for same 4.7-6.2

      so i was thinking at starting at 5.0 and working arround that what do you think? thank you.

      Comment

      • #4
        stretch64
        Member
        • Dec 2007
        • 173

        FYI...2001 Alliant data shows 5.5gr max with a Laser Cast 180gr at 1.125 OAL

        Comment

        • #5
          lpspinner
          Senior Member
          • Oct 2005
          • 1164

          Until you have a feel for how things react, I would ALWAYS begin at the published starting charge. in this case, the 180 is 4.6 from the Sierra. Make a batch of 10 at 4.6, then ladder up..10 each at...4.7, 4.8, 4.9, then 5.0

          After each one, inspect the brass for flatten primers, case cracks/splits, etc.....

          If all you're doing is plinking or target practice, there's no need to go max. more is NOT always better. Accuracy does not equate to more velocity.
          Some guys like their powder like their women, hot, cheap, dirty, that would be TiteGroup. -CocoBolo

          Comment

          • #6
            mjmagee67
            Veteran Member
            • Jun 2011
            • 2771

            5.0gr of Unique under a 180gr pill is a very good load out of my gun. But I hate the way Unique meters out of my powder thrower. I have moved on to Power Pistol at 6.0gr low power practice round and 6.6gr for a full power round!
            If you want change you have to put in your 2 cents, you can't just sit on the sidelines and whine.

            Comment

            • #7
              smilee
              Member
              • Aug 2009
              • 103

              [QUOTE=lpspinner;8604618]Until you have a feel for how things react, I would ALWAYS begin at the published starting charge. in this case, the 180 is 4.6 from the Sierra. Make a batch of 10 at 4.6, then ladder up..10 each at...4.7, 4.8, 4.9, then 5.0

              After each one, inspect the brass for flatten primers, case cracks/splits, etc.....

              If all you're doing is plinking or target practice, there's no need to go max. more is NOT always better. Accuracy does not equate to more velocity.[/QUO



              the only thing with the 4.6 is that is for Jhp does that matter?

              Comment

              • #8
                CalTeacher
                Senior Member
                • Oct 2010
                • 828

                5.3-5.4 gr. Of unique shoots great with the 175gr. Boolits I cast ( though they actually weigh in at 180). No signs of pressure and plenty accurate out of my g23 with a stock barrel.

                Comment

                • #9
                  M27
                  Senior Member
                  • Apr 2011
                  • 871

                  I dont load .40 but I do use bear creek for 45,and 380auto. they load great with hodgdon tightgroup

                  as for data when I use bear creek I use normal lead data from what I could find (and I didn't look very hard) 4.7grains should be a good safe starting load
                  I will share my opinion and my load data, BUT I am just a guy with too many cigars and too many guns. Whatever I say is probably wrong.

                  Comment

                  • #10
                    Fishslayer
                    In Memoriam
                    • Jan 2010
                    • 13035

                    Firstly, lead bullet data is going to differ from jacketed bullet data. Generally lead will require less powder for a given bullet type/weight. I load Bear Creeks and use regular cast lead bullet data.

                    What you are looking for is how much bullet is in the case for a given OAL. If you can find a similar load with a known bullet you can determine how much case volume is taken up by the bullet.

                    Be careful. The 10mm Kurz is a high pressure round that has been known to bite. You should be OK with Unique though as long as you don't do anything crazy.
                    Last edited by Fishslayer; 05-18-2012, 11:35 PM.
                    "He is your friend, your partner, your defender, your dog.
                    You are his life, his love, his leader. He will be yours, faithful and true, to the last beat of his heart.
                    You owe it to him to be worthy of such devotion."


                    Originally Posted by JackRydden224
                    I hope Ruger pays the extortion fees for the SR1911. I mean the gun is just as good if not better than a Les Baer.
                    Originally posted by redcliff
                    A Colt collector shooting Rugers is like Hugh Grant cheating on Elizabeth Hurley with a hooker.

                    Comment

                    • #11
                      lpspinner
                      Senior Member
                      • Oct 2005
                      • 1164

                      No it doesn't matter, because you are taking a bullet that weights the same and working up a load from the starting minimum.

                      Here's also the confusion....I don't consider Moly bullets the same as lead. The moly coating allows you to start with jacketed minimums.

                      I load my Bear Creek Molys the same as I load my Zeros. I make major with them and it works. And yes I am using a fast powder....Titegroup.
                      Some guys like their powder like their women, hot, cheap, dirty, that would be TiteGroup. -CocoBolo

                      Comment

                      • #12
                        Fishslayer
                        In Memoriam
                        • Jan 2010
                        • 13035

                        Originally posted by lpspinner
                        No it doesn't matter, because you are taking a bullet that weights the same and working up a load from the starting minimum.

                        Here's also the confusion....I don't consider Moly bullets the same as lead. The moly coating allows you to start with jacketed minimums.

                        I load my Bear Creek Molys the same as I load my Zeros. I make major with them and it works. And yes I am using a fast powder....Titegroup.
                        OAL is going to be a factor as well. Unless OP can find a recipe with a similar bullet he'll be kind of feeling around. While it's unlikely he'd get into any serious trouble with moderate loads of Unique it pays to be careful.
                        "He is your friend, your partner, your defender, your dog.
                        You are his life, his love, his leader. He will be yours, faithful and true, to the last beat of his heart.
                        You owe it to him to be worthy of such devotion."


                        Originally Posted by JackRydden224
                        I hope Ruger pays the extortion fees for the SR1911. I mean the gun is just as good if not better than a Les Baer.
                        Originally posted by redcliff
                        A Colt collector shooting Rugers is like Hugh Grant cheating on Elizabeth Hurley with a hooker.

                        Comment

                        • #13
                          lpspinner
                          Senior Member
                          • Oct 2005
                          • 1164

                          Originally posted by Fishslayer
                          OAL is going to be a factor as well. Unless OP can find a recipe with a similar bullet he'll be kind of feeling around. While it's unlikely he'd get into any serious trouble with moderate loads of Unique it pays to be careful.

                          Correct, but since we're playing with starting loads and a taller OAL bullet, which the JHP should be compared to the Bear Creek 180gr TC. We shouldn't have to worry about too much pressure.


                          BTW OP....what gun are you going to be shooting this from?
                          Some guys like their powder like their women, hot, cheap, dirty, that would be TiteGroup. -CocoBolo

                          Comment

                          • #14
                            smilee
                            Member
                            • Aug 2009
                            • 103

                            First gun I plan on building for is my sig 224 and after that my g23. I thank all if you for the help. It sounds like my other question was answered by the fact that the bullet weight listed does have a little variance. Once again thank you all again. It sounds like titegroup is a popular powder for 40?

                            Comment

                            • #15
                              lpspinner
                              Senior Member
                              • Oct 2005
                              • 1164

                              I along with a lot of others think so.
                              Some guys like their powder like their women, hot, cheap, dirty, that would be TiteGroup. -CocoBolo

                              Comment

                              Working...
                              UA-8071174-1