had to pull apart 150 9mm reloads

[macman9]

Can i save the bullets and load them agian. I also have about 20 or so that had been crimped pretty hard from when i was setting up my press. R they ok to reload?

[Revoman]

What kind of bullets are they? Lead, jacketed, plated? It makes a big difference.

[Bill Steele]

Can i save the bullets and load them agian. I also have about 20 or so that had been crimped pretty hard from when i was setting up my press. R they ok to reload?

It depends on your expectations, but for blasting ammo, load away.

If you are loading plated (soft, relatively thin plated like Berry's) you might chuck the ones that have deep crimp lines, but otherwise, again load away.

To give you an idea what the kind of damage you have does to accuracy, load some exact same loads with new bullets and compare. You will then know how much they affect your accuracy.

[macman9]

They are 115 grain xtreeme plated bullets. Just going to punch paper.

[Bill Steele]

They are 115 grain xtreeme plated bullets. Just going to punch paper.

I would reload them, just don't expect perfect accuracy, you might be pleasantly surprised.

[damndave]

I would just load them too. If you get a flyer in that grouping, just blame the scratched bullet

[johnny1290]

I would just load them too. If you get a flyer in that grouping, just blame the scratched bullet

bwahaha! excellent!

I shoot berrys that I had to pull, they seemed to work fine to me.