xtreme bullet load data?

[hayaku]

can't seem to find any on their website and i'll have to wait till monday to give them a call...

i'm looking for:

.45acp 230gr rn with win231
.38super 115gr rn with win231
9mm 115gr rn with win231

anyone got any load recipes for this on hand? i'm just looking for plinking mass produced safe working loads. nothing crazy...

[dbbspider]

I use 5.3 grains of W231 for 230 grn round nose and it works fine in all my 1911s

[hayaku]

awesome. thx.

[Clownpuncher]

4.5 of 231 in the 115 RN's. 1.115 COAL. Has a nice snappy feel but not hot and not alot of flash and the cases come out clean.

[stand125]

I use 4.5gr with Magnum primers for my 9mm plinking load.

[hayaku]

cool.. 4.5 for 9mm and 5.3 for 45acp. that'll keep me busy tomorrow. thanks guys.

[stand125]

When I used standard primers I used 4.7gr of W231 but I got a great buy on Magnum primers and just never switched back to standard primers.

[skibuff]

They won't give out load data if you call but general rule for plated bullets in low to medium FMJ data. Just stay below 1200fps.

[lpspinner]

They told me to follow the Speer Reloading manual.

[zfields]

5.0 - 5.4 win 231 for 45acp for me

I normally load the 200 grain Berrys hollow point at 5.4 these days.

[Turbo311]

115 gn Berry's 4.7 win 231, win spp
230 gn Berry's 4.7 win 231, win lpp
Both shoot great for me out of all my guns