Unconfigured Ad Widget

Collapse

Sizing die wont budge

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dark Mod
    Veteran Member
    • Feb 2011
    • 4284

    Sizing die wont budge

    I have a RCBS Sizing/decapping die that just wont move, the decapping pin isnt set low enough and i cant screw it in or out for the life of me. Coated it with WD-40 and let it sit for a few hours, then used wrenches to twist on it and still nothing.

    Any tips or tricks?
  • #2
    sargenv
    Veteran Member
    • Oct 2005
    • 4620

    If you can't get it to budge, you may wish to contact RCBS and/or send it to them.. they are good about fixing or replacing it if it is not fixable.

    Comment

    • #3
      edlacy
      CGN/CGSSA Contributor
      CGN Contributor
      • Apr 2008
      • 239

      +1 They're really good about taking care of things like that.
      3 John 4

      Comment

      • #4
        sargenv
        Veteran Member
        • Oct 2005
        • 4620

        I messed up the ram on an older Rock Chucker in my early swaging days (about 2 years ago). I called them up and gave them the serial # and when I bought the press, and they made me a new ram for the R/C no charge.. I also placed an order for the swaging ram.. which did cost me.. but was well worth it..

        Comment

        • #5
          lpspinner
          Senior Member
          • Oct 2005
          • 1164

          +2 on calling RCBS.

          Did you use a set of Vise Grips to get a good bite on the die body?

          @sargenv.....I had a bent swaging rod for the .223 and RCBS just sent me a new one for free.
          Last edited by lpspinner; 03-23-2012, 4:06 PM.
          Some guys like their powder like their women, hot, cheap, dirty, that would be TiteGroup. -CocoBolo

          Comment

          • #6
            Dark Mod
            Veteran Member
            • Feb 2011
            • 4284

            Originally posted by lpspinner
            +2 on calling RCBS.

            Did you use a set of Vise Grips to get a good bite on the die body?

            @sargenv.....I had a bent swaging rod for the .223 and RCBS just sent me a new one for free.
            Didnt use vice grips, the wrenches i was using werent slipping though. i think ill call RCBS, was just hoping for an easy fix. I paid $15 for the die set and between wait time and shipping etc. id almost rather buy a new set

            Comment

            • #7
              FLIGHT762
              Veteran Member
              • Mar 2009
              • 3072

              Put it in the freezer for a few hours and then try it.

              Comment

              • #8
                Revoman
                Senior Member
                • Dec 2007
                • 2394

                Also try smacking the wrench with a hammer while holding it securely, kinda like an improvised impact hammer....righty tighty...lefty lucy by the way.

                Comment

                • #9
                  Butthead
                  Senior Member
                  • Aug 2007
                  • 508

                  A couple of drops of liquid plumber and let it sit for 10-15 minutes. Got me out of a few jams wrenching on cars back in the day.
                  Never return fire!


                  2e 32 32 20 2e 33 38 30 20 2e 33 38 20 39 6d 6d 20 2e 34 34 20 2e 35 30 41 45 20 2e 32 32 33 20 35 2e 35 36 20 33 30 2d 33 30 20 2e 33 30 38 20 2e 35 30 44 54 43 20 32 32 2d 32 35 30 20 33 37 4d 4d 20 2e 34 35 41 43 50

                  Comment

                  • #10
                    welldriller
                    Member
                    • Jan 2012
                    • 138

                    Mark,

                    Last resort--Heat the outside with a torch to expand it. If that doesn't work, heat it again and dip the screw in water to shrink it, You shouldn't don't have to get it too hot to break the joint. I had to do that with some drill pipe last week.
                    If that don't do it throw it away.
                    Good Luck

                    Comment

                    • #11
                      24Sailor
                      Senior Member
                      • May 2011
                      • 937

                      Originally posted by welldriller
                      Mark,

                      Last resort--Heat the outside with a torch to expand it. If that doesn't work, heat it again and dip the screw in water to shrink it, You shouldn't don't have to get it too hot to break the joint. I had to do that with some drill pipe last week.
                      If that don't do it throw it away.
                      Good Luck
                      ^^+1 And be sure to remove all flammables and explosives from work area before you attempt this.

                      Comment

                      • #12
                        noylj
                        Senior Member
                        • Oct 2010
                        • 713

                        Those collets for the decapping pin must be on TIGHT.
                        Never had any problem that a vise and a couple of wrenches didn't solve.

                        Comment

                        Working...
                        UA-8071174-1