Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
Case Cleaning
Collapse
X
-
Actually I only started collecting Milsurps 3 years ago. I think I might own about 24...They're cheaper than guns that will most likely never get the opportunity to kill somebody...
I belong to the group that uses firearms, and knows which bathroom to use.
Tis better to have Trolled & lost, Than to never have Trolled, at all.
Secret Club Member?. -
I had never heard of this, but your posts made me look into it. The results are impressive.Getting setup for SS tumbling runs about $230, but you never have to change the media.
Drying is pretty easy. I have a homemade dryer, but it isn't necessary. Some people lay them out in the sun, some even put it in the oven. A quick dunk in alcohol will dry them in seconds. I even put some on a towel in front of one of those foot heaters and had them dry in 10-15 minutes.
bluenoiseise.
lllllllllllllllllllllll...
"Socialism, in general, has a record of failure so blatant that only an intellectual could ignore or evade it." -Thomas SowellComment
-
-
Adam, I have started a 12 step support group for those of us with this "disease."
I'm not only a member, I am the president.Reloaders: Stay safe, even the things you don't see may bite you. Read more here: http://www.calguns.net/calgunforum/s...d.php?t=495909Comment
-
I use a bit of liquid Dawn, some Jet Dry dishwasher drying agent, and a bit of Simple Green. I rinse them, then tumble the cases a bit in a towel and let them dry under an electric light. Better than new.Comment
-
My recipe for case cleaning is, de-cap then use my ultrasonic cleaner I got from harbor freight with the following solution, 1 table spoon dish soap, 2 cups or so white vinegar, 1.5cup water clean for 3 480sec cycles then clean in a water baking soda solution about a tablespoon of baking soda in a quart of water. Then I dry the brass usually over night. Then tumble with lizard litter and some new finish for an hour or so and you get new looking brass.
^^grammar I know....Comment
-
you do a wet cleaning and then a dry tumble after? 2 cleanings before load ready?My recipe for case cleaning is, de-cap then use my ultrasonic cleaner I got from harbor freight with the following solution, 1 table spoon dish soap, 2 cups or so white vinegar, 1.5cup water clean for 3 480sec cycles then clean in a water baking soda solution about a tablespoon of baking soda in a quart of water. Then I dry the brass usually over night. Then tumble with lizard litter and some new finish for an hour or so and you get new looking brass.
^^grammar I know....Comment
-
Yeah. There is relatively no carbon in the inside of the case and nothing in the primer pocket to worry about! I also don't need to brush my case necks on bottle neck cartridges. It seems like a lot of work but compared to hearing some guys tumbling for 4hrs it's not I put about 2hrs max not including dry time. I will take a pic of some before, in process and after stuff as I just went to the range.Comment
-
If anyone is interested, I did a step by step writeup on SS media tumbling back in May with my method.
Comment
Calguns.net Statistics
Collapse
Topics: 1,870,936
Posts: 25,177,651
Members: 358,862
Active Members: 5,392
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 48088 users online. 69 members and 48019 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.




Comment