non live rnds wtb

[FIREBALL_BRIAN]

Title may be confusing and my apologies if posted in wrong location. I'm looking to see if anyone in fresno clovis area will reload 223, 380, 9, 40, 45 without powder or primer. I want to purchase 5rnds of each and can supply brass if needed. Thanks please pm and also post pm sent or if there is any advice as to direction I'm all ears

[hayaku]

are you using this for training/dry fire? there are plastic rounds, some fancier than others with springs inside to absorb the firing pin strike, colored plastic to mark clear distinction its dummy/practice rounds...

most diy "dummy" rounds i've seen still had a spent primer inside. however, you may want to paint/color it different so you know its different from other rounds, especially if there was a squib or something...

[NRAhighpowershooter]

Instead of a dead primer.. I use a dab of silicone in the primer pocket.. gives the firing pin something semi-hard to hit and is easily distinguished as a dummy round.

[FIREBALL_BRIAN]

No my girl wants them to make key chains and necklaces ha.

[FIREBALL_BRIAN]

I will fill the end with a eyelet screw which will be epoxied in

[joelogic]

I used an eyelet screw from HD and made a necklace with a .45 round. Montana Gold bullets look cool.

[FIREBALL_BRIAN]

That's the thought

[FIREBALL_BRIAN]

So any reloaders have any to sell?

[grant22]

Are you the same fireball brian that's over at rzrforums.net? If so, PM me.

[FIREBALL_BRIAN]

Yes sir

[FIREBALL_BRIAN]

So I'm in need of 5 fmj 9mm or 380. Sounds like grant22 has made a more than generous offer to help me out. Pm if you have any to sell. Thanks all

[grant22]

Just for absolute clarity, Fireball Brian needs 5 FMJ bullets of .380 and 5 of 9mm (I only have lead, and for his purposes, lead won't work).

If anyone can help him with this, and maybe even mail those directly to me, I could assemble them (I have the brass).

Please help Brian out, he's a good dude.

[zfields]

PM me, I can set you up with the 9mm, I might have a couple peices of 380 sitting around.

I think all the bullets I have are plated hollow points though, ill have to look around.

[FIREBALL_BRIAN]

Thanks grant22 much appreciated.

ZFields pm sent

[Sub95]

I have live 380s i can pull apart and put back with out primer or powder? let me know.