Unconfigured Ad Widget

Collapse

Getting close....RELOADING.... Need more info

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • metalhead357
    Calguns Addict
    • Jan 2006
    • 5546

    Getting close....RELOADING.... Need more info

    Well, this thread is about 20 years in the making, or 20 years long overdue.

    I've been collecting parts, pieces etc. for reloading for forever and a day; just never got the umption to go through with it until now. Just gotta get this done before I have a lapse back into "it can wait"...I'm eager to just get whats left.

    Does anyone have a complete list of *everything* one needs in order to start to reload? Count me as inexperienced but not clueless- I've HELP re-load but not sure I've got all my parts necessary. So a complete list of every item sitting on your table would be helpfull.

    I've certainly got the basics,
    A Lee press, single stage (will go progressive soon enough)
    several dies for a couple calibers- some two piece, some three,
    a scale (old timer...thinking going digital).
    A roll tray for lubricating the rounds

    I definitely want/need a tumbler.

    I'll post some pics of what I do have and maybe somebody can point to what I DONT got

    So hit me with what you got sitting on your table when YOU sit down to re-load.

    Any & all help is greatly appreciated

    I'm just itching to start this!!!!!
    I will not be pushed, filed, stamped, indexed, briefed, debriefed or numbered....
    I am not a number! I am a free man

    1.)All humanity would be better off if Stoooopid hurt.
    2.)Why is it that if guns are sooooo unsafe that you're 9 times more likely to die at the hands of your doctor?
    3.)Remember...Buy it cheap & stack it deep
  • #2
    napahunter
    Senior Member
    • Sep 2007
    • 550

    Hey J just come over when you have the time and i'll straighten you out. I just got 300 new rounds i need to find a load for. B. I keep running back and forth from here to cooking dinner.I'll talkl at ya later

    Comment

    • #3
      metalhead357
      Calguns Addict
      • Jan 2006
      • 5546

      Awsome. Will do.... I guess that now TWO (with the other thread on Knox...) reasons more why we need to hang again!!!
      I will not be pushed, filed, stamped, indexed, briefed, debriefed or numbered....
      I am not a number! I am a free man

      1.)All humanity would be better off if Stoooopid hurt.
      2.)Why is it that if guns are sooooo unsafe that you're 9 times more likely to die at the hands of your doctor?
      3.)Remember...Buy it cheap & stack it deep

      Comment

      • #4
        Fjold
        I need a LIFE!!
        • Oct 2005
        • 23093

        Off the top of my head:

        Nothing is more important than a good reloading manual. All the good ones have a great explanations of the loading process and the safety precautions. It's really better to have a couple of manuals to compare against.

        The first thing I would say is to get a private place to reload away from distractions. Get good lighting so you can inspect all the cases and see every step of the operation.

        I like to use spray lubes (Hornady one shot, etc) I feel that it gives a more even coating without excess lube on the cases.

        I like to clean my cases with a tumbler/vibrator first, that way it gets all the range grit off the cases.

        I like a hand priming tool, (I use the Lee unit).

        I use a powder measure. It's a lot quicker than weighing individual loads and works fine for ball, flake and short stick powders.

        Plastic loading trays to hold the cases.

        Powder trickler helps a lot when weighing charges.

        A small tray to hold bullets

        A small pick is nice to have to clean the occasional piece of grit out of flash holes

        A micrometer or case length gage to check cases and loaded round over all lengths.
        Last edited by Fjold; 11-01-2007, 10:12 PM.
        Frank

        One rifle, one planet, Holland's 375




        Life Member NRA, CRPA and SAF

        Comment

        • #5
          metalhead357
          Calguns Addict
          • Jan 2006
          • 5546

          Ok, right off the bat I see I forgot a micrometer....and I do believe, if memory serves i do have a case trimmer and hand primer that I forgot to mention. Speak on with what editions to buy and which to avoid

          I think I have the correct plastic trays...that'll be a pic (in waiting) for sure.

          WHICH spray lubes?

          and THANK YOU!
          I will not be pushed, filed, stamped, indexed, briefed, debriefed or numbered....
          I am not a number! I am a free man

          1.)All humanity would be better off if Stoooopid hurt.
          2.)Why is it that if guns are sooooo unsafe that you're 9 times more likely to die at the hands of your doctor?
          3.)Remember...Buy it cheap & stack it deep

          Comment

          • #6
            mike100
            Veteran Member
            • Jul 2006
            • 2507

            seems like a caliper would be accurate enough. Doesn't everybody have one of those?

            Comment

            • #7
              metalhead357
              Calguns Addict
              • Jan 2006
              • 5546

              Originally posted by mike100
              seems like a caliper would be accurate enough. Doesn't everybody have one of those?

              might be, I DO have one of those...just all my mics are more auto related...I suppose I could use 'em for the pistol calibers...but I dont think I have one large enough to do 30-30, .308, 30-06 and the like.....
              I will not be pushed, filed, stamped, indexed, briefed, debriefed or numbered....
              I am not a number! I am a free man

              1.)All humanity would be better off if Stoooopid hurt.
              2.)Why is it that if guns are sooooo unsafe that you're 9 times more likely to die at the hands of your doctor?
              3.)Remember...Buy it cheap & stack it deep

              Comment

              • #8
                kurac
                Veteran Member
                • Dec 2005
                • 2917

                You will never have everything you need or want. I would start simple (with one caliber) and then expand from there.
                www.culinagrips.com
                "custom grips for shooters by shooters"

                Comment

                • #9
                  xrMike
                  Calguns Addict
                  • Feb 2006
                  • 7841

                  Originally posted by kurac
                  You will never have everything you need or want.
                  So true! There's always that "one more thing" that will make your reloading experience complete and bring you peace and contentment...

                  Comment

                  • #10
                    StraightShooter
                    Senior Member
                    • Jun 2007
                    • 2189

                    Originally posted by kurac
                    You will never have everything you need or want. I would start simple (with one caliber) and then expand from there.
                    Seriously, I get just as excited when buying new cool stuff for reloading as I do buying a new firearm. I have a rcbs chargemaster system coming later this afternoow and I cant wait till it gets here. I have checked the internet tracking number like 20 times today! Sad... i know.... but love getting new stuff.

                    Brandon M.

                    Comment

                    • #11
                      metalhead357
                      Calguns Addict
                      • Jan 2006
                      • 5546

                      LOL

                      No matter how hard I try...I still see lotttttts of Midway & Brownells orders in my near future!!!!!!!
                      I will not be pushed, filed, stamped, indexed, briefed, debriefed or numbered....
                      I am not a number! I am a free man

                      1.)All humanity would be better off if Stoooopid hurt.
                      2.)Why is it that if guns are sooooo unsafe that you're 9 times more likely to die at the hands of your doctor?
                      3.)Remember...Buy it cheap & stack it deep

                      Comment

                      • #12
                        metalhead357
                        Calguns Addict
                        • Jan 2006
                        • 5546

                        Ok...this is a long overdue update; finnaly dug around in various boxes to find what I truly have.
                        • 1 Lee Single stage press
                        • 3 hand primers +another with a broken wedge/lever thingy (2 lee, 2 rcbs)
                        • 1 beam scale- Lee
                        • 1 digital scale (frankford arsenal)
                        • 1 rcbs bullet lube pad
                        • 1 Lee powder meter
                        • 1 plastic Rcbs micrometer
                        • 1 Lee reloading manual
                        • several bullet trays made of wood
                        • A quantum number of seat sizes (like 20+)
                        • 3 lee case gauges
                        • 1 die set for .44 mag/.44 special used
                        • 1 die set for .7.62x39 new
                        • 1 die set for 300 Win Mag New
                        • 1 die set for .30 carbine used
                        • 1 die set for .45 ACP used
                        • 1 die set for 8x56R
                        • 1 bulet mold for 8x56R


                        I'm assuming I need-->
                        • One tumbler and/or Ultrasonic cleaner
                        • Tumbler media
                        • 1 case trimmer
                        • *POWDER*
                        • powder trickler
                        • case lube...Or Spray???????

                        Plans to get:
                        • 30-06 die
                        • 30-30 dies
                        • .357 dies
                        • 9mm dies
                        • 30-30, .357, .44 bullet molds

                        What else am I forgetting????????????????????

                        I *plan* on being able to cast lead bullets for some of these; I do have a lead pot and one bullet mold already but would love a real-persons explanation of the process-- especially right after the leads been fluxed and poured into the molds.....

                        And somebody PLEASE 'splain to me what would be the best all around pistol powder and another all around rifle powder. I'd really like to minimize the powders--- or be able to use one in more than one caliber if possible.
                        I will not be pushed, filed, stamped, indexed, briefed, debriefed or numbered....
                        I am not a number! I am a free man

                        1.)All humanity would be better off if Stoooopid hurt.
                        2.)Why is it that if guns are sooooo unsafe that you're 9 times more likely to die at the hands of your doctor?
                        3.)Remember...Buy it cheap & stack it deep

                        Comment

                        • #13
                          Fjold
                          I need a LIFE!!
                          • Oct 2005
                          • 23093

                          I use Hornady -One Shot spray lube

                          There are no one size fits all powders that will let you get maximum performance out of all your cartridges. Powders are selected with case size, bullet weight and barrel length in mind and both the pistols and rifle cartridges that you have will vary a great deal in these areas.

                          The 9mm and 45 ACP take fast powders like Bullseye/W231, etc. while the 44 Mag needs a medium burn powder like W296 or H110.

                          Just about all pistols will work with Blue Dot, Unique, etc powders but none will perform to their potential with it.

                          In your rifles you're going from 30 carbine to 300 win mag. The 7.62x39, 30/30 and even the 30.06 will use powders like 4895 (H and IMR) but the 300 needs slower burning powders starting in the 4350 range up through 7828 for the big bullets.

                          Look at your reloading manual for each cartridge that you want to load and look at what powders they recommend for the best performance in each one with the bullet weights that you want to use.

                          The 45 ACP and 9mm will have a lot of powders that overlap. The 357 mag and 44 Mag will also have a lot also. The 30 carbine will also probably overlap a lot with some of the slower pistol powders.

                          The 30/30 and the 7.62x39 will also have a lot of common powders and the heavier 30.06 loads and the 300 mag loads will also agree on some.
                          Last edited by Fjold; 12-15-2007, 5:25 PM.
                          Frank

                          One rifle, one planet, Holland's 375




                          Life Member NRA, CRPA and SAF

                          Comment

                          • #14
                            metalhead357
                            Calguns Addict
                            • Jan 2006
                            • 5546

                            thank you for that- I was hoping there would be some kind of overlap. I see some reading in my future away from all you guys here.....
                            I will not be pushed, filed, stamped, indexed, briefed, debriefed or numbered....
                            I am not a number! I am a free man

                            1.)All humanity would be better off if Stoooopid hurt.
                            2.)Why is it that if guns are sooooo unsafe that you're 9 times more likely to die at the hands of your doctor?
                            3.)Remember...Buy it cheap & stack it deep

                            Comment

                            • #15
                              NRAhighpowershooter
                              Super Moderator
                              CGN Contributor - Lifetime
                              • Jun 2003
                              • 6485

                              Metalhead357.... let me know when you have your equipment and I'll GLADLY come over and help you set up everything... one condition though... wifey HAS to be home when I come over.....
                              'Just Don't Point, Squint, and Laugh! '

                              Distinguished Rifleman Badge #2220

                              Comment

                              Working...
                              UA-8071174-1