Unconfigured Ad Widget

Collapse

Progressive versus single stage

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mike_the_wino
    Veteran Member
    • Aug 2010
    • 2871

    Progressive versus single stage

    In my 'noob equipment advice' thread the topic of single stage versus progressive came up. Someone mentioned that progressive is better for pistol and single stage is better for rifle.

    Presently I shoot .223, 5.56, .308 (FAL), 30-30, 9mm and 44mag. Which setup would make the most sense? I would rather spend money on reloading supplies rather than buying one of each.

    Thanks,
    Mike
  • #2
    joelogic
    Calguns Addict
    • May 2008
    • 6597

    If I had to load anything on a single single I would rather buy factory. I load 1moa .308 for my bolt gun and it would probably shoot better if I could shoot better.
    Micro/Mini Reflex Red Dot Sight Mount for the M1, M1a/M14 platform

    Comment

    • #3
      Dark Mod
      Veteran Member
      • Feb 2011
      • 4284

      Get a single stage and dont bother reloading 9mm at all. I load 30-30, 5.56, 7.62x544, and .357 magnum all on a single stage. Cost for components for 9mm will be about $140 per 1000, you can buy reloads for $165 per 1000 and dont have to spend 4 hours on it either.

      Comment

      • #4
        Clownpuncher
        Senior Member
        • Aug 2011
        • 1176

        I shoot about the same.. (3 pistol, 3 rifle) I went single stage. I know the progressive would allow me to make tons more pistol ammo quicker but I like being able to be extremely precise with my rifle ammo. I just make plinking ammo for my pistols anyway.
        Another option you could look at that would possibly be a happy medium is a Turret press. It didn't really interest me but you can have a turret index and it is similar to a progressive. Not as fast but faster than a single stage. You can turn the index off and use it as a single stage.
        My concern was the way the piston is set up on a turret, I like the single stage and having the piston directly below the shell plate.

        Another reason for single stage was, like you, I wanted to spend my money on supplies and more guns rather than a press. A single stage kit was $100, a progressive is $400.
        Support CalGuns by purchasing stuff through this Amazon link: http://www.shop42a.com

        sigpic

        Comment

        • #5
          XDRoX
          Veteran Member
          • Mar 2009
          • 4420

          Single stage is better for precision. If it's bench bench rest ammo you require, a single stage will do it.

          It really just comes down to how much you shoot. A single stage will load 50 rounds an hour, and a progressive will load 500 - 800 rounds an hour. If you shoot 2000 rounds a month, a single stage just doesn't make sense time wise. If you shoot 200 rounds a month, then it's just fine.

          Most guys that have been reloading for a long time, both rifle and pistol, have both types of presses on their bench. So IME a single stage is never a waste of money. Currently I have two single stages, a turret, and a progressive. I'm about to get another progressive to add to the mix.

          Also, IMO it's not worth my time to load 223 for plinking. You can buy 223 for 25cents a round and I was loading it at 22cents a round and it was taking forever to prep the brass.
          Chris
          <----Rimfire Addict


          Originally posted by Oceanbob
          Get a DILLON...

          Comment

          • #6
            popeye4
            Senior Member
            • Nov 2008
            • 1534

            Single stage does everything, though it will be a bit slow on the bulk pistol stuff. More versatility with single stage as well, and even with a progressive, you'll find having a single stage will come in handy. I'd hate to try to work up a load if I only had a progressive machine (I have a Rock Chucker and Dillon XL650, if I could only have one it would be the Rock Chucker).
            sigpic
            NRA Life Member
            CRPA Life Member

            Comment

            • #7
              choprzrul
              Calguns Addict
              • Oct 2009
              • 6551

              After using single stages and a turrent for over 25 years, I got a Hornady Lock n Load progressive. Not going to sell the old stuff, but once you go progressive, you won't go back!

              .

              Comment

              • #8
                damndave
                I need a LIFE!!
                • Oct 2008
                • 10858

                For the calibers you plan to load, I would go with a single stage. I load with both a single stage and progressive and will never get rid of either. I FL size all of my rifle cases on the single stage and it is much easier than doing it on a progressive. Just feels more sturdy.

                Majority of the time with bottleneck cases is done off the press anyways.

                Comment

                • #9
                  LexLuther
                  Senior Member
                  • Dec 2008
                  • 838

                  Dont believer this got to have a single to load precision. There was a story just recently about a guy who won a major sniper competition using ammo loaded on a Dillon progressive.
                  "I love it, its my second ammendment but we with the gun was the only thing between those guys and the oven and they still can't know this theys too dumb and I seen the ovens. They dont know it but they cant take all the guns and if ever, push ever comes to shove we'll be back." - Don Burgett

                  Comment

                  • #10
                    popeye4
                    Senior Member
                    • Nov 2008
                    • 1534

                    Keep in mind that unless you have multiple toolheads set up (at least for the Dillon), you'll have to do a lot of work to change calibers. And fully dressed toolheads ain't cheap.
                    sigpic
                    NRA Life Member
                    CRPA Life Member

                    Comment

                    • #11
                      BigBronco also not a Cabinetguy
                      Calguns Addict
                      • Jul 2009
                      • 7084

                      I have both and highly recommend it. If loading a small batch of pistol, lets say just a 50 - 100 I would use the single stage. For rifle case prep I use the single and depending on whether I throw powder with a measure (Progressive) or hand weigh each charge of powder then (single stage).
                      "Life is a long song" Jethro Tull

                      Comment

                      • #12
                        uscbigdawg
                        Senior Member
                        • Nov 2007
                        • 1869

                        The idea that a progressive can't load precision ammo is a flat out lie.

                        David Tubb - Arguably the greatest rifle shooter ever. Loads on a Dillon RL550 and XL650.
                        Bennie Cooley/Mike Voigt - Two of the best 3-gun AND sniper match shooters, load on Dillons.
                        US Palma Team - Loads on Dillon XL650's.

                        Now, while in the case of Tubb, Cooley and Voigt, they load with a Prometheus powder dispenser attached, the machine is still doing a bulk of the work.

                        Rich
                        "Speed is a tactic!" - R.W.

                        "Pressure is what you feel when you don't know what you're doing." - Chuck Knox

                        "The callus on my finger is from my trigger, not the keyboard!" - Rob Leatham

                        Comment

                        • #13
                          Paper Boy
                          Calguns Addict
                          • Dec 2009
                          • 5666

                          I load single stage 6.5 Grendel, .223, 45 ACP and starting on 9x25 Dillon. But I also don't load thousands of rounds at a time, and the whole set up was free.

                          A typical weekend is a few hundred spread over a few hours. My rifle rounds all group extremely tight and so do the pistol.

                          My buddy uses a progressive press and his reloads are just as good. I think it is more about prep, load development and attention to detail than if your using single or progressive.

                          What it comes down to is how much are you going to load and how much do you want to spend (IMHO).

                          Some day I will buy a progressive press just to do pistol loads faster but I will keep the single stage on my bench because I really enjoy loading with it.
                          Youtube reviews https://bit.ly/2V3WchY
                          https://hooksandammo.com

                          Comment

                          • #14
                            CSACANNONEER
                            CGN/CGSSA Contributor - Lifetime
                            CGN Contributor - Lifetime
                            • Dec 2006
                            • 44094

                            Both is really the way to go. For bottlenecked rounds, I do most of my work on SS presses. For precision reloading, I use SS presses. For bulk reloading, I use a Dillon 550. I just traded my 650 away but, I'll never trade my 550 or any of my SS presses.
                            NRA Certified Pistol, Rifle, Shotgun and Metallic Cartridge Reloading Instructor
                            California DOJ Certified Fingerprint Roller
                            Ventura County approved CCW Instructor
                            Utah CCW Instructor


                            Offering low cost multi state CCW, private basic shooting and reloading classes for calgunners.

                            sigpic
                            CCW SAFE MEMBERSHIPS HERE

                            KM6WLV

                            Comment

                            • #15
                              sonnyt650
                              Senior Member
                              • Dec 2009
                              • 586

                              Originally posted by uscbigdawg
                              The idea that a progressive can't load precision ammo is a flat out lie.
                              Not really, it's just understood we're talking about the needs of shooters outside the top tiers of competition. The additional cost of a decked out 650-based precision reloading assembly line isn't worth it for those of us that shoot a mere 100-200 rounds every other week. The whole truth is that precision is the domain of a single-stage press unless you're willing to spend lots more money.

                              Comment

                              Working...
                              UA-8071174-1