Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
New reloader guy looking for HELP!!
Collapse
X
-
Neck sizing does nothing to the case body, it only works the neck back down to a smaller diameter. Full length sizing turns the entire case back into the SAAMI spec for the cartridge.
Neck sizing should only be used in bolt action rifles that you have no plans to use anywhere but the range. Cases CANNOT be interchanged between rifles as they are formed to that rifles particular chamber. It is a little more accurate, but has big problems in the reliability department due to temperature changes that may cause the brass to change shape.
Full length sizing is a must for semi-auto rifles. It is also a good idea if you plan on using the cartridge in a wider variety of temperatures. Because it sizes the full case, it is much more reliable ammo and is the only way to go if you are making rounds to hunt with.For Sale: Off Roster Handgun Moving Sale
For Sale: Off Roster CZ, Browning, PTR 91 Moving Sale
Originally posted by KWalkerMeh why bring logic into this, that makes too much sense... besides when you have bested a fool, you have accomplished nothing and he is a fool. -
Your longtime reloader friend is right: you can "neck size" with the full-length sizing dies by slightly bumping the case length back down when they have difficulty feeding. Depending on your rifle's chamber it might just perform a full-length size to take the diameter down to spec anyway, so if you absolutely want only neck sizing you need to pick up those dies instead.
Wow a minute later that makes little sense, let's try again. The full-length dies will also just size the neck if the chamber is "tight" as far as specifications, but might have the side effect of reducing the case diameter (detrimental to the purpose of neck sizing) for a "loose" chamber. Better?Last edited by sonnyt650; 05-31-2011, 8:57 AM.Comment
-
A note on corncob and smaller bottle necked cases, I had a bunch of .223 cases that were tumbled in corncob and I ended up with bits of media stuck in many cases that only dental tools could extract. I prefer smaller media granules now... crushed walnut hulls and similar. It would seem your sonic cleaner is more trouble than it's worth.Comment
-
You can't really do a full necksize with a FL die. You can however set the die to bump the shoulder .001-.003" while you necksize, which many people do. IMO it's a much better method than several neck sizings, followed by a FL size, then more neck sizing. The reason is, if you set the shoulder back everytime, on every piece of brass, you have the same case volume for every single one. If you only necksize, you case volume grows a little every firing, then you FL size and you have a significantly different case volume. That will change the firing characteristics.Your longtime reloader friend is right: you can "neck size" with the full-length sizing dies by slightly bumping the case length back down when they have difficulty feeding. Depending on your rifle's chamber it might just perform a full-length size to take the diameter down to spec anyway, so if you absolutely want only neck sizing you need to pick up those dies instead.
Wow a minute later that makes little sense, let's try again. The full-length dies will also just size the neck if the chamber is "tight" as far as specifications, but might have the side effect of reducing the case diameter (detrimental to the purpose of neck sizing) for a "loose" chamber. Better?
With that said, shoulder bumping is a bit advanced and I wouldn't jump straight to it. You'll need a headspace guage (hornady makes one) and while you're at it you'd want to seat to the ogive instead of the meplat, otherwise you're pissing in the wind. So get a comparator while you're at it,
hornady makes one of those too.Comment
-
I can absolutely confirm that if you use an RCBS rifle die and back it off contact 1/4 turn-ish, you will neck size only.
I can confirm that if you neck-size with an RCBS die but still go too heavy on the lube, you will still dent the shoulder.
I can confirm that if you neck-size brass using your RCBS die that was fired in a different rifle, there's a good chance you will jam your rifle. Don't ask how I know.Comment
-
Neck size = squeeze the neck diameter back down so it can hold a bullet
Full Length size = squish the case shorter
Imagine a steel turtleneck sweater. Put it on until the neck part is around your neck, you've now squeezed your head to the diameter of your neck. Now push the sweater even further down your body, you will force your shoulders down and shorten yourself. Tada! Simple, right? So you can use a full sized turtle neck sweater to necksize, just don't push it down all the way.==================
sigpic
Remember to dial 1 before 911.
Forget about stopping power. If you can't hit it, you can't stop it.
There. Are. Four. Lights!Comment
-
Have you ever gone onto 6mmbr.com? Some very good info on there.
I FL size my brass on every reload with the Redding Type S Bushing dies.
308 Shooter's Guide for .308 Winchester and .308 Win shooting, reloading, and 30-cal accuracy. Bullets, powder, brass, accurate loads. Rifles and gear reviews for .308 Win. 7.62x51 surplus ammo and ammunition reveiws. AccurateShooter.com is the best guide for precision shooting, with FAQ, Shooter Message Boards, Reader Polls, and Photo Gallery. Equipment reviews gun barrels, powders, primer, gunstock, dies, accurizing, ballistics, gunsmiths. Reloading, marksmanship, gunsmithing, and varminting.
I don't use a ultrasonic cleaner, so can't comment on the brown color. When I was considering a ultrasonic, I read up on the stainless steel media and decided to go with it.Comment
-
...and let me just add that if you put too much crimp on your necked rifle round, you WILL bulge the shoulder and it WILL NOT chamber....don't ask me how I know either.I can absolutely confirm that if you use an RCBS rifle die and back it off contact 1/4 turn-ish, you will neck size only.
I can confirm that if you neck-size with an RCBS die but still go too heavy on the lube, you will still dent the shoulder.
I can confirm that if you neck-size brass using your RCBS die that was fired in a different rifle, there's a good chance you will jam your rifle. Don't ask how I know.
I don't use an ultrasonic cleaner either, I just use my tumbler with walnut shell media. Comes out good. Keep it simple for a while, at least until you know what you're doing. Too many steps before you're ready may take the fun out of it. I full length size with my RCBS dies because I can.Last edited by coyotebait; 06-02-2011, 7:38 AM.R.I.P. Chris Kyle. 2/2/13Comment
-
-
Geez, almost forgot about 6mmbr; thats a very good site for info you're looking for. Now,diego-ted: your avatar is awesome! Like that stuff.Comment
-
Thx guys, I really appreciate all the help. I think I have the sizing down pact. I have both types of dyes. It’s seems there is a mixed consensus on which method is better. I am trying to make ammo at least as good as Federal Gold Match. I do agree there are so many steps that could be added to the process like weighing, sorting bullets and cases.
I do have a question, is primer pocket reforming done every time? I have the RCBS case prep station, which comes with a pocket cleaner “wire brush”, and then I ordered the pocket “sizer”.
I am sure more questions will come up as I move through the process.
Thx again
DiegoKeep them in the middle
DiegoComment
Calguns.net Statistics
Collapse
Topics: 1,870,960
Posts: 25,177,916
Members: 358,862
Active Members: 5,392
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 40865 users online. 124 members and 40741 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment