Unconfigured Ad Widget

Collapse

.223 77gr - load data?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Diabolus
    Veteran Member
    • Mar 2006
    • 4732

    .223 77gr - load data?

    Anyone have some load data for a .223 77gr with VV N540?

    Looking to go out to 600 yards. N540 seems like a great powder, heard some good reviews, but need validated data before I drop money on powder and boolits. I want to stick to a 77gr so I can use standard AR mags with the loads.

    Rifle is 18", 1 in 7" twist

    If anyone has an accurate round with another type of powder let me know.
    Last edited by Diabolus; 04-25-2011, 4:18 PM.
  • #2
    Bongos
    Veteran Member
    • Oct 2005
    • 4095

    I have a SCAR 16s which also has the 1:7 twist
    Most 69gr - 77 gr I can bet at best MOA
    223 = 24.6grn of varget 69gr SMK

    Surprisingly I'm getting half-MOA or better with these 53gr HP:
    223= 26.6grn of 748 53grn hp (SCAR16s Testing)
    223= 27grn of varget 53grn hp (SCAR16s 1/2" MOA)

    Comment

    • #3
      SixPointEight
      Veteran Member
      • May 2009
      • 3788

      Varget, RL15, Tac, BL-C(2), imr/h4895

      These are all popular with the 77's

      Comment

      • #4
        Ahhnother8
        Senior Member
        • Feb 2007
        • 1454

        Originally posted by Diabolus
        Anyone have some load data for a .223 77gr with VV N540?

        Looking to go out to 600 yards. N540 seems like a great powder, heard some good reviews, but need validated data before I drop money on powder and boolits. I want to stick to a 77gr so I can use standard AR mags with the loads.
        I burned a LOT of N540 shooting 77's. It is clean and accurate, but temperature sensitive and expensive. Depending upon the lot # of the powder and bullets, my load varied from 24-26 grains.

        THE LOAD for 77's is 24-24.5 grains of Varget. It is pretty much THE universal load in highpower competition. There really isn't any reason not to shoot this load.

        Typically, when shooting out beyond 500 yards, rounds are single loaded into the rifle. With that in mind, I would use an 80 grain bullet for those distances, as wind will push a 77 around a LOT. It's not about bullet weight. It's about the bullet profile and corresponding BC.

        Comment

        • #5
          Peter W Bush
          Calguns Supreme Overlord
          CGN Contributor - Lifetime
          • Jan 2009
          • 4727

          Varget, TAC, 4064, and 748 have shown good results for people with the 77gr SMKs. The only way to know which is best for your rifle is to try some of each.
          Will trade liquor/wine/beer for parts and accesories and ammo! PM me. Dont drink n shoot. Offer void where prohibited. Must be 21 or older, etc. etc.

          Originally posted by TURBOELKY
          Well, glad you got the kit anyways, I'm sure I'll fondle it a little in the near future..... oh God, that's going to be in somebody's signature....:D
          Originally posted by TURBOELKY
          put me in line, but if Peter W. Bush takes it, I need to be removed from his Signature line.......:D

          Comment

          • #6
            ocabj
            Calguns Addict
            • Oct 2005
            • 7924

            The one person I know who is (or at least was at some time) N540 in .223 for HP is Shawn McKenna. Lapua even advertises it on their website: http://www.lapua.com/en/lapua-team/l...a.html?team=19

            You might want to try and contact him for info. He's on the National Match Forums.

            24.0gr of RL15 or Varget is sufficient with 77s out to 600.

            Distinguished Rifleman #1924
            NRA Certified Instructor (Rifle and Metallic Cartridge Reloading) and RSO
            NRL22 Match Director at WEGC

            https://www.ocabj.net

            Comment

            • #7
              GeoffLinder
              Senior Member
              • Jul 2009
              • 2425

              Originally posted by JT1989
              Varget, RL15, Tac, BL-C(2), imr/h4895

              These are all popular with the 77's
              This! Varget & RL-15 are best choices under a SMK77 IME. Very insensitive to temperature and reasonable powder cost comparatively.

              Both Varget & RL-15 use same load data. Golden spot for me is 25.5 grs and COAL at 2.255" to 2.260"

              If you want to be sure this is an accurate load at long distance, make sure to use one batch/brand of cases and weight segregate them to within 2 grains of each other (use the ones outside this range for initial testing and practice) Doing that and using this recipe pretty much guarantees sub-moa performance to the horizon with the SMK77

              Comment

              • #8
                Hoop
                Ready fo HILLARY!!
                • Apr 2007
                • 11547

                I've tried all sorts of loads for mine and 24.3 varget cci reg primer is the best.

                edit: runner up was AA2460. TAC and 2230 were too temp sensitive. There is a huge thread at the top of this forum about 77 223 loads too.
                Last edited by Hoop; 04-25-2011, 5:30 PM.

                Comment

                • #9
                  Diabolus
                  Veteran Member
                  • Mar 2006
                  • 4732

                  I am not surprised to hear everyone recommending Varget. I'll start up some loads with that powder and 77gr boolits.

                  Comment

                  • #10
                    rg1
                    Member
                    • May 2008
                    • 274

                    Vihtavouri has a reloading guide on-line:
                    Beyond our barrel production, EABCO carries all you need for hunting and shooting from bipods, Rifle Rests to gun cases, EABCO gear and gun Cleaning.

                    Comment

                    • #11
                      Ahhnother8
                      Senior Member
                      • Feb 2007
                      • 1454

                      The only reason to use N540 is to eek out every last bit of velocity from your ammo. I can get an 80 JLK over 3,000 fps with it in an AR. If you don't need that kind of performance, there really isn't a need to use such a high energy powder.

                      Comment

                      • #12
                        brando
                        Veteran Member
                        • Feb 2006
                        • 3694

                        I tried N540 with my 77SMK load, particularly because I was getting good results in .308WIN with that powder. Unfortunately I couldn't seem to get enough velocity tolerance with that combo. I could get close to 2700fps without pressure issues, but the load seemed very sensitive to velocity. Some loads will still shoot very well even when the velocity spread is more than 50fps - this wasn't one of them.

                        Ultimately I found that N140 was a better choice. Yes, it doesn't run as hot as N540 in this cartridge, but I was still able to get close to 2700fps with accuracy and some velocity tolerance.
                        --Brando

                        Comment

                        • #13
                          Jonathan Doe

                          I use LC brass, Berger 77 grain bullets, 24.0 grains of Vit N140, seat the bullet .010" from the rifling. I shot RRA Varmint upper with 1-8" twist barrel. I get less than 1/2" group.

                          Comment

                          Working...
                          UA-8071174-1