Unconfigured Ad Widget

Collapse

Some real soft shooting 9mm data

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • XDRoX
    Veteran Member
    • Mar 2009
    • 4420

    Some real soft shooting 9mm data

    I've been working on some soft shooting loads for plinking. These were shot from a Glock 19 with factory springs. I tested 3 different powders. WST, WSF, and Bullseye.

    Function

    All these rounds functioned the pistol perfectly. BTW, this is a pretty new G19 so it's still pretty stiff. Less than 2k rounds through it. The brass was ejected away from the gun and the shooter. And the slide stayed back after the last shot.

    Cleanliness
    None of the rounds were as clean as I'd expected. WST was the cleanest followed by WSF followed by BE. But they were all pretty dirty compared to normal velocity rounds like my normal WST load. But a little filth is expected when playing with mouse farts.

    Recoil
    The BE loads were the lowest recoil but not much different than the other two. But they were also going the slowest. The difference between the WST and WSF was hardly noticeable. I'd give the slight advantage to WST since the recoil felt the same and it had a higher velocity. Compared to 115gr WWB, the difference was unbelievable. An 8 year old little girl could shoot these all day long. Extremely soft for 9mm. More of a push than a snap. Felt almost like really low recoil 45.

    Accuracy

    You'll have to wait until next week. I didn't give any concrete accuracy tests yet. My guess is WST will win as 900fps usually yields outstanding accuracy in these game loads. I will test them for accuracy soon though.

    So if your looking for a soft shooting 9mm load to get you mom or girlfriend to the range, you may want to try one of these out.

    Also if anyone wants me to email them this Excel spreadsheet, I'd be happy to, just PM me your email address.

    Chris
    <----Rimfire Addict


    Originally posted by Oceanbob
    Get a DILLON...
  • #2
    J-cat
    Calguns Addict
    • May 2005
    • 6626

    Interesting.

    I'm working on a 147/Bullseye project on my own... but with heavier charges: 3.5, 3.7, and 4grs. My OAL is longer, closer to 1.169".

    Comment

    • #3
      XDRoX
      Veteran Member
      • Mar 2009
      • 4420

      Originally posted by J-cat
      Interesting.

      I'm working on a 147/Bullseye project on my own... but with heavier charges: 3.5, 3.7, and 4grs. My OAL is longer, closer to 1.169".
      I also shot 3.5gr of BE today. I'll post the data later tonight so we can compare.
      Chris
      <----Rimfire Addict


      Originally posted by Oceanbob
      Get a DILLON...

      Comment

      • #4
        Bongos
        Veteran Member
        • Oct 2005
        • 4095

        Don;t have a Chrono but I needed some bullets for my 100yr old Luger P-08, what I got was 4.3gr of 231 behind a 115gr RN, 5 rounds touching (cloverleaf) at 7 yards off hand weaver stance...

        Comment

        • #5
          XDRoX
          Veteran Member
          • Mar 2009
          • 4420

          Originally posted by Bongos
          Don;t have a Chrono but I needed some bullets for my 100yr old Luger P-08, what I got was 4.3gr of 231 behind a 115gr RN, 5 rounds touching (cloverleaf) at 7 yards off hand weaver stance...
          Thanks for the input. Do you ever have any issues with the 115gr bullets? Lugers were designed when all 9mm bullets were 124gr, and most of the ones I've shot won't function 100% without 124gr bullets. My buddy had a Luger that would jam constantly with WWB. We tried some of my 124gr reloads and it worked flawlessly. I don't think I've shot my Luger in over 15 years. Cool guns though.
          Chris
          <----Rimfire Addict


          Originally posted by Oceanbob
          Get a DILLON...

          Comment

          • #6
            Bongos
            Veteran Member
            • Oct 2005
            • 4095

            Originally posted by XDRoX
            Thanks for the input. Do you ever have any issues with the 115gr bullets? Lugers were designed when all 9mm bullets were 124gr, and most of the ones I've shot won't function 100% without 124gr bullets. My buddy had a Luger that would jam constantly with WWB. We tried some of my 124gr reloads and it worked flawlessly. I don't think I've shot my Luger in over 15 years. Cool guns though.
            No problems, once it hit the 4.2gr it function fine, 4.3 just happen to be the most accurate. Funny thing is, my friend had a S42 P-08 and it like the Miwall gunshow reloads. I load mostly rifle and 44 mag, 9mm is a pain in the butt to load...so I just load for the p-08

            Comment

            • #7
              SixPointEight
              Veteran Member
              • May 2009
              • 3788

              You're on the right track. Heavy bullet, fast powders, typically team up to give a nice light shooter. 180gr lead +red dot in .40 was less recoil than a .380 it seemed. My gf likes to shoot red dot under a 124gr, loaded to minor PF.

              Comment

              Working...
              UA-8071174-1