Unconfigured Ad Widget

Collapse

load data: 75 gn A-max for 223

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Kerplow
    Calguns Addict
    • Dec 2009
    • 8875

    load data: 75 gn A-max for 223

    I need load data for varget and h335. COAL, too.

    Hornady said they were sending me some months ago.
    Originally posted by MelvinoelGreat**
    My friend, your Chargers sure are looking good tonight. They are only losing by 14 at the half, not to bad my friend.
  • #2
    vinny_land
    CGN Contributor
    • Dec 2007
    • 3374

    According to the Hornady manual 8th edition:
    75gr A-Max for Varget starts at 19.4gr to max load of 23.5gr for velocity of 2200-2600 respectively. C.O.L. is 2.390" (page 169)

    According to Lyman 49th:
    75gr A-Max for H335 starts at 22.5 to max load of 25.1 for velocity of 2577-2850. COL is agin 2.390" (page 139)

    From the Hodgdon website
    "1911 mag, twinkie, twinkie, cupcake, primary weapon mag"

    sigpic

    Comment

    • #3
      GeoffLinder
      Senior Member
      • Jul 2009
      • 2425

      FWIW, I run 24.5gr Varget under 77gr bullets so you should be able to use the data if you start 10% under and work up.

      For OAL, I would recommend going 2.250 to 2.255" range. This longer OAL lowers pressure and shortens bullet jump to lands. For AR's this is about max fit magazine length anyway.

      Comment

      • #4
        Twinspool
        Member
        • Nov 2007
        • 279

        Originally posted by GeoffLinder
        FWIW, I run 24.5gr Varget under 77gr bullets so you should be able to use the data if you start 10% under and work up.

        For OAL, I would recommend going 2.250 to 2.255" range. This longer OAL lowers pressure and shortens bullet jump to lands. For AR's this is about max fit magazine length anyway.
        The A-max uses a secant ogive, seat it at that OAL and you'll have shoved the bullet into the case. Bearing lengths are different too so 24.5 is not a valid recommendation.
        FWIW, 24.5 grains of Varget was causing CCI primers to crater in my rifle.

        Comment

        • #5
          Kerplow
          Calguns Addict
          • Dec 2009
          • 8875

          Thanks, guys. I will be shooting these through my ar so it will be a single shot affair. I probably would never have got these but i cant find 77 gn smk's locally to save my life. I did however,manage to score some 75 hornady hpbt but they wont be in for a week or so.
          Originally posted by MelvinoelGreat**
          My friend, your Chargers sure are looking good tonight. They are only losing by 14 at the half, not to bad my friend.

          Comment

          • #6
            GeoffLinder
            Senior Member
            • Jul 2009
            • 2425

            Originally posted by Twinspool
            The A-max uses a secant ogive, seat it at that OAL and you'll have shoved the bullet into the case. Bearing lengths are different too so 24.5 is not a valid recommendation.
            FWIW, 24.5 grains of Varget was causing CCI primers to crater in my rifle.
            Which is why I note to reduce by 10% which puts you smack dab in the middle of the Lyman data noted earlier.

            I stand corrected on the OAL for this bullet though.

            Comment

            Working...
            UA-8071174-1