Unconfigured Ad Widget

Collapse

Headspace gauging for accuracy

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • 1norcalvarmintHunter
    Senior Member
    • Jan 2007
    • 984

    Headspace gauging for accuracy

    I have been floating for quite sometime and now been using my hornady case guage to determine headspacing in various rifles.

    You can make your own and there are several threads on the net to do this.

    If anyone wants I will make a write up on how to do this for 223 and 308?

    Otherwise I won't waste time.
    "It is plain and simple if our regular law abiding population is forced to be unarmed we will then fall victim to prey as those with arms will become our predators."
  • #2
    rsrocket1
    Veteran Member
    • Feb 2010
    • 2774

    After reading a bunch of threads and other websites I figured out the same just recently and it is a great tool for bolt action rifles or to simply figure out the headspace on your particular gun using already fired shells, a marker and the headspace tool. A lot of new reloaders also don't know what it means or how to "bump the shoulder back a couple of mils". It would be a great sticky. You could also describe what the difference between full length resizing, partial resizing and neck sizing only.

    I've come across a lot of new reloaders on various forums who can't figure out why their reloaded rounds won't chamber.

    Comment

    • #3
      1norcalvarmintHunter
      Senior Member
      • Jan 2007
      • 984

      Ok maybe you want to help me with the literature etc I'll pm you and you can review before I post?
      "It is plain and simple if our regular law abiding population is forced to be unarmed we will then fall victim to prey as those with arms will become our predators."

      Comment

      • #4
        rsrocket1
        Veteran Member
        • Feb 2010
        • 2774

        Sounds good.

        Comment

        • #5
          killshot44
          Veteran Member
          • Nov 2009
          • 4072

          Originally posted by 1norcalvarmintHunter
          I have been floating for quite sometime and now been using my hornady case guage to determine headspacing in various rifles.

          You can make your own and there are several threads on the net to do this.

          If anyone wants I will make a write up on how to do this for 223 and 308?

          Otherwise I won't waste time.
          You might include the basics and pics of how to use the Hornady OAL gauge, too.
          I used to use the split-case and smoked bullet method but am sold on using the proper tool. Much more repeatable results. Once you buy one, you can easily thread the caseheads of any other calibers you want to measure the chamber of. I wouldn't try precision reloading without it. (magazine-length-only loading being the exception)

          Comment

          • #6
            1norcalvarmintHunter
            Senior Member
            • Jan 2007
            • 984

            Agreed!!! There is a custom tap for the thread pitch for the oal gauge. I'll go get it an post it
            "It is plain and simple if our regular law abiding population is forced to be unarmed we will then fall victim to prey as those with arms will become our predators."

            Comment

            • #7
              1norcalvarmintHunter
              Senior Member
              • Jan 2007
              • 984

              5/16-36 tap
              Letter I or j drill for tap
              "It is plain and simple if our regular law abiding population is forced to be unarmed we will then fall victim to prey as those with arms will become our predators."

              Comment

              • #8
                gorblimey
                Senior Member
                • Jun 2007
                • 1522

                Thanks for the tap info. My current case selection is inadequate.

                Comment

                • #9
                  1norcalvarmintHunter
                  Senior Member
                  • Jan 2007
                  • 984

                  You can order a tap and drill bit from Easton in Colorado for about 15 shipped
                  "It is plain and simple if our regular law abiding population is forced to be unarmed we will then fall victim to prey as those with arms will become our predators."

                  Comment

                  • #10
                    rsrocket1
                    Veteran Member
                    • Feb 2010
                    • 2774

                    1norcalvarmintHunter,
                    YGPM

                    Comment

                    • #11
                      1norcalvarmintHunter
                      Senior Member
                      • Jan 2007
                      • 984

                      Rsr, thank you.

                      I sent you a email. Ley me know what you think.
                      "It is plain and simple if our regular law abiding population is forced to be unarmed we will then fall victim to prey as those with arms will become our predators."

                      Comment

                      Working...
                      UA-8071174-1