Unconfigured Ad Widget

Collapse

Question about Bullets

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • pklin1297
    Veteran Member
    • Sep 2006
    • 3287

    Question about Bullets

    Hello all,

    when reloading with bullets not specified in the manual, for example Sierra 185 gr. FPJ .45 ACP is specified in the data, but instead Brand X 185 gr. FP TMJ .45 ACP is used, what are some things to watch out for when substituting bullets of the same weight and profile, but not necessarily the same height? What about same weight but different profile and height?

    How do you determine the OAL or do you just stick with the OAL specified in the manual but just make sure it chambers? The Sierra manual says do not substitute a different bullet for the one in the book, but the Brand X bullets may be just as good and you get three times more bullets for the same price so it is tempting to use.

    Thanks!
    NRA Member, CAPRC Member
  • #2
    C.G.
    Calguns Addict
    • Oct 2005
    • 8259

    If the bullets are longer you may end up with compressed powder, which is not good. There are ways to calculate loads for bullets by dimensions, but I have yet to get into that territory and won't for a while.
    I wouldn't mess around unless you know what you are doing.
    Search for loads that have been tried and start with the lowest powder drop, i. e.:
    sigpic

    Comment

    • #3
      Fjold
      I need a LIFE!!
      • Oct 2005
      • 23090

      With bullets of the same weight and construction (ie, lead, copper jacketed) reduce the load back to the starting load for that powder and work your way back up. Sierra says not to substitute bullets because they don't want you using the maximum loads with bullets that they haven't tested the load on.

      If you look at that reloading data for some powder companies they may not even specify which bullets that they used in the testing, they may just say "230 grain lead roundnose" or "185 grain lead semi-wadcutter", because they feel that the load will be safe with any of those bullets.

      Load the substitute bullets to the same overall length to fit your magazine.
      Last edited by Fjold; 07-19-2007, 8:46 PM.
      Frank

      One rifle, one planet, Holland's 375




      Life Member NRA, CRPA and SAF

      Comment

      • #4
        pklin1297
        Veteran Member
        • Sep 2006
        • 3287

        Seems that the reloading manuals from powder manufacturers will have more combinations since they are not stuck with using just their bullets, like the bullet makers and their manuals. I will give that a try.

        Thanks guys.
        NRA Member, CAPRC Member

        Comment

        Working...
        UA-8071174-1