Tweet
Can 9mm dies be used to load 380acp?
Thanks,
OG
Thanks,
OG
-
-
yes, but...
Depending on the dies, you may not be able to get all of the bell out of the case mouth.Left, not "liberal", not what gets called "left" in American politics, Actually Left, like the government shouldn't be set up to favor certain groups, radically and fanatically left, like the ideas in the American Constitution (except that crap about 3/5ths of a person). -
No. The 9mm is a tapered case and the. 380 is a straight wall case.------------------------------------------------Comment
-
No! Since the .380 ACP case runs form the base .374 to the neck .373. 9MM from the base runs .391 to the neck .380. As you can see there is a bit of difference there.
Chief
XL-650 to feed the: .45ACP's Les Baer Concept V, Ruger SR 1911, Ruger Nightwatchman,custom built Colt M1911, Springfield .45ACP Loaded.. 9MM SA Range Officer,Ruger P-85, Springfield Stainless 9MM loaded, SA 9MM 5.25" XDM, Springfield 9mm Stainless Range Officer, STI double stack .45ACP.
IDPA A41750 Safety Officer
NRA Certified RSO
"Stay out of the deep end of the pool; correct the problem with your credit card, not your dremel!"Comment
-
Definitely not the sizing die. Maybe on the expander, seating & crimp dies. You'd need a smaller shellholder too. Why not just take out the guesswork, buy the Lee carbide set. It doesn't cost a lot and works great for me.Comment
-
Thanks for help guys. I guess I will get a set of 380 dies.Comment
-
Yep, my advice is to get the 380 dies. also, don't expand the case mouth to far - only as far as necessary to get the bullet started straight. 380 cases are really picky about expansion and over-expansion will greatly reduce the case life.Comment
There are currently 13029 users online. 55 members and 12974 guests.
Most users ever online was 239,041 at 10:39 PM on 02-14-2026.
Comment