Unconfigured Ad Widget

Collapse

Need .45 GAP Loading Info

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • the big ravioli
    CGN/CGSSA Contributor
    CGN Contributor
    • Jan 2009
    • 1167

    Need .45 GAP Loading Info

    I'm looking to reload some .45GAP rounds. Does anyone have a good combo for reloading?

    New to reloading and want to start to get into it. I have so much brass that I keep saying I'm going to reload. Well it's time.. The workbench is cleaned off and I'm setting up a loading area now.

    So if any of you have a good idea and want to help out, I thank you in advance.

    Thanks
    sigpic
    NRA Life Member
    Respect is earned - Honesty is appreciated
    Trust is gained - Loyalty is returned
  • #2
    the big ravioli
    CGN/CGSSA Contributor
    CGN Contributor
    • Jan 2009
    • 1167

    It's hard to belive no one has any info on the 45GAP round?? I know it's not the most loved round out there but at least it's not the 10mm.. I guess it's time to read the books and try some combos from them?

    Thanks
    sigpic
    NRA Life Member
    Respect is earned - Honesty is appreciated
    Trust is gained - Loyalty is returned

    Comment

    • #3
      coyotebait
      Senior Member
      • Jan 2011
      • 1319

      No GAP here, best advice I can give is to get a loading manual and start loading some test loads. Start light and increase your charge in small increments until you find one that feels right. Watch for signs of excessive pressure. Good luck.
      R.I.P. Chris Kyle. 2/2/13

      Comment

      • #4
        bumpo628
        Senior Member
        • Nov 2009
        • 1142

        I have a 45 ACP and I like W231 (same as HP38).

        According to the Hodgdon website, here are two loads for the 45 GAP:
        Bullet Wt (Gr.) Mnfctr Powder Bullet Diam. C.O.L. Grs. Vel. (ft/s) Pressure Grs. Vel. (ft/s) Pressure
        185 GR. HDY XTP Winchester 231 .451" 1.060" 4.8 841 18,200 PSI 5.5 951 21,500 PSI
        200 GR. SPR GDHP Winchester 231 .451" 1.080" 4.5 796 18,400 PSI 4.9 860 20,700 PSI

        Ronald Reagan once said that the most terrifying words in the English language are: "I'm from the government and I'm here to help".
        Download my alloy calculator here: http://castboolits.gunloads.com/showthread.php?t=105952

        Comment

        • #5
          zfields
          CGN Contributor
          • Aug 2010
          • 13658

          Do you not have a reloading manual? If you dont, stop whatever you are trying to do, and go buy one before you hurt yourself.
          Sandstorm Custom Rifle Slings : Custom Paracord slings

          10% off slings for calguns members. PM for details. Like us on facebook!

          Comment

          • #6
            iareConfusE
            Veteran Member
            • Jan 2010
            • 4464

            You didn't list a powder that you'd be using.
            You didn't list the bullet and weight you'd be using.

            These are crucial bits of info any reloader should know to have prior to reloading a batch, which leads me to believe that you need a reloading book that needs to be read cover to cover.

            Comment

            • #7
              CEDaytonaRydr
              Veteran Member
              • Feb 2010
              • 4142

              The Hodgdon site is very helpful.

              If you plan on using an Alliant powder, check out the Alliant page:



              I suggest alliant Unique. My 45 ACP loads with 200gr bullets and 6.0gr of Unique are the most accurate 45 loads I've ever made...

              Comment

              • #8
                postcg
                Junior Member
                • Jan 2011
                • 21

                I reload .45 GAP

                ***PLEASE DO NOT USE THESE LOADS WITHOUT WORKING UP THE LOAD PROPERLY***

                Among other calibers, I also reload .45 GAP. The Lyman 49th Edition manual is good place to start. The powders I use for GAP is Blue Dot (8.6gr), Titegroup (4.6gr), and Bullseye (5.0gr). I shoot 200gr flat point jacketed bullets, COAL is set to 1.08". PM me if you want some additional information. Again, PLEASE DO NOT USE THESE LOADS WITHOUT WORKING UP THE LOAD PROPERLY.

                Just like anything else, be careful with any load you see on the internet. What works for my gun, with my primers, with my powder might not work for you.

                PM me if you want more info. I'll try to help you out if I can.

                Stay Safe

                ***EDIT: If you want to get rid of some of that GAP brass, I'll be glad to take it off you hands.
                Last edited by postcg; 02-07-2011, 5:53 PM. Reason: Added brass request.

                Comment

                • #9
                  the big ravioli
                  CGN/CGSSA Contributor
                  CGN Contributor
                  • Jan 2009
                  • 1167

                  Thanks to all who have given good advise.. I do have a couple books but it never hurts to ask ?'s about anything you don't know much about..

                  There is always someone who has been, done or just screwed around with something before you.

                  POSTCG - I will PM you when I need some more info, thanks

                  So once again thanks to all!
                  sigpic
                  NRA Life Member
                  Respect is earned - Honesty is appreciated
                  Trust is gained - Loyalty is returned

                  Comment

                  Working...
                  UA-8071174-1