Unconfigured Ad Widget

Collapse

Case lube

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • coyotebait
    Senior Member
    • Jan 2011
    • 1319

    Case lube

    What case lube are you all using? I'm getting some dimpling (not too bad) but if I can eliminate it all together, well, that would be swell. I'm currently using Hornady Unique Case Lube. It's like butter in a small tub. Anything better?
    R.I.P. Chris Kyle. 2/2/13
  • #2
    joelogic
    Calguns Addict
    • May 2008
    • 6597

    Dillon spray lube.
    Micro/Mini Reflex Red Dot Sight Mount for the M1, M1a/M14 platform

    Comment

    • #3
      rsrocket1
      Veteran Member
      • Feb 2010
      • 2774

      Dillon spray lube
      Liquid lanolin + 90-99% Isopropyl alchohol (same as above)
      STP oil treatment
      Lee paste lube
      Bag Balm
      Vasilene

      I tried all of these because I already had them and didn't go out of my way to buy anything else.

      A lot of guys swear by Imperial sizing wax. Never tried it, but maybe someday I will if I run out of all the above

      The above all worked fine for .223. The best for .308 was the Bag Balm which is a mixture of lanolin in petroleum jelly. The application was a very thin coat down the entire length of the case wall. Too much and it will plug the air vent hole near the shoulder which will eventually result in a dented shoulder. With that lube on the big case, sizing was smooth with no hint of a case anywhere near getting stuck. One quick swipe with a towel and it was clean, but I also run the batch in a tumbler for 1 more hour just to be sure.

      If you mean a dented shoulder when you say "dimpling", take your sizing die apart and clean it out, especially around the shoulder and poke out any lube stuck in the air vent hole if there is one in your die. It also means you should use less lube spread out more evenly.

      Comment

      • #4
        uscbigdawg
        Senior Member
        • Nov 2007
        • 1869

        Dillon or Horny One Shot. All you need.

        Rich
        "Speed is a tactic!" - R.W.

        "Pressure is what you feel when you don't know what you're doing." - Chuck Knox

        "The callus on my finger is from my trigger, not the keyboard!" - Rob Leatham

        Comment

        • #5
          f4tweet
          Senior Member
          • Oct 2005
          • 2022

          I use the RCBS roll pad and RCBS lube. I have never had a problem.

          Comment

          • #6
            z-bob
            Member
            • Sep 2010
            • 238

            Dillon (or Cabela's) Spray Lube on .30 Carbine brass, Kiwi Mink Oil (applied sparingly with fingertips) on .30-06's.
            "Nobody wins in a Dairy Challenge" --Kenny Rogers

            Comment

            • #7
              freonr22
              I need a LIFE!!
              • Dec 2008
              • 12955

              imperial sizing wax
              sigpic
              Originally posted by dantodd
              We will win. We are right. We will never stop fighting.
              Originally posted by bwiese
              They don't believe it's possible, but then Alison didn't believe there'd be 350K - 400K OLLs in CA either.
              Originally posted by louisianagirl
              Our fate is ours alone to decide as long as we remain armed heavily enough to dictate it.

              Comment

              • #8
                coyotebait
                Senior Member
                • Jan 2011
                • 1319

                Originally posted by rsrocket1
                Dillon spray lube
                Liquid lanolin + 90-99% Isopropyl alchohol (same as above)
                STP oil treatment
                Lee paste lube
                Bag Balm
                Vasilene

                I tried all of these because I already had them and didn't go out of my way to buy anything else.

                A lot of guys swear by Imperial sizing wax. Never tried it, but maybe someday I will if I run out of all the above

                The above all worked fine for .223. The best for .308 was the Bag Balm which is a mixture of lanolin in petroleum jelly. The application was a very thin coat down the entire length of the case wall. Too much and it will plug the air vent hole near the shoulder which will eventually result in a dented shoulder. With that lube on the big case, sizing was smooth with no hint of a case anywhere near getting stuck. One quick swipe with a towel and it was clean, but I also run the batch in a tumbler for 1 more hour just to be sure.

                If you mean a dented shoulder when you say "dimpling", take your sizing die apart and clean it out, especially around the shoulder and poke out any lube stuck in the air vent hole if there is one in your die. It also means you should use less lube spread out more evenly.
                Where I'm having the most issues is decapping .223. If I don't use a bunch of lube, the case ends up getting stuck and ripping out of my shell plate. Then the profanity ensues and one more case is thrown in the trash. I go back and wipe as much of it off as I can, and last night when I finished I threw my rounds in the tumbler over night. Shut it off this morning but haven't checked them to see how they turned out yet.
                R.I.P. Chris Kyle. 2/2/13

                Comment

                • #9
                  rsrocket1
                  Veteran Member
                  • Feb 2010
                  • 2774

                  I hear you on the stuck .223's. It's really annoying when they pull out of the shell holder. Make sure the lube goes all the way down the case. Don't assume a liberal spread near the top will work its way down toward the bottom. It doesn't.

                  A thin, uniform coating works much better than a thick glob which will not spread down the case. After several stuck cases, I'm sure you know the feeling of "I think this case is going to rip out of the shell holder".

                  Also, make sure you clean off the die periodically.

                  Comment

                  • #10
                    bohoki
                    I need a LIFE!!
                    • Jan 2006
                    • 20826

                    ive done so many thousands with vasaline it cleans off well i just lube up my proctological poker and wipe each one as i place them in the shellholder

                    then drop them on a white teeshirt

                    after i am done i fold shirt in half and rub them around and they come out shiny and clean

                    any residue gets cleaned off when i am trimming them with the possum hollow

                    Comment

                    • #11
                      EmmaGoldman
                      Member
                      • Jan 2011
                      • 369

                      a rag (barely) damp with kroil
                      Left, not "liberal", not what gets called "left" in American politics, Actually Left, like the government shouldn't be set up to favor certain groups, radically and fanatically left, like the ideas in the American Constitution (except that crap about 3/5ths of a person).

                      Comment

                      • #12
                        GeoffLinder
                        Senior Member
                        • Jul 2009
                        • 2425

                        Originally posted by coyotebait
                        What case lube are you all using? I'm getting some dimpling (not too bad) but if I can eliminate it all together, well, that would be swell. I'm currently using Hornady Unique Case Lube. It's like butter in a small tub. Anything better?
                        Dimpling or creases mean too much lube. A little dab'l do ya' here, less is more

                        I use Dillon too, light spray over a couple hundred cases in a cut down cardboard box, shake the box and go.

                        Tried everything else, Dillon is best for me. Imperial Sizing Wax #2 and everything else dead last!

                        Comment

                        • #13
                          killshot44
                          Veteran Member
                          • Nov 2009
                          • 4072

                          Imperial Sizing Wax. Lasts forever. A little bit on your index finger and thumb, roll it as you put the case into the shellholder. Re-"wet" your fingers every 3-4 cases.

                          Don't forget to clean your damn dies! They can get crappy/sticky/scratchy. Haven't stuck a case yet.

                          /crosses fingers

                          Comment

                          • #14
                            Munk
                            Senior Member
                            • Jun 2010
                            • 2124

                            I've just got an old RCBS case lube pad, and some Lyman lube.

                            A quick thin zip of lube down the pad, spread it wide with your finger and you're good for 30-40 cases minimum. (.30-06).
                            Originally posted by greasemonkey
                            1911's instill fairy dust in the bullets, making them more deadly.

                            Comment

                            • #15
                              Stryfe76
                              Senior Member
                              • Feb 2009
                              • 744

                              Originally posted by killshot44
                              Imperial Sizing Wax. Lasts forever. A little bit on your index finger and thumb, roll it as you put the case into the shellholder. Re-"wet" your fingers every 3-4 cases.

                              Don't forget to clean your damn dies! They can get crappy/sticky/scratchy. Haven't stuck a case yet.

                              /crosses fingers
                              I use Kiwi brand Mink oil the same way Killshot44 uses the imperial sizing wax.

                              Comment

                              Working...
                              UA-8071174-1