Help with 45acp ande 44 mage loads

[coyotekiller56]

I am working on a load for my 45acp using the Laser Cast 230gr LRN and my 44mag using the Silver State Bullet, 240Gr LSWC.
Using Unique for both, cannot find any site for their bullets to confirm a load. Anybody have a good target load for these?
Thanks
CK

[BigBronco]

You do not need specific data for the manufacturer of the bullet. If it is lead then any lead load data for the same powder and bullet weight will be acceptable. Work up your load for safety sake and watch for pressure signs.

[GeoffLinder]

Alliant website shows the following recipes for Unique

.45 ACP 230gr LRN

44mag 240gr LSWC

Start a half grain lower than specified and work it back up. Lead bullet data for the same weight bullet is good enuff, you don't need data for the exact same brand bullet, just back it off a hair and start there.

[bruceflinch]

That was easy! Good job, Guys.

[coyotekiller56]

Thanks!
Wanted to make sure I loaded safe>