Looking fort tips to start out.

[markslyon]

I would like to load primarily 416 Barrett. 2nd priority would be 5.56 and 7.62x51.

What do you guys recommend I get for a entry level starting setup? Make? Model kit/press? Is there a decent all in one starter kit?

[RaymondMillbrae]

Search function.

There are a ga-bazillion threads on Calguns on this very topic.

In Christ: Raymond

[markslyon]

K lemme look thanks!

[RaymondMillbrae]

Didn't mean to sound rude.

Do a quick search on this very forum (AMMO & RELOADING) and you will see a bunch of threads regarding your query.

I believe this has got to be the most frequently asked question I have ever read. A quick search will usually have you fullfilled for a few hours. (Of reading).

If you have "specific questions" regarding certain pieces of equipment, their usage, or reloading components/data...ask right ahead!!

Wecome to the forum!!

In Christ: Raymond

[markslyon]

No offense taken. I was lazy. It looks to me like Dillon has some great "starter" kits. RCBS is local to me by a little on the pricey side

[GeoffLinder]

RCBS RockChucker supreme single stage kit is a good way to start. Midway USA is best place to buy RCBS.

http://www.midwayusa.com/viewproduct/?productnumber=646599

Dillon progressives are more complicated and expensive but can't be beat for longterm value. BrianEnos.com is best place to buy Dillon.

http://www.brianenos.com/pages/dillon.html

[00Mrgreen]

One thing to remember, is RCBS, Lyman and I believe Hornady presses and dies are
interchangeable while Dillon's products are threaded differently. If you go with a Dillon press be ready to buy all Dillon dies.

[joelogic]

First post and it's fud? I use rcbs and lee dies on my dillon. What gives?

[Chief-7700]

One thing to remember, is RCBS, Lyman and I believe Hornady presses and dies are
interchangeable while Dillon's products are threaded differently. If you go with a Dillon press be ready to buy all Dillon dies.

So are Dillon's with the exception of the Square Deal B which uses a special threaded dies.

Please do more research before posting misleading information.

[Cowboy T]

Waitasec...he's reloading .416 Barrett? Can you even do that on a progressive press affordable by mere mortals like us?

Personally, I'd suggest either a Rockchucker Supreme or a Lee Classic Cast press for that kind of stuff, and a Classic Turret Press for his 5.56 and 7.62x51.