Unconfigured Ad Widget

Collapse

Shot shell questions

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bucktooth7
    Member
    • Feb 2010
    • 311

    Shot shell questions

    Santa was good to me and bestowed a Lee Load All shot shell reloader. It is a very basic model as I'm sure you know but a good place to start.
    The instruction manual and load chart provided mention 2 types of shells (hulls) paper base wads and plastic or no base wad. The paper base wad uses a larger charge than the plastic or no base wad.
    Question#1 Will a paper base wad burn up when the shell is fired? It seems to me that it would.

    Question #2 How can I identify what type of shells I have?

    This seems to be quite important as the difference between the 2 loads is considerable.

    I shoot trap and skeet and have always used factory shells and never really looked at the inside of the spent hulls. Please, set me straight on this!
    We will do as we will do because I am me and you are you.
  • #2
    LexLuther
    Senior Member
    • Dec 2008
    • 838

    Not sure if it burns, but it doesn matter, you dont re-use them.

    You should buy or get a regular shotshell reloading book, it will have lots of info on how to identify the shells. I would recommend picking one brand / kind and sticking with it exclusively. I have the cheap lee loader, and think its great. My shells pattern better than factory, its very rewarding. Have Fun!
    "I love it, its my second ammendment but we with the gun was the only thing between those guys and the oven and they still can't know this theys too dumb and I seen the ovens. They dont know it but they cant take all the guns and if ever, push ever comes to shove we'll be back." - Don Burgett

    Comment

    • #3
      Southpaw45
      Senior Member
      • Sep 2008
      • 2333

      Like Lex said. You need to get yourself a good shotshell reloading manual before you start. I recommend this one. >> http://www.midwayusa.com/viewProduct...tNumber=887011
      The info your going to get in that little reloading manual that came with the press isnt enough info to start out right with. There are several different types of hulls. All paper, all plastic, plastic with a paper base wad, steel base, brass base and so on. Dont get to caught up with the types there discribing. Whey you fire a hull thats all paper or has a paper base wad, there is a distinct smell to them. Some shooters like the smell. It is the smell of the paper burning but it aint like its catching on fire. It just get a little discolored. Thats all. You are going to want to reload a quality hull thats all plastic with a brass base. You can reload other cheep hulls like the cheep stuff from Walmart but it just aint worth the trouble. The Hulls that are most favored for reloading are Winchester AA, Remington STS and Federal Premium. These are reloaded more than any other hull because of the quality one piece plastic used for the hull and the all brass base. They last longer than most. Just get this manual and follow the recipes to the T and you will be alright. Be safe and take your time. And remember when you crimp closed the shell and something isnt fitting right, that means there is something wrong. Correct the problem at the reloading bench and double check everything.
      Cowboy Action Shooter
      Midnight Black Powder Shooter
      S.A.S.S #74217
      Have Guns Will Travel
      .45 Colt Enthusiast
      ΜΟΛΩΝ ΛΑΒΕ

      Comment

      • #4
        bumpo628
        Senior Member
        • Nov 2009
        • 1142

        The paper base wad shells are not very common in my experience. The two types that I come across regularly are the plastic base wad and no base wad shells. The plastic base wad shells are found in the cheap wally world bulk packs. The no base wad shells are typically found in the Winchester AA or Remington shells.

        The difference is that the plastic wad can come loose and lodge in the barrel, causing a kB when the next shell is fired. This can't happen when there is no base wad, obviously.

        You can reload either type, but you need to inspect the plastic base wad shells more carefully to make sure that they don't look loose or worn. Discard if there is any doubt. Read the Lyman shotshell reloading manual for details on how many times they should be reloaded before being discarded. The no base wad shells can be reloaded until they crack or fall apart.

        You can buy used AA hulls at some reloading stores.
        or here: http://www.midwayusa.com/viewProduct...tNumber=919074
        or here: http://leadandbrass.com/zencart2/ind...fb4f03aa7423d4


        edit:
        Follow the recipes in the published manuals exactly.
        Find a recipe you like, then buy the components - not the other way around.

        edit 2:
        Alliant Promo is a good, cheap powder to start with. Sold only in 8 lb jugs. Uses the same load data as Red Dot.
        Here is the load data on pdf: http://glarp.atk.com/2010/2010_Catal...adersGuide.pdf
        Go here to order a paper copy: http://www.alliantpowder.com/resources/catalog.aspx
        You can buy reclaimed shot for about $1 per lb.
        Last edited by bumpo628; 12-28-2010, 11:55 PM.
        Ronald Reagan once said that the most terrifying words in the English language are: "I'm from the government and I'm here to help".
        Download my alloy calculator here: http://castboolits.gunloads.com/showthread.php?t=105952

        Comment

        • #5
          bucktooth7
          Member
          • Feb 2010
          • 311

          Thanks for the great info. Shot shell manual on order.
          We will do as we will do because I am me and you are you.

          Comment

          • #6
            AAShooter
            CGN/CGSSA Contributor
            CGN Contributor
            • May 2010
            • 7188

            If you can track down an NRA Shot Shell Reloading class you might want to check it out.

            Comment

            • #7
              AAShooter
              CGN/CGSSA Contributor
              CGN Contributor
              • May 2010
              • 7188

              Many trap ranges have people that sell reloading components. Some shooters collect and sell their hulls to reloaders. Sometimes at the larger shoots you can pick up hulls the shooters leave or toss.

              Comment

              • #8
                Sideline Shooter
                Senior Member
                • Jan 2009
                • 514

                Get a hull that has no base wad. Paper base wads can collect moisture, ruin gunpowder, expand making the volume space smaller within the hull, come apart and lodge in the barrel. Plastic inserts can break loose too and eventually do. Remington hulls are best to avoid the base wad headache. Winchester AAHS (HS=high strength) still has a plastic insert that can come loose, so why deal with it. Just be aware that the Remington hulls have a 6 and 8 point crimp, just sort through them.

                Comment

                • #9
                  kmca
                  Senior Member
                  • Oct 2005
                  • 2371

                  All hulls have basewads, some are just integral with the hull. The separate basewad in the AAHS hulls sometimes did come loose, but that has been addressed by Winchester. The Remington STS hull has the integral basewad. All of the lower priced hulls, that I can think of, have paper basewads and weren't really meant to be reloaded. Paper basewads aren't bad. If you're old enough to remember Federal Paper and Winchester Super Target paper hulls, they're considered the premium hull to reload. When they're used up, they develop pin holes around the base.

                  Comment

                  • #10
                    BigBronco also not a Cabinetguy
                    Calguns Addict
                    • Jul 2009
                    • 7084

                    Yes the paper hulls were sought after for hot loads. I have a bunch of them saved up.
                    "Life is a long song" Jethro Tull

                    Comment

                    • #11
                      bumpo628
                      Senior Member
                      • Nov 2009
                      • 1142

                      I just spoke with the owner of the Philips Wholesale reloading store in Covina about the cheapy wal-mart style hulls. He said that they should not be reloaded more than once or twice. The risk of the base wad coming loose and causing a kB is just too great after that. It makes much more sense to buy some quality hulls so that you don't have to worry about it.
                      Ronald Reagan once said that the most terrifying words in the English language are: "I'm from the government and I'm here to help".
                      Download my alloy calculator here: http://castboolits.gunloads.com/showthread.php?t=105952

                      Comment

                      Working...
                      UA-8071174-1