Unconfigured Ad Widget

Collapse

Looking for Local Help Reloading - Irvine

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • iareConfusE
    Veteran Member
    • Jan 2010
    • 4464

    Looking for Local Help Reloading - Irvine

    Hey guys,

    I'm getting back into reloading after having tried once and giving up. This time I want to be sure that I'm doing it right, so I am asking for anybody that has some spare time to help me set up my Lee Pro 1000 Progressive when it arrives at my home some time next week. I'm going to be reloading for pistol cartridges, just 9mm to start with. I don't want to miss anything and make any potentially dangerous mistakes. I've tried my hand at this once and failed miserably.

    I'll offer food and drink to anybody that is experienced with this particular press or at least reloading in general. I should have all the parts that I need to start reloading. I'll be picking up primers and powder on the 3rd of January when I go to Turners to pick up a couple guns.

    If anybody would like to kindly offer their spare time to help a newbie out, I'd greatly appreciate it. Please PM me if you're able to help! I live in Irvine and am usually available Mon, Thurs, and Friday unless I get called in to cover a shift.

    Thanks for any help offered!
  • #2
    f4tweet
    Senior Member
    • Oct 2005
    • 2022

    Have you read the ABC's of Reloading, and the NRA Reloading book?

    Comment

    • #3
      BigBronco also not a Cabinetguy
      Calguns Addict
      • Jul 2009
      • 7084

      I am in Garden Grove. I have Mondays off usually. Not familiar with Lee gear but have been loading a long time.
      "Life is a long song" Jethro Tull

      Comment

      • #4
        iareConfusE
        Veteran Member
        • Jan 2010
        • 4464

        Originally posted by f4tweet
        Have you read the ABC's of Reloading, and the NRA Reloading book?
        I've tried reloading before so I understand the basics. I just need to be 100% sure that I have my gear set up properly so I don't blow my hands up


        Originally posted by BigBronco
        I am in Garden Grove. I have Mondays off usually. Not familiar with Lee gear but have been loading a long time.
        Does that mean you're willing to stop by and give me a hand?

        Comment

        • #5
          f4tweet
          Senior Member
          • Oct 2005
          • 2022

          I've tried reloading before so I understand the basics. I just need to be 100% sure that I have my gear set up properly so I don't blow my hands up

          Good mindset.

          Comment

          • #6
            Whiterabbit
            Calguns Addict
            • Oct 2010
            • 7602

            Turners around Irvine? There's another shop just down the street not one mile that has a TON of reloading stuff by comparison. I'd check it out if you need product. Can't comment on pricing or if they stock exactly what you are looking for, but I liked them much better than Turners (Turners wasn't bad at all, great people, I just liked this other place more.)

            was called the fowler gun room.

            Comment

            • #7
              iareConfusE
              Veteran Member
              • Jan 2010
              • 4464

              I've been to Fowlers. There isn't a Turners in Irvine, but the one I'm going to is in Chino Hills, becase that's where two of my guns are waiting for me for the 10 day jail time.

              Comment

              • #8
                maschronic
                Veteran Member
                • Apr 2006
                • 4388

                i'm not too familiar with the Lee press, but i can give you a hand when you get it setup. i have 2 dillon 550's and learned how to put it together from youtube.
                I am offically a gun nut!!!!!

                Comment

                • #9
                  Kerplow
                  Calguns Addict
                  • Dec 2009
                  • 8875

                  how did you fail miserably in your first attempt?

                  the rest of us noobs need to know these things so we dont have the same problems!
                  Originally posted by MelvinoelGreat**
                  My friend, your Chargers sure are looking good tonight. They are only losing by 14 at the half, not to bad my friend.

                  Comment

                  • #10
                    iareConfusE
                    Veteran Member
                    • Jan 2010
                    • 4464

                    Originally posted by maschronic
                    i'm not too familiar with the Lee press, but i can give you a hand when you get it setup. i have 2 dillon 550's and learned how to put it together from youtube.
                    Thanks. I've already got an offer from BigBronco, but you're more than welcome to join him and school me on reloading if you'd like. The more help I can get, the less likely I am to blow my hands off

                    Originally posted by Kerplow
                    how did you fail miserably in your first attempt?

                    the rest of us noobs need to know these things so we dont have the same problems!
                    I don't know, that's exactly why I was discouraged and stopped doing it. I thought I was doing everything correctly. I was purposely going OCD during the process so that I could pay attention to every little detail and not screw up. I couldn't find out what I was doing wrong after two different trials so I just got discouraged and stopped. I'm sure that if I knew what I was doing wrong I could have easily corrected it and moved on.

                    Comment

                    • #11
                      PutTogether
                      Senior Member
                      • Sep 2008
                      • 2370

                      Good thinking BTW, wanting to be careful, and soliciting help.

                      Do you have a solid bench to mount it to?

                      I've never put a Lee together, (I have a Dillion and it came mostly assembled), but I can give you some plans for an AWESOME portable bench. Might even be able to help put it together.
                      sigpic

                      Comment

                      • #12
                        Markus
                        Senior Member
                        • Mar 2010
                        • 1762

                        Originally posted by PutTogether
                        Good thinking BTW, wanting to be careful, and soliciting help.

                        Do you have a solid bench to mount it to?

                        I've never put a Lee together, (I have a Dillion and it came mostly assembled), but I can give you some plans for an AWESOME portable bench. Might even be able to help put it together.
                        I think wed all like to hear about the awesome portable bench.

                        Comment

                        • #13
                          iareConfusE
                          Veteran Member
                          • Jan 2010
                          • 4464

                          Originally posted by PutTogether
                          Good thinking BTW, wanting to be careful, and soliciting help.

                          Do you have a solid bench to mount it to?

                          I've never put a Lee together, (I have a Dillion and it came mostly assembled), but I can give you some plans for an AWESOME portable bench. Might even be able to help put it together.
                          I don't have a super sturdy bench. I put together a primitive workbench for my garage (This won't be a permanent residence so a heavy duty work bench isn't necessary). The workbench is just a plywood sheet bolted to some 2x4's reinforced with skirts. I plan on drilling holes into the table and bolting the press directly onto it. It should be solid enough for what I'm doing. I've reloaded some failed rifle rounds on an even flimsier and more janky set up than this. Thanks for the offer.

                          Comment

                          • #14
                            maschronic
                            Veteran Member
                            • Apr 2006
                            • 4388

                            if timing works out, then i might have to stop by and check it out.
                            I am offically a gun nut!!!!!

                            Comment

                            • #15
                              PutTogether
                              Senior Member
                              • Sep 2008
                              • 2370

                              Originally posted by Markus
                              I think wed all like to hear about the awesome portable bench.
                              Ok, just in case anyone wants to see.

                              Ingredients:

                              1 Black and Decker "workmate"

                              1 piece of 2x12, cut to 24" long

                              1 piece of 1x1, cut to 24" long

                              8 wood screws

                              2 4" C-Clamps.



                              Assemble the Black and Decker workmate. (which by the way, is a really useful little tool with it's built in grabbers and stuff.)

                              You'll notice that the top of the workmate is two seperate pieces of wood that can be clamped together by working the cranks on either side of the table. Many people bolt a press to just those pieces of wood, but I found it works quite a bit better to fabricate a second top.

                              Take the 1"x1" piece of wood, and lay it parralell on top of the 2x12. Leave 1" of space on one side, and 10" of space on the other. The side of the 2x12 that has the strip of 1x1 on it will be the bottom. Hold the two pieces of wood together with the c-clamps, and flip it all over. Screw them together from the top side, and remove the clamps. You'll now have a 2x12 tabletop, with a a strip of wood beneath it, leaving a small lip on the back, and a large overhang on the front.

                              Set this piece you've made on top of the workmate. Seperate the halves of the workmate top, so that the piece of 1x1 goes between them. Have the short half of the 2x12 go toward the back, the long half toward you.

                              Clamp the halves of the workmate down TIGHT onto the 1x1. This will keep the back half of your table top sturdy. Use the C-clamps to clamp down the longer side of the 2x12 to front half of the workmate, securing the rest of it.

                              Mount reloading press to the overhand of the 2x12.

                              You now have a sturdy top added on to the portable bench. It is held in place from all sides, but can be easily taken off if you need to move your setup around, or use the workmate bench for other tasks.

                              This works very well because the workmate takes up almost no room, but still has a wide stance and doesn't rock back and forth. If you mount your press off to one side, it still leaves quite a bit of table space, and you still have the back half of the workmate's top as a kind of shelf.

                              Pics:





                              In this one, you can clearly see the 2x12 is the top layer, and the 1x1 being grasped by the split top of the workmate.

                              sigpic

                              Comment

                              Working...
                              UA-8071174-1