Unconfigured Ad Widget

Collapse

Rainier Bullets and Reloading

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mlancaster
    Member
    • Nov 2009
    • 196

    Rainier Bullets and Reloading

    Hey All,

    Im new to reloading and bought some bullets kinda cheap they are .40 180gr made by Rainier. Per Rainier these bullets should be loaded to lead bullet specs. even though they are FMJ. However, I cannot find a 180 gr lead bullet load data for any powder out there for .40-180gr only for 185gr bullets. I dont want to overcharge and blow up or undercharge and get a bullet stuck in the barrel...how do i load this are there any of you reloadig folks outh there that can help me.....i know reloading can be dangerous if not done correctly....i dont want to screw it up....please help
    Putting Oil in your barrel won't make the bullets come out any faster
  • #2
    Oceanbob
    I need a LIFE!!
    • Jun 2010
    • 12721

    Lead data

    First off Rainier bullets are not Jacketed. They are plated. Looking at my Lyman #49 Reloading Handbook under 10MM (which I load)..I can see plenty of recipes for 175 Grain Lead (alloy). Not 180 certainly but close enough that you could back off a bit and work up a good load.

    What powder are you using...and .40 or 10mm?
    May the Bridges I burn light the way.

    Life Is Not About Waiting For The Storm To Pass - Its About Learning To Dance In The Rain.

    Fewer people are killed with all rifles each year (323 in 2011) than with shotguns (356), hammers and clubs (496), and hands and feet (728).

    Comment

    • #3
      Oceanbob
      I need a LIFE!!
      • Jun 2010
      • 12721

      Some further research

      Shows that our own CHIEF-7700 ( a great resource) posted an obsolete Rainier Data sheet as a PDF file on another forum. You will have to register on the forum to read the file;but you will find the info you seek.

      SCROLL down to post #21 for Chief-7700 info.

      May the Bridges I burn light the way.

      Life Is Not About Waiting For The Storm To Pass - Its About Learning To Dance In The Rain.

      Fewer people are killed with all rifles each year (323 in 2011) than with shotguns (356), hammers and clubs (496), and hands and feet (728).

      Comment

      • #4
        Bill Steele
        Calguns Addict
        • Sep 2010
        • 5028

        Lots of loads.

        Originally posted by mlancaster
        Hey All,

        Im new to reloading and bought some bullets kinda cheap they are .40 180gr made by Rainier. Per Rainier these bullets should be loaded to lead bullet specs. even though they are FMJ. However, I cannot find a 180 gr lead bullet load data for any powder out there for .40-180gr only for 185gr bullets. I dont want to overcharge and blow up or undercharge and get a bullet stuck in the barrel...how do i load this are there any of you reloadig folks outh there that can help me.....i know reloading can be dangerous if not done correctly....i dont want to screw it up....please help
        Looking at my Lee book, there are 8 different brand powders with loads for 180 gr. .40 S&W bullets in lead and copper plated.

        What powder do you favor?
        When asked what qualities he most valued in his generals, Napoleon said, "give me lucky ones."

        Comment

        • #5
          mlancaster
          Member
          • Nov 2009
          • 196

          Originally posted by Bill Steele
          Looking at my Lee book, there are 8 different brand powders with loads for 180 gr. .40 S&W bullets in lead and copper plated.

          What powder do you favor?
          Which Lee book do you have?
          Putting Oil in your barrel won't make the bullets come out any faster

          Comment

          • #6
            Bill Steele
            Calguns Addict
            • Sep 2010
            • 5028

            Lee Book Ed 2.

            Originally posted by mlancaster
            Which Lee book do you have?
            I have the second edition, it has loads for the Lead/Plated 180's for Accurate (9.5.7,2), Universal, Power Pistol, Unique, Amer-Select, etc.

            If you have one of those powders already, I can post what the book says.
            Last edited by Bill Steele; 12-27-2010, 1:49 PM.
            When asked what qualities he most valued in his generals, Napoleon said, "give me lucky ones."

            Comment

            • #7
              mlancaster
              Member
              • Nov 2009
              • 196

              Originally posted by Bill Steele
              I have the second edition, it has loads for the Lead/Plated 180's for Accurate (9.5.7,2), Universal, Power Pistol, Unique, Amer-Select, etc.

              If you have one of those powders already, I can post what the book says.
              unique would be good....my local shop has that powder
              Putting Oil in your barrel won't make the bullets come out any faster

              Comment

              • #8
                Bill Steele
                Calguns Addict
                • Sep 2010
                • 5028

                Unique load in Lee book.

                Originally posted by mlancaster
                unique would be good....my local shop has that powder
                OK, the .40 S&W, Unique load for a 180 gr. lead bullet in Lee Second Edition reads as follows:

                Start: 5.2gr - 919fps, Max: 5.5 gr - 973fps, Min. OAL - 1.125
                Last edited by Bill Steele; 12-27-2010, 2:25 PM.
                When asked what qualities he most valued in his generals, Napoleon said, "give me lucky ones."

                Comment

                • #9
                  Chief-7700
                  Veteran Member
                  • May 2008
                  • 3382

                  A blast from the past.
                  Attached Files

                  XL-650 to feed the: .45ACP's Les Baer Concept V, Ruger SR 1911, Ruger Nightwatchman,custom built Colt M1911, Springfield .45ACP Loaded.. 9MM SA Range Officer,Ruger P-85, Springfield Stainless 9MM loaded, SA 9MM 5.25" XDM, Springfield 9mm Stainless Range Officer, STI double stack .45ACP.
                  IDPA A41750 Safety Officer
                  NRA Certified RSO
                  "Stay out of the deep end of the pool; correct the problem with your credit card, not your dremel!"

                  Comment

                  • #10
                    stormvet
                    I need a LIFE!!
                    • Mar 2010
                    • 12681

                    I have used Rainier plated bullets for a long time, they are my favorite low cost training bullets. I like them more then Barry's. I have loaded and shot thousands of Rainier bullets in 9mm, .40 and .45 without any problems. They are plated not jacketed but I shoot them out of Glocks and Kahrs with no problems, I do clean all my weapons after each range outing though so there is no chance of lead build up. The last 180g Rainier I reloaded was 4.8g of W231 with a COL of 1.125.
                    Im a warmonger baby, I got blood in my eyes and I'm looking at you.

                    Comment

                    • #11
                      mlancaster
                      Member
                      • Nov 2009
                      • 196

                      thx all....im gonna pick up that lee book pretty soon.


                      I was interested in loading up 45 and 9 too does the book have that data as well?
                      Putting Oil in your barrel won't make the bullets come out any faster

                      Comment

                      • #12
                        Triple R Munitions
                        Banned
                        • Jun 2009
                        • 1004

                        even though the projo's are plated, you can still load them "hotter" then a lead load....i run 40sw at 4.3gr of TITEGROUP at around 1050 fps. my 9mm plated is at 1150 fps at 4.3gr of tite. and 45 is 810fps at 4.9gr of tite.

                        hornaday/sierra manual is good too...

                        R

                        Comment

                        • #13
                          Corbin Dallas
                          CGN/CGSSA Contributor - Lifetime
                          CGN Contributor - Lifetime
                          • May 2006
                          • 6458

                          Originally posted by mlancaster
                          unique would be good....my local shop has that powder
                          I run Unique @ 5.5g with a OAL of 1.125 under a 180g Bear Creak Moly coated lead.


                          These chrono at 870 out of my G23
                          NRA Life Member and Certified Instructor: Pistol - Rifle - Shotgun - PPITH - PPOTH - NRA Certified RSO

                          WTB the following - in San Diego
                          --Steyr M357A1 357SIG
                          --Five Seven IOM (round trigger guard)

                          Never forget - השואה... לעולם לא עוד.

                          Comment

                          • #14
                            Bill Steele
                            Calguns Addict
                            • Sep 2010
                            • 5028

                            Originally posted by mlancaster
                            thx all....im gonna pick up that lee book pretty soon.


                            I was interested in loading up 45 and 9 too does the book have that data as well?
                            Sure, on the 9mm there are fewer Unique loads, so if you have not bought the bullets yet, I can tell you the bullets that have Unique loads in 9 (in the Lee book). The .45 ACP has a lot more Unique loads, but again some bullets are not listed with Unique.

                            The best way is to get a couple of books (I like Lee as he puts the volume and pressure in as well as the weight and has a lot of loads, Lyman is also good), some have loads others don't and on the loads that are dups, you get to double check for typo's.
                            When asked what qualities he most valued in his generals, Napoleon said, "give me lucky ones."

                            Comment

                            • #15
                              spoolnaround
                              Junior Member
                              • Dec 2008
                              • 19

                              .40
                              155 gr Rainer RS
                              6gr Power Pistol

                              Good accurate load out of my G-23.

                              Comment

                              Working...
                              UA-8071174-1