Unconfigured Ad Widget

Collapse

RE: 1050

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • lazuris
    Senior Member
    • Oct 2006
    • 588

    RE: 1050

    I just picked up a 1050 and finished setting it up. Absolutly the best press ever. However i'm thinking about taking it up a notch. Does anyone have the Mr. Bullet feeder or the GSI feeder. I'm wondering on what you think about the setup or any quirks that they may have. I'm looking for .223 and .308 use.
  • #2
    joelogic
    Calguns Addict
    • May 2008
    • 6597

    You are lucky to be able to drop that much coin.
    Micro/Mini Reflex Red Dot Sight Mount for the M1, M1a/M14 platform

    Comment

    • #3
      Sheldon
      Senior Member
      • Oct 2005
      • 2149

      Have a 1050 as well, but don't have any bullet feeder. I have not read of any issues with them though, other than using lead bullets in them. I recall they all recommend jacketed bullets only, I guess due to feed reliability with lead bullets. I shoot mostly lead myself, except for rifle loads.

      Comment

      • #4
        TMC
        Senior Member
        • Oct 2005
        • 2348

        I have the K.I.S.S. feeder on my 1050 and its fantastic. Fill it with 500 bullets go, the thing that slows you down is trying to keep the primer tube full. I can load about 2,000 9mm per hour.

        That said I wouldn't spend the money on a bullet feeder for rifle. While it works it doesn't save time because you cann't run the press fast with rifle rounds, if you do you'll have power all over the place. You need to go slow and dwell slightly when the handle is down so the powder has time to fall into the case. You can go quick when you're dropping 4 grains into a pistol case but you need to give 25+ grains time to get into a rifle case.

        Just me .02

        Originally posted by Sheldon
        Have a 1050 as well, but don't have any bullet feeder. I have not read of any issues with them though, other than using lead bullets in them. I recall they all recommend jacketed bullets only, I guess due to feed reliability with lead bullets. I shoot mostly lead myself, except for rifle loads.
        I've loaded throusands of Bear Creek lead bullets in mine without any problem.
        Last edited by TMC; 11-04-2010, 9:10 AM.
        where are my pistol mags?

        Comment

        • #5
          Sheldon
          Senior Member
          • Oct 2005
          • 2149

          [QUOTE=I've loaded throusands of Bear Creek lead bullets in mine without any problem.[/QUOTE]


          Good to know.....tempted now.

          Comment

          • #6
            lazuris
            Senior Member
            • Oct 2006
            • 588

            You are lucky to be able to drop that much coin.
            Its not luck. I work 6 days a week in my own business. I spend my money wisely and have no debts. Luck has nothing to do with hard work.

            Comment

            • #7
              EL_NinO619
              Senior Member
              • Sep 2010
              • 1519

              Originally posted by lazuris
              Its not luck. I work 6 days a week in my own business. I spend my money wisely and have no debts. Luck has nothing to do with hard work.
              I don't think he meant it like that. He was just saying you are fortunate right now. A lot of people work hard and still can't afford that, and a lot of people are out of work. I hope to get one soon. Post some pics!!
              se carga el diablo de la pistola...
              .223, .25acp, 25-20win, 9mm, 38spl/.357, 10mm .308, 8mm M, 7mm Rem Mag, 45acp, .475 Wildey mag
              On 2 Hornady LnL AP & Dillon Super 1050

              Comment

              Working...
              UA-8071174-1