Unconfigured Ad Widget

Collapse

7mm mag reloading question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • geo5120
    Member
    • Aug 2006
    • 327

    7mm mag reloading question

    any idea as to how many times the brass can be reloaded? after second time, some of the cases get stuck in the chamber. the die doesnt resize the belted area at the case head so am thinking the problem may be in that area.
    "NEVER APOLOGIZE FOR BEING PATRIOTIC" Toby Keith 8/31/07 The Big Dog Daddy Tour
  • #2
    swifty
    Senior Member
    • Mar 2008
    • 929

    If the cases are sticking in the chamber; check the case length, also make sure your powder charge is correct. The case and the chamber needs to be clean also.

    Comment

    • #3
      toby
      Banned
      • Jan 2010
      • 10576

      Check your powder charges may be a little hot? and on case life all will vary I just loaded some 22-250's for the 14th time and I load them max.

      Comment

      • #4
        RobG
        Veteran Member
        • Dec 2006
        • 4887

        Are you bumping back the shoulder? Full length or neck sizing? Are you checking case length? I get 8-9 loadings in mine before the primer pockets are too loose. I run a tad hot at 67 grains of R22 with 162 grain Amax. I never have any sticking on extraction, FL size every time with about .005 shoulder bump.

        Comment

        • #5
          Southpaw45
          Senior Member
          • Sep 2008
          • 2333

          A buddy of min is having the same problem with his Remington 700 in 7mm but hes having difficulting closing the bolt on a live round. Are you having problems closing the bolt on a live round or difficulties opening the bolt after firing?
          Cowboy Action Shooter
          Midnight Black Powder Shooter
          S.A.S.S #74217
          Have Guns Will Travel
          .45 Colt Enthusiast
          ΜΟΛΩΝ ΛΑΒΕ

          Comment

          • #6
            RobG
            Veteran Member
            • Dec 2006
            • 4887

            Originally posted by Southpaw45
            A buddy of min is having the same problem with his Remington 700 in 7mm but hes having difficulting closing the bolt on a live round. Are you having problems closing the bolt on a live round or difficulties opening the bolt after firing?
            If he is reloading? Is this new or fired brass? If its fired he needs to bump the shoulder back until there is no resistance when closing the bolt.

            Comment

            • #7
              Southpaw45
              Senior Member
              • Sep 2008
              • 2333

              He using using fired brass. I will pass on the info. Thanks robG
              Cowboy Action Shooter
              Midnight Black Powder Shooter
              S.A.S.S #74217
              Have Guns Will Travel
              .45 Colt Enthusiast
              ΜΟΛΩΝ ΛΑΒΕ

              Comment

              Working...
              UA-8071174-1