Request: Hornady Reloading Manual data for 9mm and .45acp XTP

[DOHCtah]

Hi guys,

Was wondering if any of you guys who owns a copy of the Hornady Reloading Manual could do me a favor? I recently obtained a BUNCH of Hornady XTP bullets in 9mm and 45acp. My Lyman book doesn't cover much of the XTPs, plus any that it does cover I would like to cross-check with Hornady's own book.

Was wondering if anyone could post the recommended COAL from the Hornady manual. These are the ones I need:

9mm:
115gr XTP
124gr XTP
147gr XTP

.45acp:
185gr XTP
200gr XTP
230gr XTP

Again, looking for data from the Hornady Reloading Manual (not Lyman, not Sierra, not internet, not your own homemade recipe lol). Thanks guys!

[at_liberty]

Taken directly from my copy:

9mm:

• 115gr XTP - 1.075
• 124gr XTP - 1.060
• 147gr XTP - 1.100

.45acp:

• 185gr XTP - 1.230
• 200gr XTP - 1.230
• 230gr XTP - 1.230

[DOHCtah]

thanks at_liberty! you rock.

My Lyman lists the 45acp 185gr XTP at 1.175! That's a hell of a difference between the 1.230 listed in Hornady. Most likely the recommended powder charges are different for the two manuals.

[DOHCtah]

Hmm.. this might be asking a little bit too much.. but is there anyway someone can share some of the powder load data listed in the book? Something along the lines of taking a quick picture or a scan?

PM me if you can help me out, I would really appreciate it.

[Gryff]

Hmm.. this might be asking a little bit too much.. but is there anyway someone can share some of the powder load data listed in the book? Something along the lines of taking a quick picture or a scan?

PM me if you can help me out, I would really appreciate it.

Just be careful not to post it here. That's copyrighted material and Calguns could get in trouble for having it on the site.

[J-cat]

Posting load data does not violate the copyright.

[Ross]

Posting load data does not violate the copyright.

But posting pictures/scans of the manual might be is a violation.

[J-cat]

True, but we're not doing that.

[pdq_wizzard]

what powders ? I don't want to type all the loads.