Unconfigured Ad Widget

Collapse

corrosive ammo

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • big ron
    Senior Member
    • Jan 2010
    • 848

    corrosive ammo

    what does it do to a fire arm? sorry for the dumb question, I have never used it and just thought I would ask
  • #2
    paul0660
    In Memoriam
    • Jul 2007
    • 15669

    Corrosive means salt from the primer, so if you don't clean it, moisture in the air will cause rust.
    *REMOVE THIS PART BEFORE POSTING*

    Comment

    • #3
      GMG
      Calguns Addict
      • Dec 2008
      • 7974

      Be sure to douse all interanls with Windex after shooting! (before leaving the range or where ever)

      Then clean normally.
      sigpic

      A member of The Tonkin Gulf Yacht Club

      Comment

      • #4
        big ron
        Senior Member
        • Jan 2010
        • 848

        what does the windex do?

        Comment

        • #5
          Mssr. Eleganté
          Blue Blaze Irregular
          CGN Contributor - Lifetime
          • Oct 2005
          • 10401

          Originally posted by big ron
          what does the windex do?
          Windex is mostly water, and water is what you need to flush out the corrosive salts that are left by the primers. Regular gun cleaning solvents can't dissolve the salts. Windex also has detergent to help clean powder fouling and ammonia to remove copper fouling. But using plain hot water in addition to your regular cleaning routine also works.
          __________________

          "Knowledge is power... For REAL!" - Jack Austin

          Comment

          • #6
            FLIGHT762
            Veteran Member
            • Mar 2009
            • 3072

            Windex is mostly water, and water is what you need to flush out the corrosive salts that are left by the primers. Regular gun cleaning solvents can't dissolve the salts. Windex also has detergent to help clean powder fouling and ammonia to remove copper fouling. But using plain hot water in addition to your regular cleaning routine also works.

            This ^^^^^^^^^^^^^^^^^

            Scrub the parts(with a toothbrush) with powder fouling on it with the Windex. Also run a couple of Windex soaked patches down the bore. Dry all the parts and bore off and clean as usual with your normal solvents and oil afterward. Check the gun a day or two after cleaning to be sure you got all of the salts off.

            Normal petroleum based solvents DO NOT get the salts off. Water based products do. And it is not the ammonia in Windex that neutralize the salts, It's the water and detergent in it.

            Comment

            Working...
            UA-8071174-1