Unconfigured Ad Widget

Collapse

Lee Precision Rave

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • stewiegriffin
    Member
    • Jan 2010
    • 227

    Lee Precision Rave

    Earlier this year, my brother gave me an old Lee Pro 1000 press, set up for .357. The press was missing some parts like the cartridge feed tubes, parts for the powder dispenser, etc. I contacted Lee, and asked them if they could rebuild it and set it up for .223. I got a response from them the next morning asking me to send it in and they would take care of it.

    A week and a half later the press shows up rebuilt and ready to roll. New cartridge feed tubes, "updated" auto disk powder dispenser, correct shell holder assembly, new set of instructions for auto disk and the press, and .223 dies already mounted on the turret plate. They even included the die storage box which had a shell holder and powder scoop inside of it. There was a short handwritten note that listed everything they did to the press, with the nicest words written "FREE OF CHARGE."

    I couldn't believe it, but I do understand. I know people will argue between green, orange, red, and blue presses, but Lee got a customer for life out of me. I'm sure that's what their intentions are when providing such excellent customer service. I was and still am impressed.

    Without starting a new thread, the primer feed system is lacking, though.
    sigpic
  • #2
    Chief-7700
    Veteran Member
    • May 2008
    • 3382

    That is how good Companies keep loyal customers. I happen to like Blue.

    XL-650 to feed the: .45ACP's Les Baer Concept V, Ruger SR 1911, Ruger Nightwatchman,custom built Colt M1911, Springfield .45ACP Loaded.. 9MM SA Range Officer,Ruger P-85, Springfield Stainless 9MM loaded, SA 9MM 5.25" XDM, Springfield 9mm Stainless Range Officer, STI double stack .45ACP.
    IDPA A41750 Safety Officer
    NRA Certified RSO
    "Stay out of the deep end of the pool; correct the problem with your credit card, not your dremel!"

    Comment

    • #3
      spencerhut
      CGN/CGSSA Contributor - Lifetime
      CGN Contributor - Lifetime
      • Oct 2006
      • 1264

      Richard Lee is a good person. I think he is a big reason we have affordable reloading equipment from a lot of companies today. His company helps a lot of people get into into reloading and create great ammo for a very modest investment.

      Very glad the hooked you up! I'm even happier you past along the good deed for others to know. Make sure you pay it forward some day.
      www.spencersfirearms.com
      14402 Hwy 41, Madera 93636
      Mon-Fri 10AM to 6PM
      Sat 10AM to 5PM
      559-822-4369
      I am a US Marine, an active shooter, lifetime NRA, USPSA, ICORE & Calguns member and I own a gun store.
      Living the Dream 24x7

      Comment

      • #4
        stewiegriffin
        Member
        • Jan 2010
        • 227

        Originally posted by spencerhut
        Make sure you pay it forward some day.
        Will do!
        sigpic

        Comment

        • #5
          ireload
          Veteran Member
          • Aug 2009
          • 2589

          I've started out with Lee hand press. Used it for several years before jumping to a RCBS bench mounted press. I never had any issue with Lee products.

          Comment

          • #6
            mnguyen84
            Senior Member
            • May 2010
            • 1132

            i just bought a Lee's kit. i'm content with it. i'm was just annoyed that their stuff had a lot of metal debris left over from being machined. i had to clean them with brake/choke cleaner and re-lube them.

            Comment

            • #7
              Memnok
              Junior Member
              • Mar 2009
              • 52

              I have both the Lee Breech Lock Challenger, and a RCBS Rockchucker press. Everyone seems to think the RCBS is a better press, but I seem to use the Lee about 90% of the time. Nothing wrong with Lee.
              Clint
              ----------------------------------


              Good government is no substitute for self-government. Mahatma Gandhi

              That government is best which governs least, because its people discipline themselves. - Thomas Jefferson

              Comment

              • #8
                Divernhunter
                Calguns Addict
                • May 2010
                • 8753

                I am surprised. My expierence(and a friends) with lee was very different and it was warr stuff mostly. Never had a problem with RCBS or Hornady. Have not contacted others as of yet so I cannot say about them.
                A 30cal will reach out and touch them. A 50cal will kick their butt.
                NRA Life Member, NRA certified RSO & Basic Pistol Instructor, Hunter, shooter, reloader
                SCI, Manteca Sportsmen Club, Coalinga Rifle Club, Escalon Sportsmans Club, Waterford Sportsman Club & NAHA Member, Madison Society member

                Comment

                • #9
                  at_liberty
                  Senior Member
                  • Jun 2010
                  • 699

                  Originally posted by stewiegriffin
                  Earlier this year, my brother gave me an old Lee Pro 1000 press, set up for .357. The press was missing some parts like the cartridge feed tubes, parts for the powder dispenser, etc. I contacted Lee, and asked them if they could rebuild it and set it up for .223. I got a response from them the next morning asking me to send it in and they would take care of it.

                  A week and a half later the press shows up rebuilt and ready to roll. New cartridge feed tubes, "updated" auto disk powder dispenser, correct shell holder assembly, new set of instructions for auto disk and the press, and .223 dies already mounted on the turret plate. They even included the die storage box which had a shell holder and powder scoop inside of it. There was a short handwritten note that listed everything they did to the press, with the nicest words written "FREE OF CHARGE."

                  I couldn't believe it, but I do understand. I know people will argue between green, orange, red, and blue presses, but Lee got a customer for life out of me. I'm sure that's what their intentions are when providing such excellent customer service. I was and still am impressed.

                  Without starting a new thread, the primer feed system is lacking, though.
                  First let me say that my equipment is all red. I would own other colors if I thought the cost was justified and if they offered case and bullet feeding as cheaply as Lee. If someone would like to give me blue or green as a gift, I don't doubt that I would love it.

                  Now, on to my real comments about your post.

                  Good luck with your Pro1000. I do well with mine but do a factory crimp as a final operation on a single stage.

                  My main comment is that one of the arguments all the Dillon dogs use is the "no BS warranty" thing. It is wonderful that Lee did that work and didn't charge you for it, but we don't pay Dillon prices and don't give Lee enough money to do service and send parts for free. It should not be expected, or prices will go up. I am just saying this free-of-charge thing should not be an expectation. Lee is doing fine the way they are. I will say the prices for repair parts bought directly from them are pretty scary, so I try to get as much as I can from one of the main dealers like Midway, Natchez, and Graf. One exception is those little springs that hold cases in place on the shellplate. They need replacement because of me, not by any fault in the machine, aside from it being easy to mess up. The slightest overtightening, and the thing is toast. Other machines (colors) have their "maintenance kits" too.

                  Finally, your parting comment about the priming system begs more discussion, and you know it. What that system lacks is a way to shut it off while the thing is full up into the tray. I can jam something in the chute but don't think I could manage with this machine without my hemostats or a pair of tweezers for picking out remaining primers. I found that once I understood the machine and everything that could go wrong, I do a pretty good job of juggling all the factors and keeping it running without cursing. You fall off the horse and then get back up on it. You don't need a blue horse.
                  Last edited by at_liberty; 07-25-2010, 7:33 AM.

                  Comment

                  • #10
                    spencerhut
                    CGN/CGSSA Contributor - Lifetime
                    CGN Contributor - Lifetime
                    • Oct 2006
                    • 1264

                    Originally posted by Alex Smth
                    I broke an "unbreakable" decapping pin and had another shipped free of charge when I called Lee the next day. Lee is a great company to deal with.

                    I should mention that breaking the pin was my fault as I later realized I had tried to decap a military brass with a crimped in primer. I checked and I had several others that it had punched out before finally breaking. Check all your brass carefully.
                    I use a Lee decapping die and an RCBS Heavy Duty decapping die for all my primer duties. What I love about the Lee is the tension nut. You crank that thing down hard and it will punch out most primers pretty easy. But it does sometimes get pushed out with heavily crimped or berdan primed brass. On the other hand, the RCBS HD Decapping Die pin snaps off since it has no way to give. But with the Lee, as long as I know I'm decapping a boxer primed brass, I just tap the Lee Decapping pin in with a small hammer until the primer comes out. Wonderful produce, very inexpensive.
                    www.spencersfirearms.com
                    14402 Hwy 41, Madera 93636
                    Mon-Fri 10AM to 6PM
                    Sat 10AM to 5PM
                    559-822-4369
                    I am a US Marine, an active shooter, lifetime NRA, USPSA, ICORE & Calguns member and I own a gun store.
                    Living the Dream 24x7

                    Comment

                    • #11
                      gorblimey
                      Senior Member
                      • Jun 2007
                      • 1522

                      Originally posted by ireload
                      I've started out with Lee hand press. Used it for several years before jumping to a RCBS bench mounted press. I never had any issue with Lee products.

                      I find the hand press very useful, and good relaxation/exercise at the laptop while waiting for computing tasks to complete (telecommuting).

                      Comment

                      • #12
                        brianinca
                        Member
                        • May 2010
                        • 359

                        Can I ask if this is the older Pro1000 with the square powder hopper?

                        Good info, I have a ton of Lee Milsurp dies but I'm still working up the courage/looking for the time to get started with the Pro1000.

                        Regards,
                        Brian in CA

                        Comment

                        • #13
                          Cowboy T
                          Calguns Addict
                          • Mar 2010
                          • 5725

                          I have to agree with the kudos to Lee Precision. All of my gear, except for my tumbler (Frankford Arsenal) and scale (RCBS 10-10) are red and say "LEE" on 'em. They make good gear that is affordable to average Joes like most of us.

                          Now, the priming system comment. I happen to be well schooled in that priming system, having disassembled and reassembled my Pro 1000's on multiple occasions. So, I've learned how they work. From experience, I can tell you, they work just fine.

                          The key to making the priming system work is to clean it THOROUGHLY. Clean it with some solvent (I use WD-40) and a toothbrush. Follow this by washing it with warm, soapy water and a toothbrush. Dry it as well as you can by hand (I use a paper towel). Then let it dry completely, preferably overnight.

                          Here's a set of videos on how to keep a Pro 1000, including the priming system, very happy.

                          "San Francisco Liberal With A Gun"
                          F***ing with people's heads, one gun show at a time. Hallelujah!
                          http://www.sanfranciscoliberalwithagun.com (reloading info w/ videos)
                          http://www.liberalsguncorner.com (podcast)
                          http://www.youtube.com/sfliberal (YouTube channel)
                          ----------------------------------------------------
                          To be a true Liberal, you must be 100% pro-Second Amendment. Anything less is inconsistent with liberalism.

                          Comment

                          • #14
                            stewiegriffin
                            Member
                            • Jan 2010
                            • 227

                            Originally posted by brianinca
                            Can I ask if this is the older Pro1000 with the square powder hopper?\
                            It WAS, but Lee returned it with the newer circle powder hopper..
                            sigpic

                            Comment

                            Working...
                            UA-8071174-1