Unconfigured Ad Widget

Collapse

45 auto CCI Blazer FMJ?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • oskg21
    Junior Member
    • May 2010
    • 11

    45 auto CCI Blazer FMJ?

    I have a Glock 21 & was wondering if CCI Blazer aluminum cartridge is fine to shoot?
    I usually use Federal & Winchester without any problems.
    Thanks
    Glock 21 Gen 2
    Baretta 92S
    Sig Pro SP2022 9mm
    Sig P230
    Hipoint 995TS 9mm Carbine
    Hatsan Escort MP Tac Shotgun
  • #2
    Chief-7700
    Veteran Member
    • May 2008
    • 3382

    Originally posted by oskg21
    I have a Glock 21 & was wondering if CCI Blazer aluminum cartridge is fine to shoot?
    I usually use Federal & Winchester without any problems.
    Thanks
    You should not have any problems using the ammo in your Glock. Only thing is please pick up the fired aluminum cases and throw them away, since they are bergan primed and can not be reoladed.

    XL-650 to feed the: .45ACP's Les Baer Concept V, Ruger SR 1911, Ruger Nightwatchman,custom built Colt M1911, Springfield .45ACP Loaded.. 9MM SA Range Officer,Ruger P-85, Springfield Stainless 9MM loaded, SA 9MM 5.25" XDM, Springfield 9mm Stainless Range Officer, STI double stack .45ACP.
    IDPA A41750 Safety Officer
    NRA Certified RSO
    "Stay out of the deep end of the pool; correct the problem with your credit card, not your dremel!"

    Comment

    • #3
      blazer
      Member
      • May 2009
      • 134

      I've shot alot of Blazer aluminum in 9mm with no problems. However when I shot .45 Blazer aluminum in my Paraordance P13.45 it caused my slide to lock back every few shots. I discovered that the bullet diameter/shape was a fraction wider than the reloaded stuff I used to shoot and during recoil and when the slide was stripping a round from the magazine the bullet would rub against the slide stop and push it up locking the slide back. I filed the slide stop down until there was enough clearance while still locking the slide back after the last shot is fired. You might want to try 1 box to see how it functions in your gun first. I'm not familiar with Glocks so maybe you won't have this problem.

      Comment

      Working...
      UA-8071174-1