Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
Can I load these?
Collapse
X
-
First ones say .45 colt so maybe too long.
Second ones say .460 S&W so probably not.
Edit: I saw they are both .452" but then why title them differently? Why not list them as .45acp, .45LC, and .460 S&W compatible?Last edited by joelogic; 06-23-2010, 8:06 PM. -
WHAT????
They are both .452" diameter bullets so, they will be fine in a .45acp. Of course, since you are new to reloading, I would advise you to seek experienced help developing loads for them. You might even call Hornady and ask them for help. Besides lack of load data for these in a .45acp cartridge, I see two possible issues that you may have to overcome. The first would be feeding issues. Some guns just don't like certain bullet profiles. If you run into this problem, try different mags and or mag followers first. The second possible hurdle you'll have to overcome is seating them deep enough to fit in a mag. You'll also need to find the proper bullet seating stem for the bullet profiles. I'm pretty sure that Hornady can provide you with that. Good luck and let us know how they work for you.NRA Certified Pistol, Rifle, Shotgun and Metallic Cartridge Reloading Instructor
California DOJ Certified Fingerprint Roller
Ventura County approved CCW Instructor
Utah CCW Instructor
Offering low cost multi state CCW, private basic shooting and reloading classes for calgunners.
sigpic CCW SAFE MEMBERSHIPS HERE
KM6WLVComment
-
if you dont have the feeding problems as mentioned , My first thought is these are designed for carbine velocites and may not perform worth a carp at acp velocity . may also want to ask the manufacture about this .Also I am sure these are not cheap , it would be more cost effective to buy bullets designed for the acp.Comment
-
I doubt it. Hornady states in the load notes for these that. when used in 45 Long Colt the cases must be trimmed shorter than normal for correct oal length. If you apply this to a 45 acp it would fall in to the no go range. since the 45 acp when cambering rests against the front edge of the case in the chamber . The round probably will be too short for proper primer strike. Also might not line up correctly with the extractor.
Now if you do not have a 45 Long Colt I would be happy to load them and test them for you."Life is a long song" Jethro TullComment
-
I double checked when I got home and these are the ones I have
The page you are looking for could not be located. We're sorry, but it appears the page you have requested is no longer available. Please check the URL and try again....
at this point I will likely just take them back and exchange them for something I know how to load. I like the idea but the loading is a bit confusing on these. The strange thing is the bullets used in their critical defense ammo are refferd to as FTX on their site but does not appear to be the same bullet and the bullets I got are not labeled very well.DoubleStar: STAR-15 - 24" Match-15 upper - Magpul PRS Stock
CMMG: MOD4SA - 16" MEDCON upper - CBS Stock
Glock 26
Howa 1500 Varminter Supreme
Browning Citori Ultra
Mossberg 500Comment
Calguns.net Statistics
Collapse
Topics: 1,870,895
Posts: 25,177,287
Members: 358,862
Active Members: 5,395
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 32516 users online. 130 members and 32386 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment