Unconfigured Ad Widget

Collapse

Anyone Loading 50 bmg?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bubbapug1
    Calguns Addict
    • Nov 2008
    • 7958

    Anyone Loading 50 bmg?

    I am picked up a 50 bmg.



    Now I need to whip up some ammo.

    Whats the skinny on dies and presses?? I have had some good info and input from impacto, I was wondering what some of you Calgunners are using for this motha of all loads?

    How hard is it to load 50bmg?

    Are components readily available?

    What is the cost per round??
    Last edited by bubbapug1; 05-17-2010, 9:47 PM.
    I love America for the rights and freedoms we used to have.
  • #2
    CSACANNONEER
    CGN/CGSSA Contributor - Lifetime
    CGN Contributor - Lifetime
    • Dec 2006
    • 44094

    50s are bigger and use different everything than those little cases.

    I think loading 50 is easier because, everything is bigger.

    Components can be hit and miss. Sometimes brass, primers, powder and different projos can be almost impossible to find for months at a time. If you are serious, you should stock up.

    I can load "match" quality (at least what I shoot in matches and, I'm not the worst shooter on the line) for as little as $2.50 each. But, I've stocked up on stuff when I've found a good deal. If I was starting today, it would be closer to $3/round. Plinking rounds can be loaded for $1-$2 per round.
    NRA Certified Pistol, Rifle, Shotgun and Metallic Cartridge Reloading Instructor
    California DOJ Certified Fingerprint Roller
    Ventura County approved CCW Instructor
    Utah CCW Instructor


    Offering low cost multi state CCW, private basic shooting and reloading classes for calgunners.

    sigpic
    CCW SAFE MEMBERSHIPS HERE

    KM6WLV

    Comment

    • #3
      bohoki
      I need a LIFE!!
      • Jan 2006
      • 20826

      Originally posted by CSACANNONEER
      50s are bigger and use different everything than those little cases.

      I think loading 50 is easier because, everything is bigger.

      Components can be hit and miss. Sometimes brass, primers, powder and different projos can be almost impossible to find for months at a time. If you are serious, you should stock up.

      I can load "match" quality (at least what I shoot in matches and, I'm not the worst shooter on the line) for as little as $2.50 each. But, I've stocked up on stuff when I've found a good deal. If I was starting today, it would be closer to $3/round. Plinking rounds can be loaded for $1-$2 per round.
      ive been saving my brass hoping to find a friendly reloader one day

      Comment

      • #4
        CSACANNONEER
        CGN/CGSSA Contributor - Lifetime
        CGN Contributor - Lifetime
        • Dec 2006
        • 44094

        If either of you wants to learn to load 50s, just let me know.
        NRA Certified Pistol, Rifle, Shotgun and Metallic Cartridge Reloading Instructor
        California DOJ Certified Fingerprint Roller
        Ventura County approved CCW Instructor
        Utah CCW Instructor


        Offering low cost multi state CCW, private basic shooting and reloading classes for calgunners.

        sigpic
        CCW SAFE MEMBERSHIPS HERE

        KM6WLV

        Comment

        • #5
          bubbapug1
          Calguns Addict
          • Nov 2008
          • 7958

          bump
          I love America for the rights and freedoms we used to have.

          Comment

          • #6
            EBR Works
            Vendor/Retailer
            • Dec 2007
            • 10492

            This is what I loaded for the M2 and they cycled the gun flawlessly:

            LC 1x M2 fired brass from Georgia Arms. About $.60 each shipped. Expect to lose about 15% the first firing. The rest should last for 2-3 firings. PM me for the prep procedure for these.



            WC860 powder from Hi-Tech ammo:



            For SoCal ranges, your only choice of projectiles are Lehigh 645g solid ball. Out of stock now unfortunately:



            I trimmed the cases to 3.910" since this length allows crimping into the very top of the Lehigh cannelure. The load I used was 224gr of WC860, CCI 35 primers, seated to 5.425" COL and given a heavy crimp with a Lee FCD. Keep in mind that the suggested starting load for this is 219gr of WC860.


            Check out our e-commerce site here:

            www.ebrworks.com

            Serving you from Prescott, AZ

            Comment

            • #7
              Mongoblack23
              Senior Member
              • May 2010
              • 774

              Originally posted by CSACANNONEER
              50s are bigger and use different everything than those little cases.

              I think loading 50 is easier because, everything is bigger.

              Components can be hit and miss. Sometimes brass, primers, powder and different projos can be almost impossible to find for months at a time. If you are serious, you should stock up.

              I can load "match" quality (at least what I shoot in matches and, I'm not the worst shooter on the line) for as little as $2.50 each. But, I've stocked up on stuff when I've found a good deal. If I was starting today, it would be closer to $3/round. Plinking rounds can be loaded for $1-$2 per round.
              can it really be considered plinking with .50 bmg? maybe thudding, thumping, something along those lines?

              as far as reloading, check mil surplus stores. every once in a while you find decent mil brass. occasionally you can even acquire it from a nearby military base. (though i wouldnt count on it....)
              sigpic

              Comment

              • #8
                buffybuster
                Veteran Member
                • Oct 2005
                • 2615

                Originally posted by bubbapug1
                I am picked up a 50 bmg.



                Now I need to whip up some ammo.

                Whats the skinny on dies and presses?? I have had some good info and input from impacto, I was wondering what some of you Calgunners are using for this motha of all loads?

                How hard is it to load 50bmg?

                Are components readily available?

                What is the cost per round??

                I'm having a hard time believing you are buying a .50BMG, before you understand how much it's going to cost to feed it..........
                Luck favors the prepared.

                The original battle plan did not survive initial contact with the enemy.

                "The things that will destroy America are prosperity at any price, peace at any price, safety first instead of duty first, the love of soft living and the get rich quick theory of life." -Theodore Roosevelt

                Comment

                • #9
                  EBR Works
                  Vendor/Retailer
                  • Dec 2007
                  • 10492

                  Originally posted by buffybuster
                  I'm having a hard time believing you are buying a .50BMG, before you understand how much it's going to cost to feed it..........
                  Impulse buys can be like that. $2.50 per round is tolerable for the amount of fun they generate!


                  Check out our e-commerce site here:

                  www.ebrworks.com

                  Serving you from Prescott, AZ

                  Comment

                  • #10
                    Divernhunter
                    Calguns Addict
                    • May 2010
                    • 8753

                    It had to be several years ago if in Calif.
                    A 30cal will reach out and touch them. A 50cal will kick their butt.
                    NRA Life Member, NRA certified RSO & Basic Pistol Instructor, Hunter, shooter, reloader
                    SCI, Manteca Sportsmen Club, Coalinga Rifle Club, Escalon Sportsmans Club, Waterford Sportsman Club & NAHA Member, Madison Society member

                    Comment

                    • #11
                      EBR Works
                      Vendor/Retailer
                      • Dec 2007
                      • 10492

                      Originally posted by Divernhunter
                      It had to be several years ago if in Calif.
                      Why would you say that? The OP is buying a Browning M3HB. It is completely exempt from the Cali BMG ban since it is not a rifle. Californians can still legally purchase a M2HB or M3HB belt fed .50 BMG gun.
                      Last edited by EBR Works; 05-18-2010, 11:27 PM.


                      Check out our e-commerce site here:

                      www.ebrworks.com

                      Serving you from Prescott, AZ

                      Comment

                      • #12
                        Fire4Effect
                        Senior Member
                        • Dec 2009
                        • 601

                        Originally posted by impactco
                        This is what I loaded for the M2 and they cycled the gun flawlessly:

                        LC 1x M2 fired brass from Georgia Arms. About $.60 each shipped. Expect to lose about 15% the first firing. The rest should last for 2-3 firings. PM me for the prep procedure for these.



                        WC860 powder from Hi-Tech ammo:



                        For SoCal ranges, your only choice of projectiles are Lehigh 645g solid ball. Out of stock now unfortunately:



                        I trimmed the cases to 3.910" since this length allows crimping into the very top of the Lehigh cannelure. The load I used was 224gr of WC860, CCI 35 primers, seated to 5.425" COL and given a heavy crimp with a Lee FCD. Keep in mind that the suggested starting load for this is 219gr of WC860.






                        Have you fired any of your loaded Lehigh 645 gr solids with crimp from a bolt gun? How was the accuracy?

                        Thanks.

                        Comment

                        • #13
                          EBR Works
                          Vendor/Retailer
                          • Dec 2007
                          • 10492

                          Mine were at 5.425" and looked exactly like your 5.42" crimped photo. One of us has a caliper that is off by .005".

                          I have not put any crimped rounds through my Ferret 50 in DTC. I have shot the Lehighs from my Ferret uncrimped and can consistently hit steel at 600 yds. I have not shot for groups past 100 yards and those groups were sub-moa.


                          Check out our e-commerce site here:

                          www.ebrworks.com

                          Serving you from Prescott, AZ

                          Comment

                          • #14
                            Butthead
                            Senior Member
                            • Aug 2007
                            • 508

                            Originally posted by impactco
                            For SoCal ranges, your only choice of projectiles are Lehigh 645g solid ball. Out of stock now unfortunately:

                            FYI,

                            There are other choices available to shoot here in SoCal but I dont know of any cheaper. Hornady A-MAX and Barnes solids are both fine to shoot at ranges that dont allow steel cored ammo. Both are pretty expensive (about twice the cost of the Lehigh) but I can tell you that at least in my bolt gun, A-MAX shoots way better. I have not tried the Barnes solids but I know a few people that swear by them. I have never gotten the Lehigh's to group well even with good powder, but I have not done that much developement with the Lehigh's either.

                            It also helps to anneal your brass every few firings. I have some LC brass that I got from MrKubota right after I got my rifle and I have 8+ firings on them and have only culled less then 5% of the cases and they still look great, but I am shooting these through a very tight chambered bolt gun.

                            I use a Lee press and custon Lee dies and have no complaints. Very inexpensive and work just fine.
                            Never return fire!


                            2e 32 32 20 2e 33 38 30 20 2e 33 38 20 39 6d 6d 20 2e 34 34 20 2e 35 30 41 45 20 2e 32 32 33 20 35 2e 35 36 20 33 30 2d 33 30 20 2e 33 30 38 20 2e 35 30 44 54 43 20 32 32 2d 32 35 30 20 33 37 4d 4d 20 2e 34 35 41 43 50

                            Comment

                            • #15
                              bubbapug1
                              Calguns Addict
                              • Nov 2008
                              • 7958

                              Originally posted by buffybuster
                              I'm having a hard time believing you are buying a .50BMG, before you understand how much it's going to cost to feed it..........
                              Yea, and how many men get sucked into marraige...slavery was supposed to be abolished by the civil war but lives in Orange country....

                              Sometimes its better nto to plan too far ahead.

                              The way I figure is it can't be worse than two ex-wives, a boat, an airplane, and the fcking IRS
                              I love America for the rights and freedoms we used to have.

                              Comment

                              Working...
                              UA-8071174-1