Unconfigured Ad Widget

Collapse

Primer pocket poll

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • hntnnut
    Senior Member
    • Jan 2008
    • 1066

    Primer pocket poll

    OK for those of you that use military brass do you Swage or ream your brass?

    Richard
    51
    Yes I Swage
    0%
    26
    No I Ream
    0%
    25
    "This country with it's institutions, belongs to the people who inhabit it. Whenever they shall grow weary of the existing goverment, they can excercise their constitutional right of amending it, or their revolutionary right to dismemember or overthrow it."
    Abe Lincoln

    ΜΟΛΩΝ ΛΑΒΕ
  • #2
    phish
    Veteran Member
    • Jan 2006
    • 3089

    I'm a cheapskate, I ream them out with the case mouth deburring tool.

    Comment

    • #3
      CSACANNONEER
      CGN/CGSSA Contributor - Lifetime
      CGN Contributor - Lifetime
      • Dec 2006
      • 44094

      I finally got a Dillion Swager so, I swage the small stuff and ream my 50 brass.
      NRA Certified Pistol, Rifle, Shotgun and Metallic Cartridge Reloading Instructor
      California DOJ Certified Fingerprint Roller
      Ventura County approved CCW Instructor
      Utah CCW Instructor


      Offering low cost multi state CCW, private basic shooting and reloading classes for calgunners.

      sigpic
      CCW SAFE MEMBERSHIPS HERE

      KM6WLV

      Comment

      • #4
        ENDO
        Member
        • May 2008
        • 160

        Ream or Swage

        Swage

        Comment

        • #5
          Bug Splat
          Calguns Addict
          • Dec 2007
          • 6561

          Originally posted by phish
          I'm a cheapskate, I ream them out with the case mouth deburring tool.
          This^^^^

          Always worked out more then fine. Just a couple twists and its done.

          Comment

          • #6
            Sunwolf
            Calguns Addict
            • May 2008
            • 7445

            Swage.

            Comment

            • #7
              five.five-six
              CGN Contributor
              • May 2006
              • 34925

              I give it to friends that I don't like

              Comment

              • #8
                C.G.
                Calguns Addict
                • Oct 2005
                • 8249

                I used to swage but now I use a reamer on Hornady LNL Prep center.
                sigpic

                Comment

                • #9
                  Harbinger
                  Senior Member
                  • Oct 2005
                  • 1152

                  Used to do the RCBS deburring tool trick, but now use their swager. I like how uniform it gets the pockets without removing any material.

                  I've bent the 'small' swaging head a few times. However, unless you separate your brass by brand, mil vs. commercial, and even date, you're going to bend it a few times.

                  Luckily, RCBS replaces all parts for free!

                  Mike


                  Join the NRA!!

                  Comment

                  • #10
                    joelogic
                    Calguns Addict
                    • May 2008
                    • 6593

                    Swage. Endo, you are everywhere, soon your post count will be 50.
                    Micro/Mini Reflex Red Dot Sight Mount for the M1, M1a/M14 platform

                    Comment

                    • #11
                      WileyWilly
                      Senior Member
                      • May 2008
                      • 520

                      Swage. Used to use a chamfer tool but I saw the swagers and decided that I could build some tooling for my press(retired machinist). Works quite well.
                      WW

                      Comment

                      • #12
                        gottarollwithit
                        Member
                        • Aug 2006
                        • 461

                        I hire CSAcannoneer for that stuff and recycle any new crimped stuff that i find.
                        For the little i load on a single stage, it's easier to send a bunch out for a full prep job, including swage.
                        The dude abides...

                        Comment

                        • #13
                          cleanguy46
                          Senior Member
                          • Mar 2008
                          • 1050

                          After reaming like 1k 5.56 LC casings and punishing the hands It was time to get a Dillon Super Swage 600. Well worth the cost if you are processing alot of military crimped brass.
                          sigpicWango Tango!

                          Comment

                          • #14
                            halifax
                            Veteran Member
                            • Oct 2005
                            • 4440

                            I swage a few thousand and toss them in a box. When it comes time to load them, all cases get uniformed on my RCBS TrimMate case prep center including a quick flash hole de-burring. So, I guess I do both.
                            Jim


                            sigpic

                            Comment

                            • #15
                              Air
                              Senior Member
                              • May 2005
                              • 1640

                              Ream, with a Lyman tool chucked in a cordless drill. I'm in the process of upgrading some of my gear. I'm probably going to buy a Wilson trimmer with a reaming attachment. Kill two birds with one stone.

                              Comment

                              Working...
                              UA-8071174-1