Zero bullets misleads on their delivery times

[bubbapug1]

Zero bullets misleads on their delivery times. The website says 6 weeks but I got my stuff in one week!!! I cut open a Berrys plated and a Zero FMJ 9mm bullet, both 124 grain...the jacket is significantly thicker, and as I prepare to load 9mm major to 1550 FPS thats a good thing. The base is not copper covered on the Zero which makes them not that great for an indoor range in my opinion...

They are similar in price to the plated bullets...

Thanks Zero.

[kmca]

Just curious, why load to 1550fps?

[gose]

I have an order from Powder valley for some Zero 9s (147gr FMJs). Order was placed early March -09... If I run out of my current stash before I get those, I'll switch to something else and never use Zeros again.

[bubbapug1]

order direct

9mm major = 1600 fps for 124 grain. I need the gas to run the compensator on a race gun.

[huckberry668]

is it the 180 power-factor (major) you need? I'm not sure I understand the 'gas to run the compensator' part... also, can you share your recipe for that velocity?

[kmca]

order direct

9mm major = 1600 fps for 124 grain. I need the gas to run the compensator on a race gun.

(1600 X 124)/100=198.4 pf
I run a pf of about 170 to have a little wiggle room for weather etc, did they change the requirement?