Unconfigured Ad Widget

Collapse

Unique powder 115gr fmj data

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • fullspeed1
    Senior Member
    • Nov 2008
    • 1908

    Unique powder 115gr fmj data

    Worked up three different grain weights of Unique powder under 115gr fmj's @ an OAL of 1.150". Went and shot them today with all positive results. The three grain weights are 5.3, 5.5, 5.7 all produced manageable recoil with full slide lock on my Glock 19. To my surprise, Unique powder is rather clean burning. I have been using W231 religiously and decided to venture out. All in all, I am happy with 5.5gr of Unique and will be using this formula for a while.
  • #2
    mike100
    Veteran Member
    • Jul 2006
    • 2507

    I use it for everything. 28ga, 12ga, 38spl, 44 spl, light 44 mag, 45acp, 9mm.

    Comment

    • #3
      dstiltner
      Member
      • Sep 2009
      • 241

      I also use the same load, 5.5 gr Unique under 115 gr plated bullets with oal 1.150", in my Kimber 1911. Over 4000 rounds and counting.

      Comment

      • #4
        ireload
        Veteran Member
        • Aug 2009
        • 2589

        I like using Unique with 9mm. Yields higher velocity than the W231. It's been several years now that Unique has a cleaner burning property. I get good results too with .38 spl and .357 mag. My plinking load is 5.8 grains topped with 115 grain Rainer or Berry's 9mm plated bullet.

        Comment

        • #5
          fullspeed1
          Senior Member
          • Nov 2008
          • 1908

          Originally posted by ireload
          I like using Unique with 9mm. Yields higher velocity than the W231. It's been several years now that Unique has a cleaner burning property. I get good results too with .38 spl and .357 mag. My plinking load is 5.8 grains topped with 115 grain Rainer or Berry's 9mm plated bullet.
          ireload,
          I was thinking about getting a Marlin 1894c which shoots .357mag, and would love to consolidate powders. Are you using SPM primers or standard SP primers for your load? My Lyman 49th isn't very specific as too which type of primer is recommended. It says Small Pistol, Magnum. It's kind of deceiving.

          Comment

          • #6
            ireload
            Veteran Member
            • Aug 2009
            • 2589

            You can use standard small pistol primer. My Speer reload manual list Unique with standard small pistol primer. Even if you use magnum primers you can just back off the powder charge a bit by going mid-range instead of maximum.

            By the way, you'll like the Marlin. I had a chance to shoot that rifle a few years back and was sorry that I did not buy one when I had the chance.

            Comment

            • #7
              fullspeed1
              Senior Member
              • Nov 2008
              • 1908

              Originally posted by ireload
              You can use standard small pistol primer. My Speer reload manual list Unique with standard small pistol primer. Even if you use magnum primers you can just back off the powder charge a bit by going mid-range instead of maximum.

              By the way, you'll like the Marlin. I had a chance to shoot that rifle a few years back and was sorry that I did not buy one when I had the chance.
              Sweet, Thanks!!

              Comment

              Working...
              UA-8071174-1