Unconfigured Ad Widget

Collapse

Hornady XTP .357, 125gr

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mather911
    Banned
    • Jan 2010
    • 197

    Hornady XTP .357, 125gr

    OK, here is the problem. I normally load my 38 JHP with unique according to my Richard Lee loading manual 5.0-5.3grs. I ordered some Hornady 125gr XTP bullets but my manual doesn't give data for using unique powder with that bullet. The most common denominator between 38spl and 38+P is universal and titegroup. Does anyone load these that has experimented or have a good recipe? I like to stay as versitle as possible which is why I used unique.

    If someone knows that I can use unique please let me know and give me the loading data.
  • #2
    ballistic
    Senior Member
    • Feb 2006
    • 598

    Alliant has data on the website for Unique and the Gold Dot 125 grain JHP bullet.
    Start low and work up.
    ------------------------------------------------

    Comment

    • #3
      mather911
      Banned
      • Jan 2010
      • 197

      Originally posted by ballistic
      Alliant has data on the website for Unique and the Gold Dot 125 grain JHP bullet.
      Start low and work up.
      http://www.alliantpowder.com/reloade...aspx?gtypeid=1
      I saw that but the XTP is a whole different animal. Density is much greater then a standard JHP. I think it was 0.177 where most are around 0.144. I guess I could try talking to Hornady and see what they recommend.

      Comment

      • #4
        ireload
        Veteran Member
        • Aug 2009
        • 2589

        This recipe taken from Speer #13 manual. 5.7 grains Unique. The manual does not recommend reducing less than 5.7 grains. C.O.L 1.435". That's standard pressure.

        This recipe is +P pressure also from the same manual. 5.7 grains minimum - 6.0 grains maximum Unique. C.O.L 1.435"

        By the way I like Unique for .357 mag, 9mm, .45 acp loads.
        Last edited by ireload; 01-29-2010, 4:55 PM.

        Comment

        • #5
          mather911
          Banned
          • Jan 2010
          • 197

          Thanks guys for the help. I found this data on the Hodgdon's website.

          125gr HDY XTP, Longshot powder, 7.0grs, 1228fps, 18,300psi

          That's smoking for a 38+P, so that is what I am loading tonight. I was lucky and Duncan's had Longshot today. It should be noted that their prices are outrageous, 22lr brick of 500 is $40, that is the Winchester Super X. All other prices are double as well.

          Comment

          • #6
            South40
            Junior Member
            • Sep 2007
            • 59

            From Lyman 48th Edition, .38 Special loads using 125 XTP and Unique powder:
            Start 4.0 grains, Max 6.0 grains
            Federal brass
            CCI 500 primer

            S40

            Comment

            Working...
            UA-8071174-1