.223 reloading

[jamesg35]

Im looking into get a reloader i want to get a dillon 650 but with all the
bells and whistles that gets pretty expensive. right now i shoot around
200-300 rds per month because of cost and availabilty, i would like to
shoot around 500-800 per month. and eventually start shooting
6.8 or 6.5 ammo.
The question is can anyone help me with a setup to reload .223 / 9mm
and later down the road 6.8 or 6.5 and 308 that is a easier on the pocketbook
than the dillon.
Im new to reloading still learning reading up on the internet and info is
pretty confusing.

Thanks in advance.
James

[Gunsrruss]

Dillon

550B...You have to buy Dies, why not buy shell plates from Dillon. Your dies will fit the Dillon. Then all you have to do is change the die shell plate when you want to change calibers. They will even send you a little stand for the shell plate and dies. Their powder dispenser set $90 comes with large and small powder measure. This way you can use one for rifle and one for pistol. Those powder bars will give you accuracy to +/- .1 gr. You can't beat that with a stick. You will get plenty of use with the 550B. Buy yourself a RCBS hand primer if you want to make it faster. Reloading is not about speed. It's about accuracy You will also need a digital scale to check loads.

[AVgunGUY]

I use the 550b for 308, 380, 9mm and 45 (and adding the 223 in a couple of months). It's great and it starts as a base unit with the ability to add automation. You can build it over time. It will handle 1k rounds a month with no problem.

[dreslinger]

I have a 550B and love it. I took my time and bought everything over a years period. You will also need case trimmer, primer tray/flipper, bullet puller, caliper, brass cleaner and other small items to make your life easier. I found some "how to's" on you tube that were great. I also took a reloading class to learn exactly what to do. Not saying I know it all. I am newbee but I am armed with a bit of knowledge now. I currently do this for fun so I take my time. no radio or TV. No phone calls. I weigh each round (yes, each round) and do a random sampling by pulling apart rounds and measuring powder and seating depth. I am having a lot of fun and can't wait to shoot a few thousand rounds. Currently, I am making 9mm rounds and am preparing to make .223's. I have been hearing how 223 is best made with a single stage press but have to try first. The Sportsmans Warehouse near me is having a sale on RCBS (10% off). Downside of the Dillon is finding parts locally. I have to usually buy direct and pay full price. Midwayusa is one of the best sources for supplies. Good Luck!