Unconfigured Ad Widget

Collapse

Deformed bullets

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • grymster
    Veteran Member
    • May 2009
    • 4724

    Deformed bullets

    I'm loading 357 magnum, Sierra 125gr SJSP over 9.7gr Herco, CCI SP and new Winchester brass. I'm loading them on a Lee Turret with Lee carbide 3-die set. The issue I'm having is, while the crimp doesn't look particularly overbearing, the soft point is coming out slightly mushroomed and with a fair size chamfer on it.

    Before I go back and try and figure this out, I thought I'd ask if someone might have some insight. Maybe I'm crimping too heavy, or there's something up with the seat plug? Maybe it's the wrong one? Or maybe the deformation is normal with this type of bullet?
    grym

    Lay me dun in the caul caul grun.....

    caput ferrum equus ego veho
  • #2
    tankerman
    I need a LIFE!!
    • Mar 2006
    • 24240

    Swap out your seating plug if you don't like the deformed look. Get one that's a closer match to your bullet's nose profile.

    Comment

    • #3
      22popnsplat
      Senior Member
      • May 2008
      • 1042

      It may also help to crimp and seat in seperate steps.

      Comment

      • #4
        grymster
        Veteran Member
        • May 2009
        • 4724

        Well, I took feedback I got from tankerman and some folks on TFL and went back down and scratched my head a bit. Thought about ordering a FCD, but didn't want to wait. Thought about seating, then crimping, but didn't much care for that idea either. Then I considered modifying the seat plug by either flattening it or machining it out to leave clearance for the lead portion of the bullet, then making a nice long cone shaped section that would lock out on the copper part of the ogive, but I didn't much care for that option either.

        Came back upstairs and realized that someone gave me a set of old RCBS 357 dies. Went back down and settled on the RCBS for seating and the Lee for crimping. Being an old RCBS die, it had the round, knurled locking ring, too big to fit in next to the other dies. I swiped a Lee locking ring from another die and went about adjusting the settings.

        Problem solved! Making nice, pretty bullets now..... ones that are more worthy than their user.

        Thanks!
        grym

        Lay me dun in the caul caul grun.....

        caput ferrum equus ego veho

        Comment

        Working...
        UA-8071174-1