Unconfigured Ad Widget

Collapse

You need one of these

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Henry Shooter
    Senior Member
    • Aug 2008
    • 1099

    You need one of these

    Mornin' Gang
    What a great morning. Got up and went straight into the reloading room, before the morning coffee was made I sat down and processed 40 pieces of brass. Thats size, decap, clean the primer pocket, chamfer the inner and outer neck. They are now in for their final clean before I prime, charge and seat the bullet. All this was made easier by the person that created the RCBS cleaning station. Man I cant believe how easy this is and how long it took me to get one. I believe that if you like to process your own brass you need one of these. Start to finish 40 pieces, 25 minutes approx. Wow.
  • #2
    CSACANNONEER
    CGN/CGSSA Contributor - Lifetime
    CGN Contributor - Lifetime
    • Dec 2006
    • 44093

    "Chamfer the inner and outer neck" did you trim? 25 min sounds like a long time to me unless you are prepping "match" quality brass.
    NRA Certified Pistol, Rifle, Shotgun and Metallic Cartridge Reloading Instructor
    California DOJ Certified Fingerprint Roller
    Ventura County approved CCW Instructor
    Utah CCW Instructor


    Offering low cost multi state CCW, private basic shooting and reloading classes for calgunners.

    sigpic
    CCW SAFE MEMBERSHIPS HERE

    KM6WLV

    Comment

    • #3
      ar15barrels
      I need a LIFE!!
      • Jan 2006
      • 57143

      Are you talking about the RCBS trim mate?



      If you think that's nice, get a giraud trimmer.
      Randall Rausch

      AR work: www.ar15barrels.com
      Handguns: www.handgunbarrels.com
      Bolt actions: www.700barrels.com
      Foreign Semi Autos: www.akbarrels.com
      Most work done while you wait on a scheduled shop visit.

      Comment

      • #4
        Henry Shooter
        Senior Member
        • Aug 2008
        • 1099

        Your right that is a little long..... But I did have to set up the press. I usually trim but this was in spec.

        Comment

        • #5
          22popnsplat
          Senior Member
          • May 2008
          • 1042

          If you didnt trim you should not need to chamfer

          Comment

          • #6
            ar15barrels
            I need a LIFE!!
            • Jan 2006
            • 57143

            Originally posted by 22popnsplat
            If you didnt trim you should not need to chamfer
            New cases often need to be chamfered.
            I loaded up 30 rounds of 223 this morning in new brass and I had to chamfer the case mouths to get the bullets to seat nicely.
            Randall Rausch

            AR work: www.ar15barrels.com
            Handguns: www.handgunbarrels.com
            Bolt actions: www.700barrels.com
            Foreign Semi Autos: www.akbarrels.com
            Most work done while you wait on a scheduled shop visit.

            Comment

            • #7
              Henry Shooter
              Senior Member
              • Aug 2008
              • 1099

              A good day complete

              The ladies fresh out of the bath, and dressed for the show
              Attached Files

              Comment

              • #8
                22popnsplat
                Senior Member
                • May 2008
                • 1042

                Originally posted by ar15barrels
                New cases often need to be chamfered.
                I loaded up 30 rounds of 223 this morning in new brass and I had to chamfer the case mouths to get the bullets to seat nicely.
                But did you your new brass need to be deprimed and the primer pocket cleaned ?

                I have to agree that the rcbs trim mate is a great tool

                Comment

                • #9
                  ar15barrels
                  I need a LIFE!!
                  • Jan 2006
                  • 57143

                  Originally posted by 22popnsplat
                  But did you your new brass need to be deprimed and the primer pocket cleaned ?
                  They were clean as they came from winchester.
                  Randall Rausch

                  AR work: www.ar15barrels.com
                  Handguns: www.handgunbarrels.com
                  Bolt actions: www.700barrels.com
                  Foreign Semi Autos: www.akbarrels.com
                  Most work done while you wait on a scheduled shop visit.

                  Comment

                  • #10
                    bruceflinch
                    I need a LIFE!!
                    • Jan 2006
                    • 40127

                    I can't step into the reloading corner w/o a cup of coffee first thing in the am..

                    Nice work!
                    Actually I only started collecting Milsurps 3 years ago. I think I might own about 24...They're cheaper than guns that will most likely never get the opportunity to kill somebody...

                    I belong to the group that uses firearms, and knows which bathroom to use.

                    Tis better to have Trolled & lost, Than to never have Trolled, at all.

                    Secret Club Member?.

                    Comment

                    • #11
                      LGB Loader
                      Senior Member
                      • Jun 2008
                      • 727

                      I can't step into the reloading corner w/o a cup of coffee first thing in the am..
                      Yup. I need my coffee and a thermos full at that.

                      LGB
                      Training in The Peaceful Art to achieve unnatural naturalness and natural unnaturalness, BEcoming WATER while serving The Great I AM.

                      John 3:16

                      Comment

                      • #12
                        swerv512
                        Veteran Member
                        • Mar 2006
                        • 3076

                        god, i gotta get one of those. it would make life so much easier- even though my round count is low...
                        but...
                        right now i gotta focus on handgun reloading supplies...

                        Comment

                        Working...
                        UA-8071174-1