Unconfigured Ad Widget

Collapse

Brass Lifetime.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ARRRR-15
    Senior Member
    • Oct 2006
    • 1207

    Brass Lifetime.

    How many time can you reload brass? Still trying to get all the cost together.
    FreeLock Mini Conversion Kit
    http://www.calguns.net/calgunforum/s...d.php?t=155147

    FreeLock Bullet-Button Installation and Removal Tool
    http://www.calguns.net/calgunforum/s...64#post1749664

    The M.L.D. (Magazine Locking Device)
    http://www.calguns.net/calgunforum/s...hlight=Vamfire
  • #2
    ocabj
    Calguns Addict
    • Oct 2005
    • 7924

    It depends. Straight wall pistol like .45 or 9mm? You'll lose brass before it goes bad.

    Bottleneck rifle brass? It depends.

    Non-magnum cartridges like .223 or .308 in a bolt gun? At least 6-7 times with normal loads and neck sizing.

    Non-magnum cartridges in a semi-auto rifle? 3-4 times depending on the loads.

    What are you loading for?

    Distinguished Rifleman #1924
    NRA Certified Instructor (Rifle and Metallic Cartridge Reloading) and RSO
    NRL22 Match Director at WEGC

    https://www.ocabj.net

    Comment

    • #3
      ARRRR-15
      Senior Member
      • Oct 2006
      • 1207

      Hope to be loading .45, 9mm, and .223. So how do you know when your brass isn't any good? Do you just measure it? How?

      I guessing that every time you shoot a round the case expands and then the round needs to be trimmed down. Everytime you do this the case wall keeps getting thinner, correct?
      FreeLock Mini Conversion Kit
      http://www.calguns.net/calgunforum/s...d.php?t=155147

      FreeLock Bullet-Button Installation and Removal Tool
      http://www.calguns.net/calgunforum/s...64#post1749664

      The M.L.D. (Magazine Locking Device)
      http://www.calguns.net/calgunforum/s...hlight=Vamfire

      Comment

      • #4
        eckerph
        Senior Member
        • May 2006
        • 1694

        It depends. Straight wall pistol like .45 or 9mm? You'll lose brass before it goes bad.
        This is very true , as far as rifle brass it depends. you might want to do a google search, i use to anneal my swiss brass and i got 10 loadings before i sold the rifle to my brother so it all really depends on what you're loading etc.
        http://www.calguns.net/calgunforum/s...d.php?t=764869 M1 ammo for sale

        Comment

        • #5
          tteng
          Senior Member
          • Sep 2006
          • 1911

          What's a good & cheap way to anneal your brass (especially around the neck area ?) It's for 30-cal rifle rounds.

          Comment

          • #6
            ocabj
            Calguns Addict
            • Oct 2005
            • 7924

            Originally posted by ARRRR-15
            Hope to be loading .45, 9mm, and .223. So how do you know when your brass isn't any good? Do you just measure it? How?

            I guessing that every time you shoot a round the case expands and then the round needs to be trimmed down. Everytime you do this the case wall keeps getting thinner, correct?
            Don't sweat 45 or 9mm. All you need to look for is neck/case splits.

            As far as .223, if this is a bolt gun, you can neck-size to maximize brass life. You'll probably get 6-7 loads out of it before accuracy starts to go south.

            If you're reloading for the AR or another autoloader, I typically don't reuse brass for more than 5 reloads. If I'm loading service rifle competition ammo, I only use once or twice fired brass. After that, it gets used for practice. After a few reuses as practice ammo, I watch to see if there are any signs of it wearing out (ie: neck splits, very loose primer pocket, etc). If so, the whole batch gets tossed into the brass recycling bucket.

            FYI: I load ammo in batches of 50 or 100, but I keep brass in batches of 100. So if more than 2-3 piece of brass show wear, the whole batch of 100 goes. Usually if 1-2 pieces go bad, like a neck split, I'll just replace it with another piece of brass (assuming practice batch) and keep the batch.

            Distinguished Rifleman #1924
            NRA Certified Instructor (Rifle and Metallic Cartridge Reloading) and RSO
            NRL22 Match Director at WEGC

            https://www.ocabj.net

            Comment

            • #7
              gose
              Veteran Member
              • Oct 2005
              • 3953

              9mm I dont really worry about, since old cases will be lost before they go bad. Except for S&B I have never had a case rupture. I load pretty weak loads though, but used to load/shoot ~20k 9mm / year.

              For my .38 match ammo I count the number of times they've been shot and won't use them more than 7 times or so. After that they are moved to the "training" box. Cases from the training box are used until they rupture.
              With Oden on our side.

              Comment

              • #8
                CAT_101
                Member
                • Feb 2006
                • 183

                I get well over 12 -20 reloads on pistol 9-45. my 223 in my SU-16 I only get about 3 -4 reloads in befor they start spliting. 308 6-7 times. hope it helps
                Savge 12VBSS 308 and AR-15 Stolen in Bass Pro shop parking lot Mantica,
                SU-16A For sale $375 comes with 3x9 NStar scope,
                Mosburg 500A, remington sportsman 48 12Ga,
                berata 96FL, Springfield XD-9, Kimber Raptor II

                Comment

                • #9
                  Fjold
                  I need a LIFE!!
                  • Oct 2005
                  • 23094

                  Unless you have a good contact pyrometer annealing at home is very difficult. The visual difference between OK and all F'ed up is too hard to judge by eye.

                  The low number Springfield receivers were all ruined by professionals who did the heat treating by eye.

                  Saying that, primer pocket condition is a good way to judge brass life. You can feel how tight the primer pockets are when they are inserted if you use a hand priming tool. When they start to feel loose, chuck that bunch of brass.

                  I typically get 10-15 reloadings out of most of my brass including 223, 243, 308 7 mag and 300 WSM brass, 375H&H, and about 6 reloading out of my 6.5x286 (I load it right at max pressure)

                  I probably have some 45 ACP cases that have been reloaded 50 times (I don't lose too many)
                  Last edited by Fjold; 01-12-2007, 8:27 PM.
                  Frank

                  One rifle, one planet, Holland's 375




                  Life Member NRA, CRPA and SAF

                  Comment

                  • #10
                    eckerph
                    Senior Member
                    • May 2006
                    • 1694

                    What's a good & cheap way to anneal your brass (especially around the neck area ?) It's for 30-cal rifle rounds.
                    It is somewhat slow, but my approach is to hold a case in my
                    fingers and rotate in a torch flame. Do this in a dimly lighted
                    room so that you can see when the metal begins to glow a dull
                    red. This gives very good control and results in evenly annealed
                    necks. It is possible to burn the very thin brass neck with the
                    torch. As soon as it glows dull red, drop it into water. The
                    sensitivity of your fingers assures that you do not overheat the
                    case base. This goes fairly fast once one establishes a cadence.

                    I pulled this down from another site and it is exactly how i anneal my cases, use some spare brass to practice on first, then lightly squash the necks of you're practice brass and if they have a little spring to them after you squeeze them with pliers you're good to go. Also you only do the neck area, annealing makes the brass soft so getting the case head too hot is a very bad thing.
                    http://www.calguns.net/calgunforum/s...d.php?t=764869 M1 ammo for sale

                    Comment

                    • #11
                      !@#$
                      Senior Member
                      • Nov 2006
                      • 2470

                      if you use starting loads your brass can be reloaded nearly forever i have read.

                      Comment

                      • #12
                        DV8
                        Senior Member
                        • Oct 2005
                        • 527

                        I dont worry about 45 acp or 9mm brass. If its not split, its still good to go.

                        I used to have brass that was at least 3 years old, reloaded hundreds of times with no problem. Then the "bitter" half decided to clean out my domain (the garage) and threw it all out. Boy was I pissed, I never really counted but there must have been at least 4000 or so in that batch.

                        Comment

                        Working...
                        UA-8071174-1