Does anyone use Accurate rifle powder?

[ballistic]

I came across a great local deal on an 8lb jug of AA 2495BR powder.
I am looking for people who have experience using this powder.
How does it meter?
Have you had good results?
Any other info or tips would be appriciated.
I know it is supposed to have a similar burn rate to IMR4895 and H4895.
I want to use it for .223, .308 Win., and 30-06.

Thanks!

[ballistic]

Just checking.

[ivanimal]

I use accurate powders but not the one you mention. I like 2520 for my 204 Ruger and my 22-250. Powder meters well and performs well and clean.

[freonr22]

Loads 1 to 5 (of 5):
Available .223 Remington (5.56mm NATO) Loads using AA-2495 Bullet Make
& Wt. (gr) Powder
Type Charge
(gr) Muzzle
Vel. (fps) K. E.
(ft-lbs) Barrel
Len. (in) Owner 40 Sierra Accurate AA-2495
26.5
3561
1126
22.0
View
roadrn1 53 Hornady Accurate AA-2495
25.0M
3201
1206
24.0
View
stigma 55 Nosler Accurate AA-2495
25.2M
3206
1255
24.0
View
stigma 77 Sierra Accurate AA-2495
24.1M
2750
1293
20.0
View
stigma 80 Sierra Accurate AA-2495
22.6M
2732
1326
24.0
View
stigma
Loads 1 to 7 (of 7):
Available .308 Winchester (7.62mm NATO) Loads using AA-2495 Bullet Make
& Wt. (gr) Powder
Type Charge
(gr) Muzzle
Vel. (fps) K. E.
(ft-lbs) Barrel
Len. (in) Owner 125 Nosler Accurate AA-2495
47.0CM
2931
2385
24.0
View
stigma 150 Hornady Accurate AA-2495
46.0CM
2806
2623
24.0
View
stigma 155 Sierra Accurate AA-2495
44.0M
2828
2753
24.0
View
stigma 178 Hornady Accurate AA-2495
42.0
2529
2529
22.0
View
president100 180 Hornady Accurate AA-2495
43.0FM
2450
2400
22.0
View
president100 180 custom Accurate AA-2495
43.0M
2581
2663
22.0
View
president100 180 Nosler Accurate AA-2495
43.0M
2592
2686
24.0
View
stigma

[rksimple]

I've used a ton of the accurate arms data powders. Great for blasting loads but a little temperature sensitive. Still was very accurate inside 300. If its a good deal I'd go for it.

[ar15barrels]

I've used a ton of the accurate arms data powders. Great for blasting loads but a little temperature sensitive. Still was very accurate inside 300. If its a good deal I'd go for it.

I just scored the rest that he had.
23lbs for $200.

I'll use it for blasting 308.
Now I just need to find some blasting 308 bullets.

[rksimple]

I just scored the rest that he had.
23lbs for $200.

I'll use it for blasting 308.
Now I just need to find some blasting 308 bullets.

Good find. I haven't done any research as to the br designation, but the normal 2495 is extruded and shouldn't be too sensitive. You may have good luck in match loads as well, depending.

Too bad I can't go back and buy more DP73 for 52 bucks a keg.