Load data for my .40S&W mix of components

[FieldsofFire]

Just starting to get going on reloading after picking up components from here and there. I'm about to get started on my first batch of .40S&W and can't seem to find any data that matches all my components, I figure this isn't something to mix and match with as a relatively new reloader.

I have:
Load data from Speer Reloading Manual #14 (great book BTW)
Wolf and Remington SP primers
AA No. 2 powder
Rainier 180gr. jacketed flat nose bullets

The problem lies in that in the Speer book data I have, it does not list a recipe for 180gr. bullets using AA No. 2 powder, but it does for 155gr. bullets. Is there a recipe around this or do I need to change up my components?

Thanks, everyone.

[f4tweet]

Check a different reloading manual. I have three. I like the Lee's Second Edition. You can also go to the Accurate web site and check their spec's. BTW, I think Rainiers are plated, so use lead specs.

http://www.accuratepowder.com/data/Acc%20Guide%20v3.3%20version.pdf

[Fjold]

From Accurate Powders website's reloading data.

40 S&W
Barrel: 4" ■ Twist: 1-16" ■ Primer: WIN WSP ■ Bullet Diameter .400"

No.2 powder- 180 grain RANIER HP 4.3 grains for 794 fps to 4.8 grains for 903 fps at 33,400 PSI 1.125 OAL

You can use this data for the FN also.

[FieldsofFire]

Check a different reloading manual. I have three. I like the Lee's Second Edition. You can also go to the Accurate web site and check their spec's. BTW, I think Rainiers are plated, so use lead specs.

http://www.accuratepowder.com/data/A...%20version.pdf

Thanks. I didn't think of going to Accurate's website...that was smart of me...

Yes, the Rainier's are lead and plated.

From Accurate Powders website's reloading data.

40 S&W
Barrel: 4" ■ Twist: 1-16" ■ Primer: WIN WSP ■ Bullet Diameter .400"

No.2 powder- 180 grain RANIER HP 4.3 grains for 794 fps to 4.8 grains for 903 fps at 33,400 PSI 1.125 OAL

You can use this data for the FN also.

Thanks.