I have been interested in reloading for a few years now, and ammo availability and pricing tells me that its time to take the plunge. I have been soaking up info from my Hornady manual and from the internet for the last couple months. I want to start with loading .223, and later down the road I will probably want to do .38 Special and 9mm. (My .38 is a snubbie, so it doesn't see much range time, and I don't yet own a 9mm)
I am getting to ordering equipment, and I am still a little confused about what I need, what I should have, and what I want. (As we all know, those are all very different things). After doing some comparison shopping, I decided to go with a Lee single-stage as my first press. I bought the Lee Challenger Anniversary Kit and a set of RCBS .223 dies (full length). I would appreciate input on which items I still need, and which items I would want to make the loading easier.
Here's a list of what I have:
1. Lee Challenger Anniversary Kit which includes:
*Lee Breech Lock Challenger Press
*3x Breech Lock quick change bushings
*Lee Powder Measure
*Lee Safety Scale
*Powder Funnel
*Cutter and Lock Stud for case trimming (still need to order the Case Length Gage to use these items)
*Chamfer Tool
*Case Lube
*Primer Pocket Cleaning Tool
*Lee Safety Prime (I think I will be buying a manual priming tool, the parts used in this system look like they will not last very long.)
2. RCBS .223 FL dies
3. RCBS #10 Shellholder
There are some items I know I will need such as:
1. Calipers
2. Case tumbler
3. Media Sifter
4. Loading block(s)
5. Case neck brush
6. Lee auto-prime
7. Case polish
8. Tumbling media
9. Case lube pad
10. Lee Case length gage (for use with the lee trimmer from my kit)
Now the questions:
1. Do I need a crimp die to ensure proper function in a semi-auto firearm?
2. Are there any items I'm missing?
3. On a single stage press, do I need more than one shellholder? Should I have a few extra anyway?
4. Is there anyone who reloads in the Vacaville area I could come watch? I'm pretty sure I have the general ideas down, I just want to see the whole process in front of me before I get started. I'll be glad to bring the beer.
I would greatly appreciate any help from some experienced reloaders.
Thanks,
D
I am getting to ordering equipment, and I am still a little confused about what I need, what I should have, and what I want. (As we all know, those are all very different things). After doing some comparison shopping, I decided to go with a Lee single-stage as my first press. I bought the Lee Challenger Anniversary Kit and a set of RCBS .223 dies (full length). I would appreciate input on which items I still need, and which items I would want to make the loading easier.
Here's a list of what I have:
1. Lee Challenger Anniversary Kit which includes:
*Lee Breech Lock Challenger Press
*3x Breech Lock quick change bushings
*Lee Powder Measure
*Lee Safety Scale
*Powder Funnel
*Cutter and Lock Stud for case trimming (still need to order the Case Length Gage to use these items)
*Chamfer Tool
*Case Lube
*Primer Pocket Cleaning Tool
*Lee Safety Prime (I think I will be buying a manual priming tool, the parts used in this system look like they will not last very long.)
2. RCBS .223 FL dies
3. RCBS #10 Shellholder
There are some items I know I will need such as:
1. Calipers
2. Case tumbler
3. Media Sifter
4. Loading block(s)
5. Case neck brush
6. Lee auto-prime
7. Case polish
8. Tumbling media
9. Case lube pad
10. Lee Case length gage (for use with the lee trimmer from my kit)
Now the questions:
1. Do I need a crimp die to ensure proper function in a semi-auto firearm?
2. Are there any items I'm missing?
3. On a single stage press, do I need more than one shellholder? Should I have a few extra anyway?
4. Is there anyone who reloads in the Vacaville area I could come watch? I'm pretty sure I have the general ideas down, I just want to see the whole process in front of me before I get started. I'll be glad to bring the beer.
I would greatly appreciate any help from some experienced reloaders.
Thanks,
D

Comment