Case Prep Service IE

[bearstatearmory.com]

Anybody in the IE (preferably Temecula area) have a case prep service specifically for 223? I have atleast 5,000 pieces that are all prepped with the exception of swage. I don't want to use a single stage for 5,000+ pieces, so I was thinking anybody with an RL 1050 or RL 1100 or something that wants to make a little extra money on the side or if someone has a business of this?

[Bigtls1]

Shoot me a PM
I?m in Riverside though

[bearstatearmory.com]

Shoot me a PM
I?m in Riverside though

PM Sent


Sent from my iPhone using Tapatalk

[lincoln45]

Anybody in the IE (preferably Temecula area) have a case prep service specifically for 223? I have atleast 5,000 pieces that are all prepped with the exception of swage. I don't want to use a single stage for 5,000+ pieces, so I was thinking anybody with an RL 1050 or RL 1100 or something that wants to make a little extra money on the side or if someone has a business of this?

very satisfied with the brass proccesor !!!!!
2-3 week turn around
highly recomend
https://craftedballistics.com/.../223-brass-processing...
from the finished product i have no doubt they did what they advertise
Pre wash to remove any carbon, stains, mud etc
Roll size
Deprime
Swage to remove any crimps
Full length resize
Neck size w/carbide expander to provide proper neck diameter/concentricity for better neck uniformity, bullet tension and less bullet run out
Trim, chamfer, deburr case mouth to 1.750 +/- .003
Final quality control inspection w/ case gauge block to verify correct head space
Polish
Once completed, the brass then goes through a complete wash to remove any case lube as well as to cleaning out the primer pockets to ensure proper seating depth consistency.

[golfish]

very satisfied with the brass proccesor !!!!!
2-3 week turn around
highly recomend
https://craftedballistics.com/.../223-brass-processing...
from the finished product i have no doubt they did what they advertise
Pre wash to remove any carbon, stains, mud etc
Roll size
Deprime
Swage to remove any crimps
Full length resize
Neck size w/carbide expander to provide proper neck diameter/concentricity for better neck uniformity, bullet tension and less bullet run out
Trim, chamfer, deburr case mouth to 1.750 +/- .003
Final quality control inspection w/ case gauge block to verify correct head space
Polish
Once completed, the brass then goes through a complete wash to remove any case lube as well as to cleaning out the primer pockets to ensure proper seating depth consistency.

I might have to check this place out. Seems like a good price, $95.00 for 1k cases. It'll take me a week to process that much.

[Bigtls1]

I might have to check this place out. Seems like a good price, $95.00 for 1k cases. It'll take me a week to process that much.

Shoot me a PM if you'd like yours processed locally. I'm nearly 1/2 the price.

[golfish]

Shoot me a PM if you'd like yours processed locally. I'm nearly 1/2 the price.

I sure will, thanks for the heads up.

[bearstatearmory.com]

Bump, I used the guy from Riverside and he was great but I can’t get ahold of him anymore. Anyone else?

[bearstatearmory.com]

Bump