Unconfigured Ad Widget

Collapse

Trying to get back into reloading...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • desertjosh
    Calguns Addict
    • May 2011
    • 5749

    Trying to get back into reloading...

    So I just began reloading on a single stage press about 7 years ago and had just bought a Hornady LNL AP press, but then we moved and I haven't touched it since. It's been really hard for me to get back into it. I've forgotten almost everything I knew. I've mounted the LNL and am trying to gear up to load 9mm. Getting so confused with all the dies needed ect. Anyone else have this issue? Don't even know where to start. I've watched a ton of utube videos but still feels like I'm in the dark. Do I need to have a lock out die? Maybe I should start on my single stage again, but my powder drop has gotten rusted beyond repair...ugh. Thanks for letting me vent
    Welcome to OT, where hypocrisy is King, outrage is Queen and the Kingdom is on the shores of the Denial River.

    __________________
  • #2
    eaglemike
    CGN/CGSSA Contributor - Lifetime
    CGN Contributor - Lifetime
    • Jan 2008
    • 4005

    My advice would be to go slow. Start with setting the sizing/decapping die. Then go to the next station, and so on. You might scrap some brass, but no biggie for 9mm. When you go into full production, and every station is filled, try to eyeball the powder charge to be sure they all look the same amount of fill before you seat the bullet.
    I bought one of those years ago, but never set it up as life changed my plans. Hornady is really great at supporting their products, so check their site and/or call them. Good luck!
    There are some people that it's just not worth engaging.

    It's a muzzle BRAKE, not a muzzle break. Or is your muzzle tired?

    Comment

    • #3
      the_tunaman
      Veteran Member
      • Dec 2012
      • 2583

      Just take your time, measure twice and cut once, so to speak, and it will come back. It doesn’t get much easier than 9mm, so take your time. Work through the reloader manual regarding OAL, be sure to have a case length headspace gauge if you are unsure.
      MAGA - drain the swamp^D^D^D^D^Dcesspool!
      Proud deplorable wacist!
      #NotMyStateGovernment!
      Just remember BAMN - there is no level too low for them to stoop!
      COVID survivor - ain?t gonna get pricked!

      Comment

      • #4
        Henry Shooter
        Senior Member
        • Aug 2008
        • 1099

        “Don’t Try…….
        Do!”

        Comment

        • #5
          desertjosh
          Calguns Addict
          • May 2011
          • 5749

          My manual got lost in the move somehow
          What's the latest/greatest Manual out these days?
          Welcome to OT, where hypocrisy is King, outrage is Queen and the Kingdom is on the shores of the Denial River.

          __________________

          Comment

          • #6
            kcstott
            I need a LIFE!!
            • Nov 2011
            • 11796

            Originally posted by desertjosh
            My manual got lost in the move somehow
            What's the latest/greatest Manual out these days?
            Still a Lyman, now it the 51st edition

            Comment

            • #7
              bigbossman
              I need a LIFE!!
              • Dec 2012
              • 11360

              I'm just over the hill from you. If you need help, gimme a shout.
              Always looking for vintage Winchester and Marlin lever action rifles. Looking to sell? Know of one for sale? Drop me a line!

              "Give a conservative a pile of bricks and you get a beautiful city. Give a leftist a city and you get a pile of bricks."

              Comment

              • #8
                Barbarosa
                Senior Member
                • Jan 2013
                • 2166

                The Lock N Load is a good machine and is fairly easy to use. I've got mine set up with an automatic case feeder.

                Have you checked out Hornady's You Tube channel?

                Comment

                • #9
                  Cowboy T
                  Calguns Addict
                  • Mar 2010
                  • 5725

                  The idea of starting out single-stage again to re-learn how to reload is a really good one. Safety first. For your powder drop, just pick up a Pro Auto-Disk Powder Measure with the flare/charge die, or an Auto-Drum Powder Measure with the same die. They're inexpensive and work very well.

                  You do not need a Lock-Out die on your progressive press. I have one on my Lee Pro 6000 press just to try it out, and yes, it works, but I find that it's not needed. That Pro Auto-Disk Powder Measure is *RELIABLE*. I assume that Hornady's powder measure is equally good.

                  For 9mm, or for that matter, any other handgun cartridge, here's what you actually *need*.

                  1.) Decapper/resizer die
                  2.) Powder charging/flaring die
                  3.) Bullet seating/crimping die

                  That's it. You need only those three.

                  Now, some people do prefer to separate the powder charging and the flaring functions. Also, some others prefer to seat the bullet and do the crimp (taper crimp only, in the case of 9mm) separately. Nothing wrong with doing so if that's your preference. Your LNL AP press has five stations, so theoretically you could accommodate the separation of all the steps if you wanted. But I don't see the benefit of doing so for cartridges like 9mm, .38 Special, .357M, .44 Spl/Mag, .380 Auto, .45 ACP, or anything else similar.
                  "San Francisco Liberal With A Gun"
                  F***ing with people's heads, one gun show at a time. Hallelujah!
                  http://www.sanfranciscoliberalwithagun.com (reloading info w/ videos)
                  http://www.liberalsguncorner.com (podcast)
                  http://www.youtube.com/sfliberal (YouTube channel)
                  ----------------------------------------------------
                  To be a true Liberal, you must be 100% pro-Second Amendment. Anything less is inconsistent with liberalism.

                  Comment

                  • #10
                    desertjosh
                    Calguns Addict
                    • May 2011
                    • 5749

                    Originally posted by bigbossman
                    I'm just over the hill from you. If you need help, gimme a shout.
                    Thank you sir, if I get too jammed up I reach out
                    Welcome to OT, where hypocrisy is King, outrage is Queen and the Kingdom is on the shores of the Denial River.

                    __________________

                    Comment

                    • #11
                      desertjosh
                      Calguns Addict
                      • May 2011
                      • 5749

                      Originally posted by kcstott
                      Still a Lyman, now it the 51st edition
                      Thank you sir
                      Welcome to OT, where hypocrisy is King, outrage is Queen and the Kingdom is on the shores of the Denial River.

                      __________________

                      Comment

                      • #12
                        desertjosh
                        Calguns Addict
                        • May 2011
                        • 5749

                        Originally posted by Cowboy T
                        The idea of starting out single-stage again to re-learn how to reload is a really good one. Safety first. For your powder drop, just pick up a Pro Auto-Disk Powder Measure with the flare/charge die, or an Auto-Drum Powder Measure with the same die. They're inexpensive and work very well.

                        You do not need a Lock-Out die on your progressive press. I have one on my Lee Pro 6000 press just to try it out, and yes, it works, but I find that it's not needed. That Pro Auto-Disk Powder Measure is *RELIABLE*. I assume that Hornady's powder measure is equally good.

                        For 9mm, or for that matter, any other handgun cartridge, here's what you actually *need*.

                        1.) Decapper/resizer die
                        2.) Powder charging/flaring die
                        3.) Bullet seating/crimping die

                        That's it. You need only those three.

                        Now, some people do prefer to separate the powder charging and the flaring functions. Also, some others prefer to seat the bullet and do the crimp (taper crimp only, in the case of 9mm) separately. Nothing wrong with doing so if that's your preference. Your LNL AP press has five stations, so theoretically you could accommodate the separation of all the steps if you wanted. But I don't see the benefit of doing so for cartridges like 9mm, .38 Special, .357M, .44 Spl/Mag, .380 Auto, .45 ACP, or anything else similar.
                        Thank you so much for the detailed reply. I've now got my powder drop really tuned in to within .1 gr. Super happy. Now just need to figure out the other dies. Decapping seems to be sticky even after lube.
                        Welcome to OT, where hypocrisy is King, outrage is Queen and the Kingdom is on the shores of the Denial River.

                        __________________

                        Comment

                        • #13
                          Cowboy T
                          Calguns Addict
                          • Mar 2010
                          • 5725

                          Waitasec...is your decapper die also a resizing die? If so, then is your decapper/resizer die one of those "carbide" types? If it is, then you don't need case lube.

                          What is your complement of dies? That might help us give you advice.
                          "San Francisco Liberal With A Gun"
                          F***ing with people's heads, one gun show at a time. Hallelujah!
                          http://www.sanfranciscoliberalwithagun.com (reloading info w/ videos)
                          http://www.liberalsguncorner.com (podcast)
                          http://www.youtube.com/sfliberal (YouTube channel)
                          ----------------------------------------------------
                          To be a true Liberal, you must be 100% pro-Second Amendment. Anything less is inconsistent with liberalism.

                          Comment

                          • #14
                            the_tunaman
                            Veteran Member
                            • Dec 2012
                            • 2583

                            Originally posted by kcstott
                            Still a Lyman, now it the 51st edition
                            Can’t go wrong with a Lyman… any Lyman.

                            I just scored a Dillon XL650 - picking it up tomorrow. That will be going alongside my two Dillon 550s - can’t wait to get everything set up in our new house and get the 650 dialed in.
                            Last edited by the_tunaman; 12-28-2022, 11:48 PM.
                            MAGA - drain the swamp^D^D^D^D^Dcesspool!
                            Proud deplorable wacist!
                            #NotMyStateGovernment!
                            Just remember BAMN - there is no level too low for them to stoop!
                            COVID survivor - ain?t gonna get pricked!

                            Comment

                            • #15
                              desertjosh
                              Calguns Addict
                              • May 2011
                              • 5749

                              Originally posted by Cowboy T
                              Waitasec...is your decapper die also a resizing die? If so, then is your decapper/resizer die one of those "carbide" types? If it is, then you don't need case lube.

                              What is your complement of dies? That might help us give you advice.
                              Idk, because I'm not in my shop right now, but I'm using the Lee 4 die 9mm set.
                              Welcome to OT, where hypocrisy is King, outrage is Queen and the Kingdom is on the shores of the Denial River.

                              __________________

                              Comment

                              Working...
                              UA-8071174-1