Unconfigured Ad Widget

Collapse

Casting your own bullets

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • JoeC
    Member
    • Mar 2009
    • 317

    Casting your own bullets

    I just read an interesting article in American Handgunner issue from Sep/Oct 09 about this guy who casts his own bullets and has for a long time. It shows some of his setup and all that and he talks about the benefits of casting his own bullets.

    I've often wondered about bullet casting and whether it would be worth picking up. I've not seen many people talking about it though. Is it a specialized addition to reloading that people don't bother much with?

    How many of you guys cast your own bullets? What do you use? Are there different types of lead to consider? I'm wondering if the local outdoor range would let me dig up their traps for lead. It's run by the county so I don't think they pull the lead and sell it themselves.

    I'll be looking into some .452 bullets for a 1911.

    Anyhoo, discuss.
  • #2
    bohoki
    I need a LIFE!!
    • Jan 2006
    • 20826

    i had a casting post somewhere but if you want "good" information you shoudl check out

    This is the dedicated cast bullet forum!


    Comment

    • #3
      Gnzrme
      Senior Member
      • Oct 2007
      • 908

      I cast. I am casting for 45 and 357. I am also trying to cast for 357 Sig, but not having much luck. I get my lead at wholesale cost from a friend who works as a precious metals refiner and sells me wheelweights. All you need is a cast iron pot to melt lead in, propane burner, another furnace or pot to cast from (optional) as rendering wheelweights is very messy and you dont want that crud in your bullets, molds, lube and a resizing machine and die. I enjoy casting but you have to render down the weights outside as they are dirty and smoke and smell badly...

      is it worth it? Well, at the height of the lead craze, I paid $60.00/100#'s of lead, probably got 70-80#'s of usable lead 70 x 7000 (gr's/pound) /230 gr/bullet yields about 2100 bullets at about 60/500, I am saving over $180.00 if I went out and bought those same bullets. This calculation does not factor in lube which is not very expensive or the cost of the equipment, but as you can see, it is worth it....Just need some basic equipment, and patience and you can turn out some nice bullets..

      This is only basic info, if you want more, see the above link or www.handloads.com . They are a good bunch of guys and will give you good info.

      Steven.
      Last edited by Gnzrme; 07-22-2009, 1:09 AM.

      Comment

      • #4
        spareparts
        Senior Member
        • Oct 2008
        • 738

        I cast for black powder. I have a BP revolver and muzzleloader. To be honest, casting for them is fine because you really don't shoot that much volume during a range trip. IMO I wouldn't mess with it for a modern firearm though being that it's a bit time consuming and takes a bit of practice to make quality bullets.

        Comment

        • #5
          JoeC
          Member
          • Mar 2009
          • 317

          I've been watching this guys videos.


          He's got some good stuff for handloading.

          Comment

          • #6
            popeye4
            Senior Member
            • Nov 2008
            • 1534

            I've tried casting off and on, I'm off right now. I mainly shoot highpower at this time, so casting isn't really suitable for that. It is great for handguns, particularly revolvers. But it is a whole 'nother discipline within handloading (read that as many more things to spend your bucks on!).

            I've got a good supply of lead I've collected from wheelweights. I've bought my tires from the same shop for 10 years and they are never shy about giving me a bucketfull when I go in and ask.

            This is a good site to check out: http://www.lbtmoulds.com/. Get the book if you're really interested.
            sigpic
            NRA Life Member
            CRPA Life Member

            Comment

            • #7
              mike100
              Veteran Member
              • Jul 2006
              • 2507

              took me about a year or a little longer to get it down to where I can actually cast a fairly ok bullet (about 5 or 6 tries in my spare time). The alloy recipe is really important, secondly sizing to your individual gun/ load experimentation.

              Comment

              • #8
                bohoki
                I need a LIFE!!
                • Jan 2006
                • 20826

                Originally posted by mike100
                took me about a year or a little longer to get it down to where I can actually cast a fairly ok bullet (about 5 or 6 tries in my spare time). The alloy recipe is really important, secondly sizing to your individual gun/ load experimentation.
                yea the alloy is important i'm just using range scrap its a bit soft i guess(i am too cheap to get a tester)
                the first cartridge i load into a mag is a fmj then fill up with my lead

                it seems to keep the leading down but when i get home after shooting 200 and i run a copper brush through i get lead wire chunks i once had one a whole inch long it was like a ribbon

                i'm using a glock 21 with aftermarket stainless barrel

                Comment

                • #9
                  CSACANNONEER
                  CGN/CGSSA Contributor - Lifetime
                  CGN Contributor - Lifetime
                  • Dec 2006
                  • 44094

                  I've done a bit of casting. If you want a lesson/demo, let me know.
                  NRA Certified Pistol, Rifle, Shotgun and Metallic Cartridge Reloading Instructor
                  California DOJ Certified Fingerprint Roller
                  Ventura County approved CCW Instructor
                  Utah CCW Instructor


                  Offering low cost multi state CCW, private basic shooting and reloading classes for calgunners.

                  sigpic
                  CCW SAFE MEMBERSHIPS HERE

                  KM6WLV

                  Comment

                  • #10
                    LGB Loader
                    Senior Member
                    • Jun 2008
                    • 727

                    I cast boolits for my 30-30 Win, 375 WIN, 357 Mag, 38 spcl, 45ACP, 9MM , and various .309 Cal and .311 with gas checks. Most of my Lead shooting is from my own casts.

                    My friend is the senior tech at a Goodyear so I get wheel weights for free on a weekly basis. My set up is modest, a simple Lee bottom drop furnace and sizers. for lubes, I tumble lube in Rooster Jacket or LLA together with Johnson's Paste wax or I pan lube with a couple of different lube recipes depending on the application.

                    I find it fun and also just another way to tinker about. I have found that while some are great for target and plinking, others have a great usefulness. I have really been impressed with the accuracy results, my 375 WINCHESTER in particular. I would also have no reservations on hunting with this as well.

                    LGB
                    Training in The Peaceful Art to achieve unnatural naturalness and natural unnaturalness, BEcoming WATER while serving The Great I AM.

                    John 3:16

                    Comment

                    • #11
                      Gnzrme
                      Senior Member
                      • Oct 2007
                      • 908

                      LGB Loader,

                      What are you using for gas checks on your .311. Is that on an Enfield perhaps. I have one and am looking to cast for that. Tell me your load, alloy and results..Also, where is LGB? In CA you cannot use Lead ammo to hunt in certain areas and I believe that they are trying to expand that to the entire state.

                      Comment

                      • #12
                        Nodda Duma
                        • Nov 2007
                        • 3455

                        Haven't started casting yet but I'm preparing to. I just picked up 85 lbs of lead (half of it in wheel weights) from the local recycling center for $17. That's only $0.20 a pound. That is a lot of bullets for $17. Casting bullets will save you money.

                        -Jason
                        Looking for photos for your wall?
                        Help feed my children by clicking here.

                        Comment

                        • #13
                          JoeC
                          Member
                          • Mar 2009
                          • 317

                          Originally posted by Nodda Duma
                          Haven't started casting yet but I'm preparing to. I just picked up 85 lbs of lead (half of it in wheel weights) from the local recycling center for $17. That's only $0.20 a pound. That is a lot of bullets for $17. Casting bullets will save you money.

                          -Jason
                          You just answered a question I had! I'll try a recycling center for lead.

                          Comment

                          Working...
                          UA-8071174-1