Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
Casting your own bullets
Collapse
X
-
Reloading Supplies of all types (PRESSES, POWDERS, PRIMERS, DIES, BRASS, MANUEL'S, TRIMMERS, LEAD, CASTING EQUIPMENT AND MORE) (NEW, USED, OLD, VINTAGE, DISCONTINUED, HARD TO FIND)
WHAT DO YOU NEED?
https://www.calguns.net/calgunforum/....php?t=1608381
I'll put together another parts and gear ad soon. -
Love my NOE moulds, way better than Lee. But I would use Lee first so you understand everything as to not destroy your NOE moulds.
May the Tinsel Fairy never visit you!
Comment
-
This is a great book if you really want to get into it. For my pistol bullets I have pretty much gone to powder coating. For the most part the "hard cast" bullets are not really necessary for the average handgun ammo. To me the "quality" of mold mostly has to do with what you are trying to do. Lee molds work great for my 45 acp and plinking 45-70's but want a nicer mold for long range.
Comment
-
Love my NOE moulds, way better than Lee. But I would use Lee first so you understand everything as to not destroy your NOE moulds.
May the Tinsel Fairy never visit you!
Thanks. I see the sense in what you have written. Practice makes perfect and mistakes at the beginning of the learning curve are likely.Comment
-
My best advise on casting bullets: A chore is a burden to be endured, while a hobby is a pleasure that's looked forward to. Don't get into bullet casting to save money. Don't get into it because reloading supplies and other resources are scarce. Don't do it thinking that it's an extra necessity to continue shooting. The only reason that anyone should take up bullet casting is if they find enjoyment in creating their own components and tailoring their own loads. Learning the techniques of casting and loading cast ammo is an advanced level of reloading. If you enjoy reloading and are looking for more opportunities to expand your skills, then bullet casting may be something just for you. There's a huge amount of knowledge to be learned, but casting is something that can be started out on with a few simple tools, and then can expand to the extent that you wish to follow it. My best advise to people curious about learning bullet casting is to do it only because it's something that you want to do.Comment
-
Well...as it happens, I did get into casting to save money. I also did it as a necessity to continue shooting often enough to get competent at it. What I discovered is that I actually enjoy doing it as well, though it seems that time has gotten in the way over the last few years. The actual act of casting, I can kinda take or leave. It's a necessity. The satisfaction that I get from seeing my own handiwork, then loading them into cases and making ammo with them...that's really what I enjoy. "I built that! Somebody else didn't make that happen!"My best advise on casting bullets: A chore is a burden to be endured, while a hobby is a pleasure that's looked forward to. Don't get into bullet casting to save money. Don't get into it because reloading supplies and other resources are scarce. Don't do it thinking that it's an extra necessity to continue shooting. The only reason that anyone should take up bullet casting is if they find enjoyment in creating their own components and tailoring their own loads. Learning the techniques of casting and loading cast ammo is an advanced level of reloading. If you enjoy reloading and are looking for more opportunities to expand your skills, then bullet casting may be something just for you. There's a huge amount of knowledge to be learned, but casting is something that can be started out on with a few simple tools, and then can expand to the extent that you wish to follow it. My best advise to people curious about learning bullet casting is to do it only because it's something that you want to do.
"San Francisco Liberal With A Gun"
F***ing with people's heads, one gun show at a time. Hallelujah!
http://www.sanfranciscoliberalwithagun.com (reloading info w/ videos)
http://www.liberalsguncorner.com (podcast)
http://www.youtube.com/sfliberal (YouTube channel)
----------------------------------------------------
To be a true Liberal, you must be 100% pro-Second Amendment. Anything less is inconsistent with liberalism.Comment
-
First of all if you don't already have a big supply of lead it's much more difficult and expensive to buy these days. Some people in certain industries may be able to get it easily. I've checked buying commercial bullet alloy and it's not much cheaper then buying already cast bullets. The only casting I have done is for big lube black powder bullets. It was fun but I can't imagine casting bullets for all of the other shooting I do.Comment
-
Well you can always but from someone like me. I sale lead in ingot form for around $1.50 and up a pound depending on hardness. Pure lead, clip on wheel weights, Lyman #2, Linotype, foundery, solder, pewter even zinc for you cannon guys. And of course I ship.First of all if you don't already have a big supply of lead it's much more difficult and expensive to buy these days. Some people in certain industries may be able to get it easily. I've checked buying commercial bullet alloy and it's not much cheaper then buying already cast bullets. The only casting I have done is for big lube black powder bullets. It was fun but I can't imagine casting bullets for all of the other shooting I do.Reloading Supplies of all types (PRESSES, POWDERS, PRIMERS, DIES, BRASS, MANUEL'S, TRIMMERS, LEAD, CASTING EQUIPMENT AND MORE) (NEW, USED, OLD, VINTAGE, DISCONTINUED, HARD TO FIND)
WHAT DO YOU NEED?
https://www.calguns.net/calgunforum/....php?t=1608381
I'll put together another parts and gear ad soon.Comment
-
Starting out it makes sense to buy good material from a fellow Calgunner.Comment
-
Thanks. Do you have a website? When I buy a case of bullets they ship with the usps boxes about $17 per box of 65 pounds of bullets. Do you ship the same way? If you don't have a website can you send a price list? I'm more interested in a softer alloy for blackpowder bullets. Thanks.Comment
-
If it fits it ships via USPS. My mail lady hates me.Originally posted by PalmarisYou should not worry about me. This web site is monitored by all kind of authorities and if they found this kind of post credible enough as threat, they might want to start investigation. I have no idea what can be outcome. Just saying.Comment
-
No website but 56lbs of near pure lead (dead soft) lead in ingot form $95 shipped sorce is (your choice) either lead cable sheating or melted down large ingots from a foundry. Yes I shipped in medium flat rate boxes with tracking number and $100 insurance included. I basically make a wooden box inside the flat rate box and use a lot of tape. It's really hard to bet this deal but I have a limited amount right now. Price very based on type of lead content and form. Just ran out of scrap wood. Pm meThanks. Do you have a website? When I buy a case of bullets they ship with the usps boxes about $17 per box of 65 pounds of bullets. Do you ship the same way? If you don't have a website can you send a price list? I'm more interested in a softer alloy for blackpowder bullets. Thanks.
I would like to make it clear I do have lead for sale on another forum. The items on that forum will only be sold on that forum but I have a lot of lead alloys. I test all lead for potential zinc contamination by the way and test harness on unknown lead with art pencils to judge its harness.
Tip a #2 Pencil can actually be a tool. Using a certain technique a #2 Pencil is the same harness as Lyman #2 (5% antimony 5% tin 90% lead) Alloy and will scratch any lead that is softer then it. I'm going to have my daughter tell her teacher that. LolLast edited by BIGOX; 10-11-2022, 7:49 PM.Reloading Supplies of all types (PRESSES, POWDERS, PRIMERS, DIES, BRASS, MANUEL'S, TRIMMERS, LEAD, CASTING EQUIPMENT AND MORE) (NEW, USED, OLD, VINTAGE, DISCONTINUED, HARD TO FIND)
WHAT DO YOU NEED?
https://www.calguns.net/calgunforum/....php?t=1608381
I'll put together another parts and gear ad soon.Comment
-
Lead has gotten crazy expensive and hard to get especially here in California but if you are always looking you can find it. To get started Bigox looks to have a decent deal, especially for pure lead.
I bought 240#s of roofing lead about 6 months ago. I use either 50/50 solder to make 25-1 or mix foundry lead to get the hardness I want. Cast Boolits has a great calculator. I find the solder off Craigslist or Facebook for 7-8 bucks a pound and have been getting foundry lead off Ebay.
I also have a couple hundred pounds of an unknown lead but it has a hardness of about 10 and pours great. For my 45 acp it works great. I cast for my45-70's , 45 acp, 45 colt and 44 mag. I also have molds for my 9mm's but that is not going so well.Comment
Calguns.net Statistics
Collapse
Topics: 1,870,862
Posts: 25,176,820
Members: 358,862
Active Members: 5,398
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 30447 users online. 134 members and 30313 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment