Unconfigured Ad Widget

Collapse

OAL: 0.1" longer than SAAMI

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • blackandgold1991
    Junior Member
    • Jun 2021
    • 43

    OAL: 0.1" longer than SAAMI

    Hi,

    I measure the chamber OAL of my 308 weatherby vanguard and it was longer than SAAMI spec by 0.1". is that normal? does't mean that I should be seating the bullet higher than SAAMI recommendations?
  • #2
    G-forceJunkie
    Calguns Addict
    • Jul 2010
    • 6534

    Your mixing two things up. Your measuring the OAl based on the lenght of the the lead. Chamber size (heaadspace) has nothing to do with the bullet or OAL of the cartridge. OAL only matters if it is too short (builds higher pressure) or too long and doesnt fit in the magazine or feed. OAL can be adjusted for the bullet shape to get optimum jump to the lands. How deep your neck is throated and the shape of the bullet (long and pointy or blunt and rounded) will determine what OAL you can run. Accuracy wise, some bullets tolerate alot of jump, some are very picky and like a specific number, say .050"
    If you seat your bullet to SAAMI you would have .100" jump which it totally fine.

    Comment

    • #3
      blackandgold1991
      Junior Member
      • Jun 2021
      • 43

      Originally posted by G-forceJunkie
      Your mixing two things up. Your measuring the OAl based on the lenght of the the lead. Chamber size (heaadspace) has nothing to do with the bullet or OAL of the cartridge. OAL only matters if it is too short (builds higher pressure) or too long and doesnt fit in the magazine or feed. OAL can be adjusted for the bullet shape to get optimum jump to the lands. How deep your neck is throated and the shape of the bullet (long and pointy or blunt and rounded) will determine what OAL you can run. Accuracy wise, some bullets tolerate alot of jump, some are very picky and like a specific number, say .050"
      If you seat your bullet to SAAMI you would have .100" jump which it totally fine.
      thanks! thats the information I was looking for!

      Comment

      • #4
        fguffey
        Senior Member
        • Mar 2010
        • 1408

        I measure the chamber OAL of my 308 Weatherby vanguard and it was longer than SAAMI spec by 0.1". is that normal? doesn't mean that I should be seating the bullet higher than SAAMI recommendations?
        How did you measure the length of the chamber? And then why did you measure the length of the chamber?

        F. Guffey

        Comment

        • #5
          kcstott
          I need a LIFE!!
          • Nov 2011
          • 11796

          Originally posted by blackandgold1991
          Hi,

          I measure the chamber OAL of my 308 weatherby vanguard and it was longer than SAAMI spec by 0.1". is that normal? does't mean that I should be seating the bullet higher than SAAMI recommendations?
          How did you measure?

          Comment

          • #6
            fguffey
            Senior Member
            • Mar 2010
            • 1408

            I measure the chamber OAL of my 308 Weatherby vanguard and it was longer than SAAMI spec by 0.1". is that normal? doesn't mean that I should be seating the bullet higher than SAAMI recommendations?
            A friend built 4 magnificent rifles, he made the stocks, the reamer etc. he chambered all four with rifles with the same reamer and then. (?) No one knows but one of the rifles started to scatter groups like a shotgun. He called me and I said, "I DO NOT KNOW" and then he asked me where would I start when determining the problem? I told him; the next thing I know he went straight to the Internet and got their advice.

            After that he called me again, and I said "YOU DID WHAT!? That afternoon he shows up here telling me what the Internet said. I made it very clear he did not need me. Anyhow, we started over, I showed him what the problem was, ever smith from beyond Mohanans TX. to Dallas had an opportunity. When I finished, he wanted to know what caused it. I did not know who caused it, all I knew was 'what caused 'it'.

            F. Guffey

            Comment

            • #7
              TomReloaded
              Senior Member
              • Nov 2013
              • 1637

              That in no way identified the problem you encountered, the fix applied, or how it related to... Anything. 😂

              Comment

              • #8
                Dirtlaw
                CGN/CGSSA Contributor - Lifetime
                CGN Contributor - Lifetime
                • Apr 2018
                • 3480

                Be cautious. Failure has consequences.

                Comment

                • #9
                  fguffey
                  Senior Member
                  • Mar 2010
                  • 1408

                  That in no way identified the problem you encountered, the fix applied, or how it related to... Anything.
                  There was no fix, I could have identified the problem, but he would have all kind of problems understanding the answer, so I showed him. After that he lost the rifle.

                  F. Guffey

                  Comment

                  • #10
                    smoothy8500
                    Veteran Member
                    • Sep 2009
                    • 3846

                    Cool story..... Bro.

                    Comment

                    • #11
                      LynnJr
                      Calguns Addict
                      • Jan 2013
                      • 7959

                      There is no way on planet earth to build 4 rifles with the same reamer and one barrel has 0.1 variation in freebore.
                      Lynn Dragoman, Jr.
                      Southwest Regional Director
                      Unlimited Range Shooters Association (URSA)
                      www.unlimitedrange.org
                      Not a commercial business.
                      URSA - Competition starts at 2000 yards!

                      Comment

                      • #12
                        kcstott
                        I need a LIFE!!
                        • Nov 2011
                        • 11796

                        Originally posted by LynnJr
                        There is no way on planet earth to build 4 rifles with the same reamer and one barrel has 0.1 variation in freebore.
                        Yeah but I built four rifles with the same reamer that all fireform brass within .001" of each other.

                        Comment

                        • #13
                          TomReloaded
                          Senior Member
                          • Nov 2013
                          • 1637

                          Many or maybe even most factory rifles have a free bore that allows ammo to be loaded beyond saami spec for the *ammunition*. It's totally normal to be way waaaay over max length, and it's normal and safe. Not the most accurate way to make a rifle, but it drops pressure and is probably a lawyer thing.

                          My savage would have bullets falling out of the case before jamming the rifling.

                          This is not a chambering error though, that's typically when your shoulder is too far out and blows your case. That's bad, but something different.

                          I'm unclear what guffy is describing.

                          Comment

                          • #14
                            smoothy8500
                            Veteran Member
                            • Sep 2009
                            • 3846

                            Originally posted by TomReloaded
                            I'm unclear what guffy is describing.
                            I don't think he's ever given a clear description...
                            Last edited by smoothy8500; 10-05-2022, 1:37 PM.

                            Comment

                            • #15
                              ar15barrels
                              I need a LIFE!!
                              • Jan 2006
                              • 57202

                              Originally posted by smoothy8500
                              I don't think he's ever given a clear description...
                              I support this message.
                              Randall Rausch

                              AR work: www.ar15barrels.com
                              Handguns: www.handgunbarrels.com
                              Bolt actions: www.700barrels.com
                              Foreign Semi Autos: www.akbarrels.com
                              Most work done while you wait on a scheduled shop visit.

                              Comment

                              Working...
                              UA-8071174-1