Hornady case feeder died

[nn3453]

I've loaded about 2000 rounds using mine.

I was loading some 45 for a match tomorrow. Loaded about 50 rounds, ran just fine. Then the motor just stopped turning. Removed the plate, still no luck. I think the motor's gone. So %#@$$# right now.

Gonna call Hornady customer service Monday. No chance I'd be able to shoot tomorrow since rules require that you only shoot plated or lead and the local shop only sells FMJ.

Not a happy camper.

Anyhow, hope your weekend is better gents/ladies.

[pdq_wizzard]

I have never used a Hornady, but can't you just manually put the cases in?

[mattman]

Glad I bought the Dillon instead. 35,000 rounds and still turning.

[nn3453]

I have never used a Hornady, but can't you just manually put the cases in?

Yes, I could. It's a ***** when you're reloading pistol. Might do that after this beer.

[LGB Loader]

Hey 3453...

I know what you mean, I had the LNL AP a few years back and it is a pain to load bullets and brass with the same hand (left) only.

Cool off with that beer and then go slow, Mate. you can do it even though it may take 4 to 6 times longer...

Good luck and good shooting at the match.

LGB

[nn3453]

Hey 3453...

I know what you mean, I had the LNL AP a few years back and it is a pain to load bullets and brass with the same hand (left) only.

Cool off with that beer and then go slow, Mate. you can do it even though it may take 4 to 6 times longer...

Good luck and good shooting at the match.

LGB

Thanks. Got about 250 rounds done so should be set for tomorrow.

Nite.


Hope Hornady will fix it for me fast and free. So far their customer service has been top notch.

[fairfaxjim]

Thanks. Got about 250 rounds done so should be set for tomorrow.

Nite.


Hope Hornady will fix it for me fast and free. So far their customer service has been top notch.

Please update this post with the results of your experience with them.

[gruntbull]

I set up the seating die in 4th stage, and seat bullets with the right and place brass with the left, so my right comes off the handle places a bullet and then pulls the handle. I can get about 300 out an hour if all my dies stay, and my powder is measuring good.

If you wish to sell the dead feeder shoot me a PM

[Roccobro]

I'm thinking its prolly a simpler interrupter switch, not the motor. You'd smell some burning electronics scents if the motor went.

Justin